Body flex BRF 700 Manuale utente
BRF 700
Fan Bike
OWNER’S MANUAL
* This item is for consumer use only and it is not meant for commercial use.
This page intentionally left blank
General Information
BRF 700 Page 1
Warranty
Body Flex Sports warrants your product for
a period of 1 year for the frame and 90 days
on all parts if the item is used for the intended
purpose, properly maintained and not used
commercially. Any alterations or incorrect
assembly of the product will void this warranty.
Proof of purchase must be presented for any
warranty validation (no exceptions). This
warranty applies to the original purchaser only
and is not transferable.
This warranty does not cover abuse or defects
caused during use, storage or assembly.
During the warranty period, Body Flex Sports
reserves the right to:
a). provide replacement parts to the
purchaser in an effort to repair the item.
b). repair the product returned to our
warehouse (at the purchaser’s cost).
c). replace the product if neither of the two
previously mentioned actions effect repair.
This warranty does not cover normal wear and
tear on upholstery.
Questions
If you have any questions concerning the
assembly of your item or if any parts are
missing, please DO NOT RETURN THE
ITEM TO THE STORE OR CONTACT THE
RETAILER. Our dedicated customer service
staff can help you with any questions you may
have regarding the assembly of this unit and
can also mail you replacement parts.
Customer Support
Customer Support is open 9:00 a.m. to 5:00
p.m. (Pacic Time) Monday through Friday.
Please contact us by any of the following
means.
Body Flex Sports, Inc.
21717 Ferrero Parkway, Walnut, CA 91789
Telephone: (888) 266 - 6789
Fax: (909) 598 - 6707
Email: info@bodyexsports.com
Safety
Before you undertake any exercise program,
please be sure to consult with your doctor.
Frequent strenuous exercise should be
approved by your doctor and proper use
of your product is essential. Please read
this manual carefully before commencing
the assembly of your product or starting to
exercise.
• Please keep all children away from this item
when in use. Do not allow children to climb or
play on them when they are not in use.
• Supervise teenagers while they use this unit.
• For your own safety, always ensure that there
is at least 3 feet of free space in all directions
around your product while you are exercising.
• Regularly check to see that all nuts, bolts and
ttings are securely tightened. Periodically
check all moving parts for obvious signs of
wear or damage.
• Clean only with a damp cloth, do not use
solvent cleaners. If you are in any doubt, do
not use your product; contact CUSTOMER
SUPPORT.
• Before use, always ensure that your product
is positioned on a solid, at surface. If
necessary, use a rubber mat underneath to
reduce the possibility of slipping.
• Always wear appropriate clothing and
footwear such as training shoes when
exercising. Do not wear loose clothing that
could become caught in moving parts during
exercise.
• Do not use this unit if it is not functioning
properly or if it is not fully assembled.
• Do not use this unit for commercial purposes.
Storage and Use
Your product is intended for use in clean
dry conditions. You should avoid storage in
excessively cold or damp places as this may
lead to corrosion and other related problems.
Weight Limit
Your product is suitable for users weighing:
250 pounds or less.
Hardware & Tool List
BRF 700 Page 2
a moment to familiarize yourself with these items.
PLEASE NOTE: some of these parts may have already been pre-assembled on your unit.
The following hardware is used to assemble your unit. Please take
S10-S13-S15-S17-S19 [1 piece]
BRF 700 Page 3
BRM 3670 Stride Cycle Page ?
Parts Listing
# Description # Description
1 Main Frame 21 Big Washer
2 Front Stabilizer 22 Bushing
3 Rear Stabilizer 23L Left Nylon Nut
4L Left Handlebar 23R Right Nylon Nut
4R Right Handlebar 24 Bolt (M8x16 mm)
5 Seat Tube 25 Spring Washer (M8)
6L Left Linkage 26 Carriage Bolt (M10x57 mm)
6R Right Linkage 27 Arc Washer (M10)
7L Left Pedal 28 Cap Nut (M10)
7R Right Pedal 29 Special Washer
8 Monitor 30 Round Cap (50)
9 Seat 31 Front Roller
10 Washer (M8) 32 Hex Bolt (M6x48 mm)
11 Nylon Nut (M8) 33 Nylon Nut (M6)
12 Bellows 34 Bushing
13 Bolt (M10x18 mm) 35 Bearing
14 Spring Washer (M10) 36 Tension Control
15 D Shape Washer (M10) 37A Monitor Wire (Lower)
16 Handlebar Axle 37B Monitor Wire (Upper)
17 Knob (M12) 38 Friction Belt
18 Bolt (M8x43 mm) 39 Bushing
19 Washer (M8) 40 Foam Grip
20 Nylon Nut (M8) 41 Round Cap (25)
BRF 700 Page 4
Exploded Diagram
BRF 700
Assembly Instructions
Assembly Step 1Hardware Required
55
40
1 2 3 4
55
40
1 2 3 4
Page 5
２
２
２
Secure the Front Stabilizer (#2) to the Main Frame (#1)
with two Carriage Bolts (#26),twoArc Washers (#27) and
two Cap Nuts (#28).Note: There are built in rollers on the
Front Stabilizer (#2) to easily relocate the fan bike.
BRF 700
Assembly Instructions
Assembly Step 2 Hardware Required
55
40
1 2 3 4
55
40
1 2 3 4
Page 6
４
４
４
Secure the Rear Stabilizer (#3) to the Main Frame (#1)
with four Bolts (#24),fourSpring Washers (#25) and four
Washers (#19).
BRF 700
Assembly Instructions
Assembly Step 3Hardware Required
55
40
1 2 3 4
55
40
1 2 3 4
Page 7
２
２
１１
Attach the Right Pedal (#7R) to the Right Linkage (#6R)
with a Bushing (#22) and a Big Washer (#21) in between.
Then screw the Right Pedal (#7R) tightly into the right
crank and then secure it with the Right Nylon Nut (#23R).
Repeat this process on the other side.
Please Note:
•Left Hand Side: Turn COUNTERCLOCKWISE to tighten the
Left Pedal (#7L) on the left crank. Then turn CLOCKWISE to
tighten the Left Nylon Nut (#23L) [BLUE inner nylon ring] to
secure the left pedal assembly.
•Right Hand Side: Turn CLOCKWISE to tighten the Right Pedal
(#7R) on the right crank. Then turn COUNTERCLOCKWISE to
tighten the Right Nylon Nut (#23R) [WHITE inner nylon ring] to
secure the right pedal assembly.
BRF 700
Assembly Instructions
Assembly Step 4Hardware Required
Remove the two Special Washers (#29), two D Shape washers
(#15), two Spring Washers (#14) and two Bolts (#13) that are
pre-assembled on the Handlebar Axle (#16). Insert the Handlebar
Axle (#16) through the Main Frame (#1). Make sure the Handlebar
Axle (#16) is centered. If you encounter too much friction, try using
WD40 or Vaseline as a lubricant. Insert two Special Washers (#29)
that were just removed on the Handlebar Axle (#16) followed by
Right Handlebar (#4R) and Left Handlebar (#4L) on each side and
then secure them with two D Shape washers (#15), two Spring
Washers (#14) and two Bolts (#13) that were just removed.
Then attach the Right Handlebar (#4R) to the Right Linkage (#6R) with a
Washer (#19) in the between, secure with a Bolt (#18),aWasher
(#19) and a Nylon Nut (#20).
Carefully cut off the zip tie on the bushing of the Right Linkage (#6R)
55
40
1 2 3 4
55
40
1 2 3 4
Page 8
２
４
２
２
２
２
２
Altri manuali per BRF 700
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Body flex Cyclette
