BM PRO BatteryPlus35SR Guida utente
SYSTEM MANUAL
Trek + RVView
INCLUDING
BatteryPlus35
ABrand
www.teambmpro.com
2
Accessories
Accessories provided with this product are:
System Manual
About the BatteryPlus35 Power Supply
The BatteryPlus35 is a smart charger with a distribution system which has been
designed for use in recreational vehicles. The unit operates from 100VAC to 240 VAC
and provides an isolated DC output at 35A maximum (derates to 32A at high ambient
temperature) for powering the loads, out of which a limited amount of current is
reserved for charging the caravan battery. All the necessary protection and operating
features for the load and battery are provided. BatteryPlus35 uses electronic fuses
to protect the wires connected to the loads.
A DC input is also provided to enable battery charging and powering of the load from
an external source, such as a car.
BatteryPlus35 has a solar input. Solar panels can be connected directly to
BatteryPlus35SR or BatteryPlus35HA, an external regulator must be installed for
BatteryPlus35PM, See table below.
MPPT- Maximum Power Point Tracking
The unit is fully enclosed ready for direct wall mounting. All connections are at the
base of unit providing convenient wiring and installation.
Note: When a BatteryPlus35PM is powered for the first time, the red LED will blink
for 30s, then resume normal LED pattern.
BatteryPlus35PM BatteryPlus35SR BatteryPlus35HA
Solar MPPT No Yes Yes
Solar Input External Regulator
required
Direct Solar Panel
connection
Direct Solar Panel
connection
Battery Chemistry Lead-Acid Only Lead-Acid Only Lead-Acid
LiFePO4
Absorption Charging
Current Max 20A 20A 30A
AX-Solar Blending Yes Yes Yes
3
Other Accessories that are sold separately:
Trek
Displays Battery voltage, Battery charging and discharging currents, Auxiliary and
solar currents, Battery charge status, Time remaining to discharge, Level indication
of up to 4 water tanks, Time am/pm, Water pump status and Battery on/off status. It
also features Back light which can be set as a night light, Button to control 2 water
pumps through BatteryPlus35, Button to disconnect the battery from the loads.
RVView
Display that shows System voltage, Input and output current, Battery charging and
discharging indicator, Power Source – Mains, Solar or Car, Warning indicator and
Battery charge status.
4
BatteryPlus35
Accessories 2
About the BatteryPlus35 Power Supply 2
Safety Precautions 8
Name and Function of Parts 9
Installing BatteryPlus35 Power Supply 10
Personnel 10
Ventilation, Orientation, and Thermal Considerations 10
Mounting 11
Mains Cable 12
Wire Size 12
Load Connections 12
Caravan Battery Connection 13
AX (Auxiliary) DC Input Connection 13
Solar Connection 13
Remote Load-Isolator Switch Connection 15
Communication Bus Connection 15
Installing Controllable Pumps 15
Battery Connection/Disconnection Procedure 18
Batteries 19
CONTENTS
5
Servicing 20
Functional Description 21
Functional Diagram 21
AC/DC Power Supply 22
Multiple Inputs and blending 22
Fault Protection 23
Fusing 23
Low Voltage Disconnect Modes 24
Battery Charging Management 25
AC Mains Charging 25
Solar Charging 25
AX Charging 26
Charging Profile 26
Charging time 26
System Status Indicator 28
Load output status indicators 28
Specifications 29
6
CONTENTS
Trek
Introduction 31
Safety Precautions 31
Accessories 31
Other Required Items 31
About Trek 32
Glossary 32
Name and Function of Parts 33
Operation 34
On Power Up 34
Description of Display Elements 35
Description of Buttons 37
Setup Mode 38
Enabling Setup Mode 38
Setup Menu 38
Clock Menu 39
Water Tank Menu 40
Battery Capacity Menu 41
Battery Alarm Menu 41
LCD Backlight Menu 41
New Battery Installation 42
Connectors 42
Installing Trek 43
Servicing 46
Specifications 46
After-Sales Service 46
Appendix 1: Advanced Menu 47
7
RVView
Introduction 49
Safety Precautions 49
Accessories 49
About RVView 49
Name and Function of Parts 51
Operation 52
Description Of Display Elements 52
Connectors 54
Servicing 54
Specifications 54
Repairs and After-Sales Service 54
Troubleshooting 55
RVView Installation Instructions 55
Manual Part #030333-B
The BMPRO BatteryPlus35 (BatteryPlus35), Trek and RVView are proudly Australian-made products manufactured in
Melbourne, Australia. Designed by Setec, one of Australia’s leading power solutions experts. They represent a high quality
product that will provide years of service.
Copyright © Setec 2017
Disclaimer
Setec accepts no liability for any loss or damage, which may occur as a result of improper or unsafe use of its products.
Warranty is only valid if the unit has not been modified or misused by the customer.
Important Note:
Trek is only designed to work in conjunction with the BatteryPlus35 supply/charger. It will not interact with other products.
Warranty Terms & Conditions 58
8
SAFETY PRECAUTIONS
Failure to observe these instructions properly may result in property
damage or personal injury, which may be serious depending on the
circumstances.
Correct installation is the most critical factor in ensuring the safe use of the power supply.
If every consideration of these instructions has been satisfied the power supply will be safe
to operate.
