Bodyworx JX335 Manuale utente

INDEX

1. Overview Drawing...................................................錯誤! 尚未定義書籤。

2. Important Safety Instructions........................................................................3

3. Grounding Instructions.................................................................................4

4. Pre-Assembly Check List ........................................錯誤! 尚未定義書籤。

5. Assembly Steps.............................................................................................7

6. Caution..........................................................................................................8

7. Maintenance..................................................................................................9

8. Computer Operation Instructions.....................................錯誤! 尚未定義書籤。

1. Overview Drawing

Safety Key / Clip

Computer Console

On-off Switch

Circuit Breaker

Grip Pulse Sensor

Frame

Rear End Cape

2. IMPORTANT SAFETY INSTRUCTION

When using this product, basic precautions should always be followed, including the

following:

Please read the instruction carefully before starting to use this product.

Danger– To reduce the risk of electric shock：

1. Always unplug this product from the electrical outlet immediately after using and before

cleaning the treadmill.

Warning – To reduce the risk of burn, fire, electric shock, or physical injury：

1. The product should never be left unattended while plugged in. Unplug the product from the

outlet before taking on or off the clothes and other belongings.

2. To avoid any danger, close supervision is necessary when children, invalids, or disabled

persons is using or approaching this product.

3. Be sure to use the product only for its intended use as described in this manual. Do not use any

attachment not recommended by the manufacturer in order to avoid any danger or accidents.

4. Never operate the product if it has a damaged cord or plug, is not working properly, damaged,

or dropped into water. Please return the product to the service center of seller for examination

and repair.

5. Do not carry this product by the power cord or use the cord as a handle.

6. Keep the cord away from hot surfaces or ground.

7. Never operate the product with the air vents on the treadmill blocked. Keep the air vents free

of lint, hair, etc.

8. Never drop or insert any objects into any went of the treadmill.

9. Do not use or operate outdoors.

10. Do not operate where aerosol (spray) products are being used or where oxygen is thin.

11. Before turning the product off, turn all switches to the off position then remove the plug from

the outlet.

12. Connect the product to a properly grounded outlet only.

13. This machine is intended for household use only.

14. If the power cord is damaged, be sure to ask the manufacturer for replacement to avoid

accidents.

3. GROUNDING INSTRUCTION

This product must be grounded. If the treadmill should be malfunction or breakdown, grounding

provides a path of least resistance for electric current to reduce the risk of electric shock.

This product contains a power cord with a grounding conductor and a grounding plug.

The plug must be plugged into a correct outlet that is properly installed and grounded.

Danger— Improper connection of the grounding conductor can result in a risk of electric shock.

Check with a professional electrician or serviceman if you doubt whether the product is properly

grounded. If the grounding plug enclosed in the product doesn’t fit the outlet, have a proper outlet

installed by a qualified electrician.

This product is for use on a normal 220V~240V circuit and contains a plug that looks like the one

illustrated in the drawing. Make sure that the product is connected to an outlet with the same

configuration as the plug.

No adapter should be used with the product.

DRAWING

GROUNDING METHODS

GROUNDED

OUTLET

4.PRE-ASSEMBLY CHECK LIST

ITEM Description Qty

A Computer Console 1

B Frame 1

C Upright(L) 1

D Upright(R) 1

ITEM Description Qty

a Truss Hex ScrewM8xP1.25x15 12

b Hex Wrench 6mm 1

c Hex Wrench 5mm 1

d Safety Key/Clip 1

e SILICON 1

f Bottle 1

g Truss Hex Screw M8xP1.25x40 4

5.Assembly Steps

Two persons are required to finish the assembly

steps.

(Caution!! Please follow exactly the assemly steps

below to aviod injury. )

1. Pull the Control Cable out through with the

Guide Thread in the Right Upright (D), then insert

the Left and Right Uprights (C, D) into the Main

Frame and tighten with Truss Hex Screw(a)

according to the right drawing.

Ps.1. To avoid unexpected accident, always

assemble the treadmill with an assistant, do

not assemble by oneself.

Ps.2. When assembling the Upright, one person

should hold the Upright. Pay special

attention to prevent it from falling.

2. To assemble the Computer Console：

Connect the Control Wires between the

Uprights and the Computer Console, then

insert the Uprights (C,D) into the Computer

Console (A) and secure with Truss Hex

Screw (g) according to the right drawing.

6.Caution

Note: The Cylinder contains high pressure gas. Please

avoid crash with other objects to avoid danger.

Note: If the cylinder is hit, it might be damaged and cause

the usage not smooth. The treadmill might fall while

folding.

This treadmill has the foldable mechanism for storage.

Stop all movement (include treadmill stop the belt and take

off the power cord) before storage, then fold the main

frame as the direction shown in the picture. Be sure the

fixing plate inserts the tube of base frame. On the contrary,

if you want to use treadmill, step on the fixing plate as the

direction shown in the right drawing. When it disjoins

from tube of base frame, pull down the main frame as

shown at the right drawing. Please stand beside the

treadmill and the main frame will be slowly landing to the

ground automatically.

