Bosch NBC-265-P Manuale utente
IP Camera 200 Series
NBC-265-P
en Installation and Operation Manual
IP Camera 200 Series Table of Contents | en 3
Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01
Table of Contents
1Safety 7
1.1 Safety precautions 7
1.2 Important safety instructions 8
1.3 FCC & ICES compliance 9
1.4 UL certification 10
1.5 Bosch notices 10
1.6 Copyrights 11
2 Introduction 13
2.1 Features 13
2.2 Unpacking 14
3 Installation 15
3.1 SD card 15
3.2 Mounting the camera 16
3.3 Network (and power) connector 18
3.4 Power connection 19
3.4.1 DC power connection 19
3.5 I/O connector 20
3.6 Audio connectors 21
3.7 Resetting the camera 22
4 Browser connection 23
4.1 System requirements 23
4.2 Establishing the connection 23
4.2.1 Password protection in camera 24
4.3 Protected network 24
4.4 Connection established 25
4.4.1 LIVEPAGE 25
4.4.2 RECORDINGS 25
4.4.3 SETTINGS 25
4en | Table of Contents IP Camera 200 Series
AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems
5 Basic Mode 27
5.1 Basic Mode menu tree 27
5.2 Device Access 28
5.2.1 Camera name 28
5.2.2 Password 28
5.3 Date/Time 29
5.4 Network 30
5.5 Encoder 31
5.6 Audio 31
5.7 Recording 31
5.7.1 Storage medium 31
5.8 System Overview 31
6 Advanced Mode 33
6.1 Advanced Mode menu tree 33
6.2 General 34
6.2.1 Identification 34
6.2.2 Password 34
6.2.3 Date/Time 36
6.2.4 Display Stamping 37
6.3 Web Interface 39
6.3.1 Appearance 39
6.3.2 LIVEPAGE Functions 40
6.3.3 Logging 41
6.4 Camera 42
6.4.1 Picture Settings 42
6.4.2 Encoder Profile 44
6.4.3 Encoder Streams 48
6.4.4 Audio 49
6.4.5 Installer Menu 50
6.5 Recording 51
6.5.1 Storage Management 52
6.5.2 Recording Profiles 55
6.5.3 Retention Time 57
6.5.4 Recording Scheduler 58
6.5.5 Recording Status 59
IP Camera 200 Series Table of Contents | en 5
Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01
6.6 Alarm 60
6.6.1 Alarm Connections 60
6.6.2 Video Content Analyses (VCA) 63
6.6.3 VCA configuration- Profiles 64
6.6.4 VCA configuration - Scheduled 70
6.6.5 VCA configuration - Event triggered 72
6.6.6 Audio Alarm 73
6.6.7 Alarm E-Mail 74
6.7 Interfaces 76
6.7.1 Alarm input 76
6.7.2 Relay 76
6.8 Network 78
6.8.1 Network Access 78
6.8.2 Advanced 82
6.8.3 Multicast 83
6.8.4 FTP Posting 85
6.9 Service 86
6.9.1 Maintenance 86
6.9.2 System Overview 88
7 Operation via the browser 89
7.1 Livepage 89
7.1.1 Processor load 89
7.1.2 Image selection 90
7.1.3 Digital I/O 91
7.1.4 System Log / Event Log 91
7.1.5 Saving snapshots 92
7.1.6 Recording video sequences 92
7.1.7 Running recording program 92
7.1.8 Audio communication 92
7.2 Recordings page 94
7.2.1 Controlling playback 94
8 Troubleshooting 97
8.1 LED indicators 97
8.2 Resolving problems 97
6en | Table of Contents IP Camera 200 Series
AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems
8.3 Customer service 97
9 Maintenance 99
9.1 Repairs 99
9.1.1 Transfer and disposal 99
10 Technical Data 101
10.1 Specifications 101
10.1.1 Dimensions 103
10.1.2 Accessories 103
IP Camera 200 Series Safety | en 7
Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01
1Safety
1.1 Safety precautions
DANGER!
High risk: This symbol indicates an imminently hazardous
situation such as "Dangerous Voltage" inside the product.
If not avoided, this will result in an electrical shock, serious
bodily injury, or death.
WARNING!
Medium risk: Indicates a potentially hazardous situation.
If not avoided, this could result in minor or moderate bodily
injury.
CAUTION!
Low risk: Indicates a potentially hazardous situation.
If not avoided, this could result in property damage or risk of
damage to the device.
8en | Safety IP Camera 200 Series
AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems
1.2 Important safety instructions
Read, follow, and retain for future reference all of the following
safety instructions. Heed all warnings on the unit and in the
operating instructions before operating the unit.
