In menu mode, it is for menu selection, and up and down buttons for menu operation of
the same level. When there is no sub-menu, adopt the left and right buttons to switch
options; when there is a sub-menu, adopt the right button to enter into the next level of
menu operation. Enter (in the middle) button is adopted to confirm the selection and
return to the upper level.
When a temperature measurement point is selected, press the menu button to pop out
the attribute dialog box, select from the four direction buttons to move the point.
When the temperature measuring line is selected, press OK button to pop out the
attribute dialog box. Press S button to switch the line position or length, and select from
four direction buttons to move the line position or change the length.
When the temperature measuring area is selected, press OK button to pop out the
attribute dialog box. Press S button to switch the area position or size, and select from
four direction buttons to move the area position or change the size.
Up, down, left and right buttons can also be defined as shortcuts. For details, refer to
the definition of trigger button.
[6] Trigger/Shortcuts
As a customize shortcut button, trigger button can be defined with the functions below:
Lighting –press the button to turn on light, and press again to turn off the light.
Temperature measurement point, temperature measurement area - press once to add a
temperature measurement point or area, and then press once to delete a temperature
measurement point or area.
Image capture, record –press once to save the image or start recording.
Zooming –press once to zoom in or out the infrared image.
Increase or decrease LCD brightness - press once to increase or decrease
LCD brightness.
[7] Microphone
For voice annotation when saving images.
5
