bon BSM-182i Manuale utente
Multi-Format Broadcast Monitor
BSM-182i, BSM-212i, BSM-242i
User’s Guide
Contents
Safety Instructions................................................................................................3
Front......................................................................................................................4
Rear.......................................................................................................................6
MENU Description................................................................................................7
VIDEO....................................................................................................................9
DIS LAY 1...........................................................................................................10
DIS LAY 2...........................................................................................................12
COLOR.................................................................................................................14
MARKER..............................................................................................................15
OSD......................................................................................................................17
AUDIO..................................................................................................................19
G I.......................................................................................................................21
SYSTEM..............................................................................................................23
USB Firmware Update........................................................................................25
External Remote Control....................................................................................26
List of Compatible Video Formats (HDMI/Composite)......................................28
List of Compatible Video Formats (SDI)............................................................29
Specifications......................................................................................................31
Dimensions..........................................................................................................32
Troubleshooting..................................................................................................33
Warranty Information..........................................................................................35
Modification of roduct.......................................................................................35
Caution on Menu Operation................................................................................35
Caution for Monitor lacement...........................................................................35
2
Safety Instructions
•To help avoid damaging your monitor, connect only one power (AC or DC) in
operation.
•Rough handling of product may cause physical damage or malfunction.
•Never insert anything metallic into the monitor openings. Doing so may create
the danger of electric shock.
•To avoid electric shock, never touch the inside of the monitor. Only a qualified
should open the monitor’s case.
•Openings in the monitor cabinet are provided for ventilation. To prevent
overheating, these openings should not be blocked or covered.
•Minimum 50cm (20 inches) room to wall is necessary to prevent overheating
when the monitor is installed to wall.
•ut your monitor in a location with low humidity and a minimum of dust. Avoid
places like damp basement or dusty hallways.
•lace the monitor on a solid surface and treat it carefully. The screen is made of
glass and can be damaged if dropped or sharply hit.
•Do not attempt to remove the back cover, as you will be exposed to a shock
hazard. The back cover should only be removed by qualified service personnel.
•Unplug the monitor power before you connect external devices to the monitor.
•If your monitor does not operate normally, or if there are any unusual sounds or
smells coning from it, unplug it immediately and contact us.
•lease do not disassemble the monitor. No service will be provided in that case.
•Displaying fixed picture for a long time may cause an afterimage or dead spots.
To recover LCD pixels, display whole white picture on screen for a n hour or
two and pixels will be recovered.
•No service will be provided for user’s own color calibration.
3
Front
Standby (Power)
In ut Switcher (SDI 1, SDI 2, HDMI/DVI)
Analog
Switch analog input in the order of CVBS1 -> CVBS2 -> CVBS3 -> SVIDEO ->
Y b r -> RGB -> VGA.
WF/VS
Waveform / Vectorscope display selection button.
Marker On/Off
Frame line generation button.
Scan
Switch scan mode among Zero Scan, Under Scan, Over Scan, ixel to ixel in HD
resolution. Zero Scan, Under Scan, Over Scan, ixel to ixel in SD resolution.
H/V Delay
Displays ancillary data by moving screen position.
R/G/B Gray
Switch for Red/Green/Blue/Gray only.
As ect
Adjust aspect ratio in the order of 4:3, 16:9, Fill, Native.
Function Keys
User-assigned function keys.
4
Menu
Enter
Knob for Adjustment or Enter
Knob used to adjust Brightness / Contrast / Chroma / hase or Enter button.
Head hone Jack
5
Rear
AC In ut
lease check ower Cord, ower Voltage, Supply power for power input are
suitable for the standard before use.
lease do not mix AC power and DC power as it may cause the defects or fire.
DC In ut
For DC power supply. Check the DC Input voltage. In case of using the Battery
power, DC 11 ~ 27V is usable.
U date Port
The Serial communication terminal that for changing the operating
program(Firmware) of the body or controlling the monitor.
Remote Ethernet Port
External control via C is able with this port by using 'Wall Control rogram'.
Firmware is also updatable through this port.
6
USB Port
USB Firmware Update ort.
MENU Descri tion
General Cautions for OSD menu or Dis lay
The menu may not be displayed even when user pressed Menu button if there's No
Signal, or in unclear signal status.
The menu selection may be saved for each input signal mode, so sometimes user
should do menu selection again.
7
VIDEO
Brightness, Contrast, Chroma, Phase, Shar ness
Adjust color representation values.
SDI Switching
Normal : Use Normal in general condition but the screen might be blinking on
screen change when you use Matrix or Routing Switcher.
Fast : Use Fast to minimize blinking on screen change.
NTSC Setu
Select IRE among 0 or 7.5 (Default)
HDMI UV Swa
Sometimes color might be swapped on some HDMI input such as C RGB. Turn
this mode on to return to correct color.
Fast Mode
Use this mode to minimize afterimage on very fast video.
Dithering
Turn this mode on to view motion pictures smoothely when the source has low
quality.
ADC Calibration
On CVBS input, turn this mode on when the color value is upside down. Normally it
is not needed to be turned on.
8
DISPLAY 1
As ect
Set the aspect ratio of the screen. 16:9, 4:3, Native(Original) are selectable. This
selection is ignored on 1080i, 1080p, 720p.
1:1 Scan
On SD signals(Not HD), Set this on to display picture in 1:1 pixel mapping.
AFD
Turn this mode on to adjust aspect ratio with the ratio value in the source signal.
Waveform Dis lay
Select waveform display mode. Choose Normal to analyze whole screen, choose
Line Select to analyze a specific line of the screen.
Waveform Line Select
Select the line when you select Line Select mode for Waveform display.
Waveform Select
Select waveform line to display among Y, Cb, Cr.
Waveform Color Mode
Select waveform color mode among Single or Mix.
9
Waveform Intensity
Adjust waveform intensity.
Waveform & Vector Size
Adjust size of Waveform & Vector.
Waveform & Vector Blend
Adjust transparency value of Waveform & Vector.
False Color
Turn False Color mode on to check exposure levels of the picture.
10
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali bon Monitor
