Boly ScoutGuard BG330 Manuale utente
Trail Camera - BG330
BG330 User Manual
Est. 2007
CAMERA TRAPS cc
www.cameratraps.co.za
+27(0)83 560 0555
+27(0)82 422 0356
Trail Camera - BG330
1
Table of Contents
1. Getting Started.......................................................................... 2
2. Camera Operations.................................................................4
2.1 Batteries / Power Supply............................................4
2.2 SD Card Information................................................... 4
2.3 Camera Modes................................................................5
3. Camera Setup Settings & Display..........................................
7
3.1 Settings Interface & Display...................................... 7
3.2 Manual Image / Video Capturing........................... 8
3.3 Manage Images and/or Videos................................8
3.4 Camera Setup Options................................................ 8
4. Trouble Shooting................................................................... 12
5. Additional Information.......................................................13
6. PIR Detection Zone...............................................................14
7. Technical Specifications..................................................... 15
Trail Camera - BG330
2
1. Getting Started
Battery Tray
Latch
Trail Camera - BG330
3
External AC/DC connector (4*1.7mm)
Trail Camera - BG330
4
2. Camera Operations
2.1 Batteries / Power Supply
The camera is powered by four AA batteries. High-density,
high-performance alkaline, Lithium or high capacity (min
2600mAh) NiMH rechargeable batteries are recommended.
When the batteries are low, the camera will beep twice and
automatically shut down.
A DC 6-Volt, 2 Amp external power supply adapter can also be
used to power the camera (not included).
2.2 SD Card Information
To take full advantage of the latest technologies, we
recommend Class 10 SD cards or better, which have fast
transfer speeds and long durability for extensive shooting in the
most extreme outdoor conditions. Secure Digital High Capacity
(SDHC) PRO cards work with SDHC compatible devices only.
Please check that your product is compatible with SDHC cards.
Insert the SD card into the camera before turning on
the camera
This camera supports up to a 32GB capacity SD card and has no
built-in internal memory. The camera will not function without
the SD card properly inserted into the camera.
Trail Camera - BG330
5
Make sure the SD card is unlocked before inserting it
into the camera
The camera will operate normally with a locked SD card
inserted, but the card will not be able to store captured images
or videos taken by the camera.
Do not remove the SD card while the camera is on
By removing the SD card while the camera is on risks damaging
the internal components of the camera.
If you experience any problems with an inserted SD
card
Try reformatting the SD card utilizing the camera’s main
settings option.
2.3 Camera Modes
The different modes are accessed by pressing the OK button,
marked on the camera:
SETUP Mode/Test Mode
To turn on the camera, press and hold the OK button, until the
display screen activates. In this mode you can customize the
camera settings,or play back pictures and videos the camera
has taken on the LCD display. After switching the camera to the
ON position and if the camera is left alone for more than 20
seconds, the camera will automatically switch to "Hunting"
Mode, as described below.
Trail Camera - BG330
6
On / Hunting Mode
The camera will take pictures or video clips when motion
is detected and/or at specific time intervals, according to the
programmed settings. "On / Hunting" mode is automatically
activated, if the camera is turned on and left alone for 20
seconds. Before entering On / Hunting Mode, the front (red)
LED light will continuously blink for approximately 10 seconds
and then turn off. This preset time allows you to adjust
the camera’s position if needed, before the camera becomes
active. To “wake” the camera and access the camera menu
functions, press and hold the OK button, until the display
becomes active.
OFF Mode
To turn off the camera when the display screen is active, press
and hold the OK button until the screen powers off. The camera
will still consume a small amount of battery power while in OFF
mode - It is recommended to remove the batteries, if the
camera will not be used for a long period of time.
Trail Camera - BG330
7
3. Camera Setup Settings & Display
3.1 Settings Interface & Display
To update the camera settings, turn the camera on to activate
the display screen.
OK/Power: Save parameter settings and view pictures
Settings/Sprocket: Switch between Test/Setup and On modes
►: Capture a photo or record a video manually
When the camera is in ON Mode, the screen will activate and
display the following:
Trail Camera - BG330
8
3.2 Manual Image / Video Capturing
Place the camera in ON mode and press ►to manually
capture photos or record video. Press ►again to stop
capturing video.
3.3 Manage Images and/or Videos
Place the camera in TEST/SETUP mode and press
OK/POWER button to view images or videos.
The latest image or video will be shown on the LCD screen.
Press the ►or OK/POWER buttons to cycle through the
pictures and videos taken.
NOTE: Video cannot be viewed directly through the
camera.
3.4 Camera Setup Options
To view the camera settings menu, Press OK to “wake up”
the camera or when the screen is active, press MENU to
enter into the menu settings. Use the RIGHT key to select
the different options, press OK to save the setting and
press MENU to exit the camera settings menu.
Trail Camera - BG330
9
After changing EACH setting in the Setup menu, you must
press OK or the camera will retain the previous setting.
Main
Options
Descriptions
Language
Language options include: English, Czech,
French, German, Spanish, Swedish, and
Finnish.
Default::English
Camera
Mode
There are three camera modes:
Photo: to take the photo
Video: to capture video
Pic+Video: to take a picture with a video clip.
This mode disables the photo burst function.
Default: Photo
Photo Size
Choose the image size: 5MP, 8MP or 14MP
Default: 14MP
Video Size
Choose the video size: 1280x720 or 640x480.
Default:1280x720
Photo Burst
Choose the number of photos taken after the
camera is triggered: 1 Photo, 2 Photo, or 3
Photo. If Pic+Video is selected, Photo burst
defaults to 1 photo, regardless of entered
value.
Default:1 Photo
Video
Length
Choose the duration of the video recording:
Valid values extend from 10 to 60 seconds in 5
sec increments.
Default:5 seconds
Indice
Altri manuali Boly Telecamera di sicurezza