1. Cleaning - Generally, using a dry cloth for cleaning is
sufficient but a moist, fluff-free cloth or leather shammy
may also be used. Do not use liquid cleaners or aerosol
cleaners.
2. Heat Sources - Do not install the unit near any heat
sources such as radiators, heaters, stoves, or other
equipment (including amplifiers) that produce heat.
3. Water - Never spill liquid of any kind on the unit.
4. Lightning - Take precautions to protect the unit from
power and lightning surges.
5. Controls adjustment - Adjust only those controls specified
in the operating instructions. Improper adjustment of
other controls may cause damage to the unit.
6. Power sources - Operate the unit only from the type of
power source indicated on the label.
7. Servicing - Unless qualified, do not attempt to service this
unit yourself. Refer all servicing to qualified service
personnel.
8. Replacement parts - Use only replacement parts specified
by the manufacturer.
9. Installation - Install in accordance with the manufacturer's
instructions and in accordance with applicable local codes.
10. Attachments, changes or modifications - Only use
attachments/accessories specified by the manufacturer.
Any change or modification of the equipment, not
expressly approved by Bosch, could void the warranty or,
in the case of an authorization agreement, authority to
operate the equipment.
IP Camera 200 Series Safety | en 9
Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01
1.3 FCC & ICES compliance
FCC & ICES Information
(U.S.A. and Canadian Models Only)
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
– reorient or relocate the receiving antenna;
– increase the separation between the equipment and
receiver;
– connect the equipment into an outlet on a circuit different
from that to which the receiver is connected;
– consult the dealer or an experienced radio/TV technician
for help.
Intentional or unintentional modifications, not expressly
approved by the party responsible for compliance, shall not be
made. Any such modifications could void the user's authority to
operate the equipment. If necessary, the user should consult
the dealer or an experienced radio/television technician for
corrective action.
The user may find the following booklet, prepared by the
Federal Communications Commission, helpful: How to Identify
and Resolve Radio-TV Interference Problems. This booklet is
available from the U.S. Government Printing Office,
Washington, DC 20402, Stock No. 004-000-00345-4.
10 en | Safety IP Camera 200 Series
AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems
1.4 UL certification
Disclaimer
Underwriter Laboratories Inc. ("UL") has not tested the
performance or reliability of the security or signaling aspects of
this product. UL has only tested fire, shock and/or casualty
hazards as outlined in UL's Standard(s) for Safety for Closed
Circuit Television Equipment, UL 2044. UL Certification does not
cover the performance or reliability of the security or signaling
aspects of this product.
UL MAKES NO REPRESENTATIONS, WARRANTIES, OR
CERTIFICATIONS WHATSOEVER REGARDING THE
PERFORMANCE OR RELIABILITY OF ANY SECURITY OR
SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.
1.5 Bosch notices
More information
For more information please contact the nearest Bosch Security
Systems location or visit www.boschsecurity.com
Disposal - Your Bosch product was developed and
manufactured with high-quality material and components that
can be recycled and reused. This symbol means that
electronic and electrical appliances, which have reached the
end of their working life, must be collected and disposed of
separately from household waste material. Separate collecting
systems are usually in place for disused electronic and
electrical products. Please dispose of these devices at an
environmentally compatible recycling facility, per European
Directive 2002/96/EC
Altri manuali per NBC-265-P
1
Indice
Altri manuali Bosch Telecamera IP
Bosch
Bosch FLEXIDOME IP starlight 7000 RD Guida all'installazione
Bosch
Bosch NBC-255-P Manuale utente
Bosch
Bosch NDN-498 Manuale utente
Bosch
Bosch MIC-71 series Manuale utente
Bosch
Bosch NDC-265-P Manuale utente
Bosch
Bosch LTC 9450 Series Unity Dome Manuale utente
Bosch
Bosch NBC-255-P Istruzioni per l’uso
Bosch
Bosch TC9376H Manuale utente
Bosch
Bosch LTC 7960 Series Manuale utente
Bosch
Bosch FLEXIDOME IP panoramic 6000 IC Manuale utente
Bosch
Bosch NDC-455 Manuale utente
Bosch
Bosch MIC IP fusion 9000i Manuale utente
Bosch
Bosch Onvif NTC-255-PI Manuale utente
Bosch
Bosch Infrared Imager EX80 Manuale utente
Bosch
Bosch NBC-225-P Manuale utente
Bosch
Bosch 200 Series Manuale utente
Bosch
Bosch NWD-455 FlexiDome Manuale utente
Bosch
Bosch AN traffic 4000 IR Manuale utente
Bosch
Bosch AVIOTEC IPSTARLIGHT 8000 Manuale utente
Bosch
Bosch NBC-255-W Istruzioni per l’uso