(Ps.1. To prevent from danger, be careful if the kids are

around. If you want to move the treadmill, fold the

treadmill, let hands hold on rear adjust box, then

make the treadmill decend until the wheels can be

moved smoothly, then you can move the treadmill.)

(Ps.2. DO NOT move the treadmill on uneven ground.)

(Ps.3. To avoid the injury, do not stand under the frame

when the frame is descending.)

7.Maintenance

1. If the belt tends to move off from the center, stop the

treadmill. Take the Hex Wrench and adjust the Hex Screw in

the Rear End Cap. For example, if the running belt is moving

towards the left side, tighten the left Hex Screw about 1/4

turn (clockwise). If the running belt is moving towards the

right side, tighten the right Hex Screw about 1/4 turn

(clockwise). Turn on the treadmill after it has been adjusted.

If you find that the belt has not moved to the proper position,

please repeat the steps above. Don’t use the treadmill until

the running belt returns to the center position.

(Ps.1. This procedure is very important, if the belt is not in the

center, be sure to follow the above steps.)

(Ps.2 The position of running belt might not stay precisely

in the center with slightly towards the left and right

sides, and the situation varies with how end-users

use and the weight of end-users. No need to adjust the

belt if it doesn’t rub against the parts aside.)

2. Depending on the usage of the product, please apply

SILICON on the board according to the below chart. Use

the Hex Wrench to unscrew the bolt inside the Rear

Roller. Then pull the belt up and daub some SILICON to

the center of the board.After that, adjust the belt to the

center of the deck, followed by tightening the screw to the

original set.

(Ps. When the belt is sliding, please follow the above

method to lubricate the running belt.)

KGS/LBS Speed Interval

6KM/hr Below 1 year

6~12KM/hr 6 months

KGS 12KM/hr Above 3 months

4mile/hr Below 1 year

4~8mile/hr 6 months

LBS 8mile/hr Above 3 months

ote: This maintenance is intended fo

household use.

If used for business, it is suggested to

examine the product every other month.

Indice

Altri manuali Bodyworx Tapis roulant

Bodyworx

Bodyworx ATLANTA Manuale utente

Bodyworx

Bodyworx J1530CA Manuale utente

Bodyworx

Bodyworx TM3000 Manuale utente

Bodyworx

Bodyworx JX200 Manuale utente

Bodyworx

Bodyworx JT175 Manuale utente

Bodyworx

Bodyworx JI1830M Manuale utente

Bodyworx

Bodyworx JI2040 Manuale utente

Bodyworx

Bodyworx J4715 Manuale utente

Bodyworx

Bodyworx JSPORT3000 Manuale utente

Bodyworx

Bodyworx JT8500 Manuale utente

Bodyworx

Bodyworx J1530CA Manuale utente

Bodyworx

Bodyworx J1325CAQ Manuale utente

Bodyworx

Bodyworx JTM1500 Manuale utente

Bodyworx

Bodyworx COLORADO175 Manuale utente

Bodyworx

Bodyworx JX325 Manuale utente

Bodyworx

Bodyworx JX150 Manuale utente

Bodyworx

Bodyworx JX740 Manuale utente

Bodyworx

Bodyworx JX150 Manuale utente

Bodyworx

Bodyworx JX125 Manuale utente

Bodyworx

Bodyworx J1650EA Manuale utente

Bodyworx

Bodyworx Colorado 300 Manuale utente

Bodyworx

Bodyworx JTM2500 Manuale utente

Bodyworx

Bodyworx J1621EA Manuale utente

Bodyworx

Bodyworx JI1825 Manuale utente

Manuali Tapis roulant popolari di altre marche

Treadly

Treadly TREADLY 2 Manuale utente

HEALTH ONE

HEALTH ONE Walk Ro Manuale utente

NordicTrack

NordicTrack NTL12941 Manuale utente

NordicTrack

NordicTrack T7.5 S Manuale utente

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Manuale utente

Merax

Merax MS282992 Manuale utente

FYTTER

FYTTER RU-2SX Manuale utente

Precor

Precor 903 Manuale utente

FitLogic

FitLogic freewill d225 Manuale utente

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Manuale utente

Horizon Fitness

Horizon Fitness Adventure 5 Plus Manuale utente

Stamia

Stamia InMotion II Manuale utente

Smooth Fitness

Smooth Fitness EVO 3i Manuale utente

NordicTrack

NordicTrack NETL81810.0 Manuale utente

Schwinn

Schwinn 830/Journey 8.0 Manuale utente

Keys Fitness

Keys Fitness HealthTrainer HT-740T Manuale utente

Spirit

Spirit XT8 Manuale utente

NordicTrack

NordicTrack T 14.0 Treadmill Manuale utente