Congratulaons for choosing the Booma RC Wallaby Switch.
Wallaby Switch was designed for giant scale RC enthusiasts by
giant scale RC enthusiasts. Wallaby Switch oers features never
seen before in Radio Control applicaons in a compact, light
weight and aordable package.
Before you install Wallaby Switch please take the me
to read these instrucons. A few simple steps will
have you successfully using this advanced product in
no me at all.
Wallaby Switch Features:
- Microprocessor control - of high powered digital switching circuit(s) .
- Fail Safe Switching - of both baeries.
- High Bright Blue LED - for easy daylight reading.
- Voltage Monitoring - of each baery. (BRCWAL1 and 2 version)
- Selectable Baery Type - for monitoring of LifeP04, LiPo and Lion bat-
tery chemistries.
- Low Voltage Alarm via LED indicaon.
- 2 x 10 Amp constant current capability (Ultra Connecor version).
- 2 x 20 Amp for 30 seconds (Ultra Connecor version).
- Micro-Power design less than 0.4mA in standby mode.
- Input Voltage 6v to 13v.
- Weight 17 grams.
- Dimensions 36mm x 17mm (1.41 x 0.66 inches).
DO’S and DON’TS
Wallaby Switch comes with 1 or 2 completely independent solid
state digital switches and is designed to be used with 1 or 2 bat-
teries of the same chemistry and capacity for receiver and servo
switching. A matched pair of baeries will give best performance.
2
