PRODUCT SPECIFICATIONS
ABOUT THIS PRODUCT -Bodine’s PACESETTERTM “NANO” series
inverter is a PWM type inverter that converts a single phase AC input
voltage into an adjustable frequency three phase AC output voltage.
Since the speed of AC induction motors is proportional to the line
frequency, adjusting the output frequency of the inverter enables
adjustable speed operation of the motor.
2701 2703
Motor HP 1/4 1/2
Motor kW 0.2 0.4
Output Amps 1.4 2.3
Input Volts Single phase 100-120V (+10%-15%) , 50/60Hz (+/-5%)
Output Volts Three phase 200-240V +10%-15% (Input Voltage Max)
Ratings
Weight, Lb (Kg ) 1.5 (0.7) 1.6 (0.72)
Carrier Frequency 1 –16 kHz
Frequency Control Range 0 –200 Hz
Frequency Resolution Digital: 0.1 Hz (0 -99.9Hz); 1 Hz (100~200Hz)
Analog: 1 Hz / 60Hz
Frequency Setting Signal Keypad or external signal (0-10 V, 4–20 mA, 0–20 mA)
Accel / Decel Time 0.1 -999 Seconds
Braking Torque About 20% without external braking resistor (no provisions
for external resistor)
Control
Characteristics
V/F Pattern 3 Patterns each for 50 Hz & 60 Hz
Overload protection 150% for 1 min.
Over-voltage DC voltage > 410V
Under voltage DC voltage < 200V
Momentary
Power Loss 0 -2 seconds: inverter can be restarted by speed search
Stall Prevention Accelerate / Decelerate / Constant speed
Output terminal
short-circuit Electronic circuitry protection
Grounding fault Electronic Circuitry protection
Protection
features
Other function Heat sink temperature protection, Current limit
Indication function 3 character LED display indicates frequency or inverter
parameter or fault record or program version.
Inputs 2 multi-function, PNP type (source)
Output 1 multi-function
Torque control Torque boost level adjustable (manual torque boost)
Operation
Conditions
Other function Decelerate or free run stop, Auto reset, DC braking
frequency / Voltage / Time can be setup by constants.
Ambient Temperature -10 to +40OC
Humidity 0 -95% RH non-condensing.
Vibration Under 1 G (9.8 m/s2)
Enclosure IP20
Dimensions, W x H x D 2.83” x 5.20” x 4.64” (72 mm x 132 mm x 118 mm)
Environmental
Conditions
Mounting Install by mounting screw or DIN rail (Option).
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
