bon FM-055F Manuale utente
Multi-Format Field Monitor
FM-055F
User’s Guide
Contents
Safety Instructions.........................................................................................................3
Appearance...................................................................................................................4
Buttons...........................................................................................................................5
OSD Menu.........................................................................................................................6
VIDEO............................................................................................................................6
DISPLAY .....................................................................................................................9
DISPLAY 2...................................................................................................................
COLOR........................................................................................................................ 3
MARKER..................................................................................................................... 4
OSD .......................................................................................................................... 5
OSD 2.......................................................................................................................... 6
AUDIO......................................................................................................................... 8
SYSTEM......................................................................................................................20
Program Update Port (PGM).......................................................................................2
Troubleshooting...........................................................................................................22
Warranty Information...................................................................................................24
Modification of Product................................................................................................24
Caution on Menu Operation........................................................................................24
Caution for Monitor Placement....................................................................................24
2
Safety Instructions
•Rough handling of product may cause physical damage or malfunction.
•Never insert anything metallic into the monitor openings. Doing so may create the
danger of electric shock.
•To avoid electric shock, never touch the inside of the monitor. Only a qualified should
open the monitor’s case.
•Openings in the monitor cabinet are provided for ventilation. To prevent overheating,
these openings should not be blocked or covered.
•Put your monitor in a location with low humidity and a minimum of dust. Avoid places
like damp basement or dusty hallways.
•Place the monitor on a solid surface and treat it carefully. The screen is made of glass
and can be damaged if dropped or sharply hit.
•Do not attempt to remove the back cover, as you will be exposed to a shock hazard.
The back cover should only be removed by qualified service personnel.
•Unplug the monitor power before you connect external devices to the monitor.
•If your monitor does not operate normally, or if there are any unusual sounds or smells
coning from it, unplug it immediately and contact us.
•Please do not disassemble the monitor. No service will be provided in that case.
•Displaying fixed picture for a long time may cause an afterimage or dead spots. To
recover LCD pixels, display whole white picture on screen for a n hour or two and pixels
will be recovered.
•No service will be provided for user’s own color calibration.
3
Appearance
4
Buttons
Po er S itch
turns power on/off.
Menu/Exit
displays the OSD menu or exit from current menu.
Input
selects input signal.
Function 1~3
Activates/deactivates function ~3.
Audio Out
enables user monitor the audio by headphone.
USB
is used to update the firmware.
Serial
is used to update the firmware or to calibrate color.
DC Po er Port
is used to supply power to the monitor. Use up to 2V adapter or up to 8V battery.
Furthermore, tally is automatically turned on/off by tally pins.
External Po er
is used to supply power using an external battery up to 8V. Be careful on the electronic
polar direction.
5
OSD Menu
* The menu may disappear on no signal or instable signal input.
* Menu setting is saved for each input mode. So the user should make
selection on an appropriate input mode.
* If there's no picture change for long, the picture might be left
unchanged for some time.
VIDEO
Brightness
Adjust brightness.
Contrast
Adjust contrast.
Chroma (Hue)
Adjust chroma.
Phase
Adjust phase.
Sharpness
Adjust sharpness.
6
SDI S itching
Enables smooth switching on the picture if input picture source is changed quickly from
such input device as routing switcher.
SDI 3G Mode
Set this mode if the input is 3G HD SDI. SDI 3G mode support SMPTE standards listed
below:
▶A_MS1_YCbCr422_10
: 3G SDI Level-A Mapping Structure 1 YCbCr 4:2:2/10 bit
▶A_MS2_YCbCr444_10
: 3G SDI Level-A Mapping Structure 2 YCbCr 4:4:4/10 bit
▶A_MS2_RGB444_10
: 3G SDI Level-A Mapping Structure 2 RGB 4:4:4/10 bit
▶A_MS3_YCbCr444_12
: 3G SDI Level-A Mapping Structure 3 YCbCr 4:4:4/12 bit
▶A_MS3_RGB444_12
: 3G SDI Level-A Mapping Structure 3 RGB 4:4:4/12 bit
▶A_MS4_YCbCr422_12
: 3G SDI Level-A Mapping Structure 4 YCbCr 4:2:2/12 bit
▶B_MS1_YCbCr422_10
: 3G SDI Level-B Mapping Structure 1 YCbCr 4:2:2/10 bit
▶B_MS2_YCbCr444_10
: 3G SDI Level-B Mapping Structure 2 YCbCr 4:4:4/10 bit
▶B_MS2_RGB444_10
: 3G SDI Level-B Mapping Structure 2 RGB 4:4:4/10 bit
▶B_MS3_YCbCr444_12
: 3G SDI Level-B Mapping Structure 3 YCbCr 4:4:4/12 bit
▶B_MS3_RGB444_12
: 3G SDI Level-B Mapping Structure 3 RGB 4:4:4/12 bit
▶B_MS4_YCbCr422_12
: 3G SDI Level-B Mapping Structure 4 YCbCr 4:2:2/12 bit
▶B_2X_DS1_YCbCr422_10
: 3G SDI Level-B Data Stream 1 YCbCr 4:2:2/10 bit, Dual Link SMPTE-372M
▶B_2X_DS2_YCbCr422_10
: 3G SDI Level-B Data Stream 2 YCbCr 4:2:2/10 bit, Dual Link SMPTE-372M
7
Especially for G Level B signals, the format should be set manually.
Also, be aware that the format information might be lost on power down.
HDMI UV S ap
Sometimes UV signal might be opposite such input as PC RGB or such resolution as
PC’s. Turn this mode on to see correct color when the incorrect color displayed on this
kind of input.
SDI Output
Set how to use SDI Out port. Choose either SDI loop-through or HDMI-to-SDI conversion
out.
DSLR Camera
Set which DSLR camera you use for DSLR Zoom mode. DSLR Zoom mode can be set by
pressing Zoom button in the front.
8
DISPLAY 1
Aspect
Sets the aspect ratio of the screen. 6:9, 4:3, Native(Original) are selectable.
Anarmorphic
Set this mode to resize the screen to 3.56: , 2.74: , 2.59: , 2.55: , 2.40: , 2.39: , 2.35: ,
.85: , .75: , .66: , or .37: .
Waveform Display
Select waveform display mode. Choose Normal to analyze whole screen, choose Line
Select to analyze a specific line of the screen.
Waveform Line Select
Select the line when you select Line Select mode for Waveform display.
Waveform Select
Select which color signal to monitor among Y, Cb, or Cr.
Waveform Color Mode
Choose either Single or Mixed.
Waveform Intensity
Set waveform color’s intensity between 0~63.
WFM & Vector Size
Set Waveform and Vectorscope size among three kinds.
9
WFM & Vector Blend
Set transparency of Waveform and Vectorscope window between 0~6.
YCbCr
YCbCr is a digital color reproduction standard. Y is for luminance, Cb
is for blue strength, Cr is for red strength.
0
Altri manuali per FM-055F
1
Indice
Altri manuali bon Monitor
