Bosch NBC-265-W Manuale utente
HD 720p IP Wireless Camera
NBC-265-W
en Installation and Operation Manual
IP Camera 200 Series Table of Contents | en 3
Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.54 | 2011.08
Table of Contents
1Safety 8
1.1 Safety precautions 8
1.2 Important safety instructions 9
1.3 FCC & ICES compliance 10
1.4 UL certification 11
1.5 CE certification 12
1.6 Bosch notices 12
1.7 Copyrights 13
2 Introduction 14
2.1 Features 14
2.2 Unpacking 16
3 Installation 18
3.1 Wireless antenna 18
3.2 SD card 19
3.3 Mounting the camera 22
3.5 Network connector 26
3.6 Power connection 27
3.6.1 DC power connection 27
3.7 I/O connector 29
3.8 Audio connectors 31
3.9 Resetting the camera 32
4 Browser connection 59
4.1 System requirements 59
4.2 Establishing the connection 60
4.2.1 Password protection in camera 60
4.3 Protected network 60
4.4 Connection established 61
4.4.1 Livepage 62
4.4.2 Recordings 63
4.4.3 Settings 63
4en | Table of Contents IP Camera 200 Series
AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual Bosch Security Systems
5 Basic Mode 64
5.1 Basic Mode menu tree 64
5.2 Device Access 65
5.2.1 Camera name 65
5.2.2 Password 65
5.3 Date/Time 66
5.4 Network 67
5.5 Encoder 68
5.6 Audio 68
5.7 Recording 68
5.7.1 Storage medium 68
5.8 System Overview 68
6 Advanced Mode 69
6.1 Advanced Mode menu tree 69
6.2 General 70
6.2.1 Identification 70
6.2.2 Password 70
6.2.3 Date/Time 72
6.2.4 Display Stamping 73
6.3 Web Interface 75
6.3.1 Appearance 75
6.3.2 LIVEPAGE Functions 76
6.3.3 Logging 77
6.4 Camera 78
6.4.1 Installer Menu 78
6.4.2 Picture Settings 79
6.4.5 Encoder Streams 89
6.4.6 Audio 90
6.5 Recording 91
6.5.1 Storage Management 92
6.5.2 Recording Profiles 96
6.5.3 Retention Time 98
6.5.4 Recording Scheduler 99
6.5.5 Recording Status 100
6.6 Alarm 101
IP Camera 200 Series Table of Contents | en 5
Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.54 | 2011.08
6.6.1 Alarm Connections 101
6.6.2 Video Content Analyses (VCA) 104
6.6.3 VCA configuration- Profiles 105
6.6.4 VCA configuration - Scheduled 111
6.6.5 VCA configuration - Event triggered 113
6.6.6 Audio Alarm 114
6.6.7 Alarm E-Mail 115
6.7 Interfaces 118
6.7.1 Alarm input 118
6.7.2 Relay 118
6.8 Network 120
6.8.1 Network Access 120
6.8.2 Advanced 124
6.8.3 WLAN 125
6.8.4 Multicast 126
6.8.5 FTP Posting 127
6.9 Service 129
6.9.1 Maintenance 129
6.9.2 System Overview 131
7 Operation via the browser 132
7.1 Livepage 132
7.1.1 Processor load 133
7.1.2 Image selection 134
7.1.3 Digital I/O 135
7.1.4 System Log / Event Log 136
7.1.5 Saving snapshots 136
7.1.6 Recording video sequences 136
7.1.7 Running recording program 136
7.1.8 Audio communication 137
7.2 Recordings page 138
7.2.1 Controlling playback 138
8 Troubleshooting 140
8.1 LED indicators 140
8.2 Resolving problems 140
6en | Table of Contents IP Camera 200 Series
AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual Bosch Security Systems
8.3 Customer service 141
9 Maintenance 142
9.1 Repairs 142
9.1.1 Transfer and disposal 142
10 Technical Data 143
10.1 Specifications 143
10.1.1 Dimensions 157
10.1.2 Accessories 160
8en | Safety IP Camera 200 Series
AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual Bosch Security Systems
1Safety
1.1 Safety precautions
DANGER!
High risk: This symbol indicates an imminently hazardous
situation such as "Dangerous Voltage" inside the product.
If not avoided, this will result in an electrical shock, serious
bodily injury, or death.
WARNING!
Medium risk: Indicates a potentially hazardous situation.
If not avoided, this could result in minor or moderate bodily
injury.
CAUTION!
Low risk: Indicates a potentially hazardous situation.
If not avoided, this could result in property damage or risk of
damage to the device.
