14 15
CLEANINGCLEANING
REMOVAL OF LIME DEPOSITS FROM THE
COFFEE MAKER
Due to regular usage hard water can cause
formation of mineral deposits on many internal
components, which will lead to delay in water
supply, reduction of power and worsening of coffee
quality. It is recommended to remove lime deposits
regularly (every 2-3 months) with special cleaning
agents.
We do not recommend to wash any parts of the
coffee maker or additional appliances in the
dishwasher.
• Make sure that the mode select switch is in
STAND BY position and the POWER button is in
OFF position, the coffee maker is switched off
and unplugged.
• Remove the filter holder and the frothing nozzle.
Mix the cleaning agent with water and pour in the
water container.
• Pug in and switch on the coffee maker.
• Set the POWER button into ON position and the
mode select switch in STAND BY position.
• Place a large container under the brewing unit
and the Cappuccinatore tube. When the coffee
brewing temperature is reached, red HEATING
indicator will be off.
• Set the mode select handle into right position
and wait until the mixture starts to flow out.
• Once a half of the cleaning agent and water
mixture flows out through the brewing unit, set
the mode select handle in STAND BY position.
• Set the mode select handle in STEAM position
and wait until the remaining mixture flows out
through the Cappuccinatore tube. Return the
mode select handle in STAND BY position.
• Carefully wash the container with water, add
water and repeat the previous steps.
Use only special cleaning agents to clean the coffee
maker from scale.
CLEANING OF THE FILTER HOLDER
Remove the filter by pressing EJECT button in the
bottom part of the filter holder. Wash the filter and
the holder with water and dry them.
CLEANING OF THE CAPPUCCINATORE
TUBE AND THE FROTHING NOZZLE
Clean the Cappuccinatore tube and the frothing
nozzle after each milk frothing.
• Remove the frothing nozzle and wash it with
warm running water.
• Wipe the Cappuccinatore tube with a wet napkin
and then direct it into the water tray upon turning
of the mode select switch into position STEAM.
This will remove the remaining milk inside the
filter holder.
If the Cappuccinatore tube is dirty wait until the
coffee maker cools down before using the cleaning
tool.
• If it did not help and the Cappuccinatore tube
is still dirty remove the tip with the key in the
middle of the accessory cleaning tool.
• Soak the tip in hot water and then clean it with
the needle of the accessory tool. Place the tip on
the tube and fix it.
To not take off the water container and do not
empty it entirely during removal of lime deposits.