Ensure that there is always good ventilation for the battery and the power supply.
Take care as dropping or touching of metal objects onto the battery terminals may cause
short circuits. Remove any personal metal adornment such as a chain, watch or ring, which
could cause short circuits and personal injury.
Batteries are electrically live at all times and must be treated with extreme caution. They can
supply high short circuit currents, even if they appear damaged or undamaged.
Before servicing a battery, disconnect the power supply from all power sources.
Do not attempt to charge non-rechargeable batteries. Charging a non-rechargeable battery
risks the battery catching fire or possible explosion.
Do not allow water or other liquids to enter the power supply area.
Do not drop or shake the product vigorously as this may cause damage to the product. Do not
shock the equipment, batteries and charger, as this may cause device or battery failure, fire
or explosion.
Stay away from magnetic equipment; radiation may erase information stored on the device.
Please note that the battery can only reach top performance level after it has been fully
charged and discharged two or three times.
Keep the device dry; do not expose it to water. Do not use it where it can fall into water (such
as near a pool, pond, bath etc.). Do not let the device, battery or charger come into contact
with water vapour or operate it with wet hands. Contact with water will cause the device to
short-circuit, corrode or cause electric shock.
Do not use this product where it is excessively hot, cold, dusty or humid, or where it is
exposed to strong magnetic fields or long periods of sunshine. Such exposure may cause
device or battery failure, fire or explosion.
Only use the device with the battery and cable supplied. Use of other accessories not
recommended in this manual may cause damage to the unit and will void the warranty.
Clean the housing of the device lightly with a dry or moist cotton cloth. Do not use alcohol,
thinners, benzene or any other chemical cleaner.
This device is a high precision electronic product. It contains no user-serviceable parts
inside. Do not try to dismantle, modify or repair it yourself. Disassembly by unauthorised
persons will void the warranty.
Specifications are subject to change and improvement without notice.
CAUTION
Please read the Safety Precautions carefully before installing the power supply.
Be sure to observe all precautions without fail.
9
1
2
310
9
8
7
5
6
4
13 14
11
12
Mains Cable (permanently
connected)
240 V or 110 V input power for
charging the caravan battery and
powering loads
Load Terminal Block, Common
Negative Connection
Used for connecting the negative
wire of the 12 V loads
Load Outputs, 15A x 2 Positive
Connections
Used for connecting the positive
wire of the 12 V loads. Output 1 is a
persistent output.
Load Outputs, 10A x 12 Positive
Connections
Used for connecting the positive
wire of the 12 V loads
AX+ and AX- (Auxiliary)
Connection point for external DC
input positive and negative wire
BATT+ and BATT-
Connection point for battery positive
and negative terminal. Attach fuse
to Batt+ wiring
Remote Switch Terminal Block (RSW)
Terminal block for connecting an
optional remote switch. This switch is
used to enter into storage mode
Not in use
Communication Bus Connector
To connect BMPRO by Setec
accessories such as the Trek
Not in use
Mounting Hole (x4)
System Status Indicator
Multi-colour LED status indicator
Load Output Status indicators
When the LEDs are green, the loads
are OK. If the LEDs are red, then there
is a fault. If the LEDs are off then loads
are off
Solar Panel Connection
This connection is for the solar input,
see Solar Connection section.
1 7
2
8
3
9
4
11
10
5
12
13
6
14
Name and Function of Parts
10
INSTALLING BATTERYPLUS35 POWER SUPPLY
Personnel
Installation is to be carried out only by suitably qualified personnel.
Ventilation, Orientation, and Thermal Considerations
The preferred orientation is with the load connection at the bottom, as shown in
Figure 1: Recommended Mounting Holes, and located such that there is a minimum
of 80 mm free air space from all vented sides of BatteryPlus35. This allows for the
lowest operating temperature of the internal electronics and highest reliability of the
product.
The final enclosure must also provide adequate ventilation to the outside world (or
larger internal cavity) to prevent excessive heating of the air within the enclosure.
At normal room temperature (25°C), the unit is rated to provide full power in both
vertical and horizontal orientations. At elevated temperature up to 50°C, the output
current is de-rated to 32A.
The enclosure air temperature can easily exceed 50°C if
adequate ventilation is not provided.
WARNING
The unit has over-temperature protection, meaning it will
shut down if its internal temperature rises above a safe
level. The unit will automatically restart once it has cooled
to an acceptable level.
WARNING DO NOT install BatteryPlus35 in the same compartment
where flammable material such as petrol is stored.
WARNING Ensure that the BatteryPlus35 is not exposed to any
liquids during installation or the installed environment.
Altri manuali per BatteryPlus35SR
1
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali BM PRO Caricabatterie per batterie
BM PRO
BM PRO ProBoost25 Manuale utente
BM PRO
BM PRO MiniBoostPRO Manuale utente
BM PRO
BM PRO BatteryCharge4 Manuale utente
BM PRO
BM PRO MiniBoostPRO Manuale utente
BM PRO
BM PRO BatteryCharge15 Manuale utente
BM PRO
BM PRO BatteryCharge7.5 Manuale utente
BM PRO
BM PRO MiniBoost Manuale utente
BM PRO
BM PRO MiniBoost Manuale utente
BM PRO
BM PRO MiniBoost Manuale utente