IP Camera 200 Series Safety | en 9
Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.54 | 2011.08
1.2 Important safety instructions
Read, follow, and retain for future reference all of the following
safety instructions. Heed all warnings on the unit and in the
operating instructions before operating the unit.
1. Cleaning - Generally, using a dry cloth for cleaning is
sufficient but a moist, fluff-free cloth or leather shammy
may also be used. Do not use liquid cleaners or aerosol
cleaners.
2. Heat Sources - Do not install the unit near any heat
sources such as radiators, heaters, stoves, or other
equipment (including amplifiers) that produce heat.
3. Water - Never spill liquid of any kind on the unit.
4. Lightning - Take precautions to protect the unit from
power and lightning surges.
5. Controls adjustment - Adjust only those controls specified
in the operating instructions. Improper adjustment of
other controls may cause damage to the unit.
6. Power sources - Operate the unit only from the type of
power source indicated on the label.
7. Servicing - Unless qualified, do not attempt to service this
unit yourself. Refer all servicing to qualified service
personnel.
8. Replacement parts - Use only replacement parts specified
by the manufacturer.
9. Installation - Install in accordance with the manufacturer's
instructions and in accordance with applicable local codes.
10. Attachments, changes or modifications - Only use
attachments/accessories specified by the manufacturer.
Any change or modification of the equipment, not
expressly approved by Bosch, could void the warranty or,
in the case of an authorization agreement, authority to
operate the equipment.
10 en | Safety IP Camera 200 Series
AR18-10-B012 | v1.54 | 2011.08 Installation and Operation Manual Bosch Security Systems
1.3 FCC & ICES compliance
FCC & ICES Information
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
– reorient or relocate the receiving antenna;
– increase the separation between the equipment and
receiver;
– connect the equipment into an outlet on a circuit different
from that to which the receiver is connected;
– consult the dealer or an experienced radio/TV technician
for help.
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions:
1. this device may not cause harmful interference, and
2. this device must accept any interference received,
including interference that may cause undesired operation.
Intentional or unintentional modifications, not expressly
approved by the party responsible for compliance, shall not be
made. Any such modifications could void the user's authority to
operate the equipment. If necessary, the user should consult
the dealer or an experienced radio/television technician for
corrective action.
IP Camera 200 Series Safety | en 11
Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.54 | 2011.08
The user may find the following booklet, prepared by the
Federal Communications Commission, helpful: How to Identify
and Resolve Radio-TV Interference Problems. This booklet is
available from the U.S. Government Printing Office,
Washington, DC 20402, Stock No. 004-000-00345-4.
FCC RF Radiation Exposure Statement
The equipment complies with RF exposure limits set forth for
an uncontrolled environment. The antenna(s) used for this
transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
1.4 UL certification
Disclaimer
Underwriter Laboratories Inc. ("UL") has not tested the
performance or reliability of the security or signaling aspects of
this product. UL has only tested fire, shock and/or casualty
hazards as outlined in UL's Standard(s) for Safety for Closed
Circuit Television Equipment, UL 2044. UL Certification does not
cover the performance or reliability of the security or signaling
aspects of this product.
UL MAKES NO REPRESENTATIONS, WARRANTIES, OR
CERTIFICATIONS WHATSOEVER REGARDING THE
PERFORMANCE OR RELIABILITY OF ANY SECURITY OR
SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Bosch Telecamera IP
Bosch
Bosch TC9376H Manuale utente
Bosch
Bosch DinionHD NBN-921 Manuale utente
Bosch
Bosch MIC IP ultra 7100i Manuale utente
Bosch
Bosch NBC-255-P Manuale utente
Bosch
Bosch Onvif NTC-255-PI Manuale utente
Bosch
Bosch DinionHD NBN-832 Manuale utente
Bosch
Bosch NDN-50022-A3 Manuale utente
Bosch
Bosch NBC-225-P Manuale utente
Bosch
Bosch NBC-255-P Manuale utente
Bosch
Bosch NEC-070V09-21W Manuale utente
Bosch
Bosch A1 Security Cameras IR Illuminator 5000... Manuale di installazione e funzionamento
Bosch
Bosch NEC-070V09-21W Manuale utente
Bosch
Bosch 200 Series Manuale utente
Bosch
Bosch NBC-265-P Manuale utente
Bosch
Bosch AUTODOME 7100i Manuale utente
Bosch
Bosch FLEXIDOME IP starlight 7000 RD Guida all'installazione
Bosch
Bosch NDC-455 Manuale utente
Bosch
Bosch FLEXIDOME multi 7000i Manuale utente
Bosch
Bosch NDC-455 Manuale utente
Bosch
Bosch NDC-225-PI Manuale utente
