Boly SG2060 Series Manuale utente
User Manual
Hunting Camera
SG560K/SG560X/SG562-C/SG2060 Series/SG562-D
Boly Trail Cameras
User Manual / www.bolymedia.com
1
Table of Contents
1.Getting Started............................................................... 2
2.Camera Operation.......................................................... 5
2.1 Batteries/ Power Supply......................................5
2.2 SD Card Information............................................5
2.3 Camera Mode......................................................6
2.4 Trigger Mode....................................................... 7
3. Camera Setup Settings and Display...............................9
3.1 Settings Interface & Display................................ 9
3.2 Manual Image / Video Capturing......................10
3.3 Manage Images and/or Videos......................... 10
3.4 Camera Setup Operation...................................11
APPENDIX.........................................................................19
Mounting the Camera............................................. 19
Technical Specifications...................................................22
Parts List.................................................................. 24
Boly Trail Cameras
User Manual / www.bolymedia.com
2
1.Getting Started
①
②
③
④
⑤
⑥
⑧
⑦
①
IR LED
②
Flash: Available for SG560X/
SG2060-X/SG562-D
③
Indication
④
Mic
⑤
PIR
⑥
Lens
⑦
Lock
⑧
Speaker:Available for SG2060Series/
SG562-D
Boly Trail Cameras
User Manual / www.bolymedia.com
3
4x1.7mm DC in
Model
Product Features
SG560K-18mHD
Black IR, 100ft detection range
SG560X-18mHD
Motion Sharp Camera, 100ft. detection
range
Boly Trail Cameras
User Manual / www.bolymedia.com
4
SG562-C
White LED Flash Camera, color pictures
and videos at night,Motion Sharp
Technology
SG562-D
Combination White LED/Xenon Flash,
color pictures and videos at night
SG2060-X
Motion Sharp 20MP Camera, Motion
Sharp Technology, Dual Focus
SG2060-U
Ultra High Quality25MP Camera, Dual
Focus
SG2060-K
Ultra High Quality 25MP , Extra long
detection range
Boly Trail Cameras
User Manual / www.bolymedia.com
5
2.Camera Operation
2.1 Batteries/ Power Supply
The camera is powered by four or eight AA batteries. -
High-density, high-performance, rechargeable Alkaline or
NiMH batteries are recommended. When the batteries are low,
the camera will beep twice and automatically shut down.
A DC 6-Volt, 2 Amp external power supply adapter (not
included) can also be used to power the camera.
2.2 SD Card Information
Insert the SD card into the camera before turning on the
camera.
This camera supports up to a 32GB capacity SD card and has no
built-in internal memory. The camera will not function without
the SD card properly inserted into the camera.
Make sure the SD card is unlocked before inserting it into
the camera.
Boly Trail Cameras
User Manual / www.bolymedia.com
6
The camera will operate properly with a locked SD card
inserted, but the card will not be able to store captured images
or videos taken by the camera.
Do not remove the SD card while the camera is on.
Removing the SD card while the camera is on risks damaging
the internal components of the camera.
If you experience any problems with an inserted SD card,
try reformatting the SD card using the camera’s main settings
option.
2.3 Camera Mode
ON Mode
The camera will take pictures or videos when motion is detected
and/or at specific time intervals, according to the programmed
settings. After switching the camera to the ON position, the
motion indicator LED (red) will blink for about 10 seconds and
then turn off. This delay time allows you to adjust the camera
position if needed, before the camera becomes active.
Boly Trail Cameras
User Manual / www.bolymedia.com
7
SETUP Mode
Customize the camera settings, or playback pictures and videos
the camera has taken on the LCD display.
OFF Mode
Turn off the camera. The camera will still consume a small
amount of battery power while in OFF mode - it is
recommended to remove the batteries if the camera will not be
used for a long period of time.
2.4 Trigger Mode
PIR Triggering: The default setting is on. If PIR Triggering is on,
the camera is only active when motion is detected. If PIR
sensitivity is set to OFF, the camera stops responding to
motion.
Timer Triggering: The default setting is OFF which means timer
triggering is disabled. When the timer triggering interval is set
Boly Trail Cameras
User Manual / www.bolymedia.com
8
to a non-zero value, the camera starts to work at a preset
interval. Users need to set the PIR sensitivity to OFF if they
want the camera to work only at preset intervals.
PIR and Timer Triggering: For both PIR triggering and Timer
triggering, users need to set PIR sensitivity to low, normal, or
high according to the external environment, and set the Timer
interval to a desired non-zero value. The camera will capture
pictures or videos in a preset time interval even if there is no
motion detected; the camera will also capture pictures and
videos if motion is detected.
Boly Trail Cameras
User Manual / www.bolymedia.com
9
3. Camera Setup Settings and
Display
3.1 Settings Interface & Display
To update the camera settings, move the power switch to the
SETUP position.
Menu: Enter the program menu in preview mode
: Exchange between playback and preview mode
DEL: Delete a photo or video
: Capture a photo or record a video manually
▼▲►◄: Navigate parameter settings
OK: Save parameter settings and play videos
When the camera is in SETUP mode, the screen will activate
and display the following:
Altri manuali per SG2060 Series
2
Questo manuale è adatto per i seguenti modelli
12
Indice
Altri manuali Boly Telecamera di sicurezza
