Bosch Rexroth VCH 08.1 Manuale utente

Bosch Rexroth AG

Electric Drives and Controls

Bgm.-Dr.-Nebel-Str. 2

97816 Lohr am Main, Germany

Phone +49 (0)9352-40-50 60

Fax +49 (0)9352-40-48 85

www.boschrexroth.com

Rexroth IndraControl VCH 08.1

with Emergency STOP Button (customer-specific)

Hand-Held Terminal

Assembly Instruction

About this Document

The assembly instruction describes how to install the customer-specific VCH

08.1 with EMERGENCY STOP button.

For further information, please refer to the project planning manual

“Rexroth IndraControl VCH 08.1”, parts number R911320190.

Symbols

This document uses the following symbols to draw the reader’s attention to

notices and dangers:

Target Group

All installation work related to the automation system may only be carried

out by qualified personnel (e.g. electricity specialists, electrical engineers).

The personnel installing the device must be qualified to work with the auto-

mation system.

Safety Component according to Machinery Directive

This device is a safety component or part of the safety circuit! Please read

and comply with the safety instructions specified in the respective manual

before installing and setting the device up.

Comply with the regulations of the Machinery Directive 2006/42/EC. Syn-

chronize the safety components to the EN ISO 13849-1, EN ISO 13850 stan-

dards. A risk analysis according to EN ISO 14121-1 determines the safety

category (see EN 60204-1). Check whether further standards have to be

complied with.

The assembly instructions apply for the following device variant:

Device type Description Parts number

VCH08.1EKB-064ET-A1D-064-ES-E3-PW VCH08.1 customer-specific R911171385

2/4 R911333523-AA_BPZ_DOC

20. Januar 2011

Unpacking

Unpack all items and check the contents for visible damages in transit. Also

check, whether the delivery corresponds to the data on the delivery note.

Please contact the Bosch Rexroth sales department immediately in case of

discrepancies or damages in transit.

Connecting

Use only fitting cable terminals to wire the hand-held terminal. The wire ca-

ble cores should have a minimum cross-section of 0.34 mm2.

The IndraControl VCH 08.1 hand-held terminal is connected to the automa-

tion system via connection terminals. The operator has to ensure that the

system, in particular the safety devices, are in a good order and condition

before commissioning the IndraControl VCH 08.1. The system and the safety

devices are to be checked in regular intervals during the operation.

Before commissioning IndraControl VCH 08.1, please ensure that

the Emergency STOP Button is NOT pressed.

Connecting IndraControl VCH 08.1 during a pressed Emergency

STOP button will shut the installation down.

3/4 R911333523-AA_BPZ_DOC

20. Januar 2011

4/4 R911333523-AA_BPZ_DOC

20. Januar 2011

Terminal assignment of the cable and Connection parame-

ters

Terminal assignment of the cable Connection parameters

Color Signal name Parameters Value

green 24 VDC Rated voltage UNDC 24 V ; (+19 V to +30 V)

grey 0 V Residual ripple UNSee device documentation

black Ground Noise and surge immunity Umax= 35 V (for t < 100 ms)

white-

green

Emergency STOP button 1 IN Current consumption for UNMax. 0.7 A (depending on

the operator terminal)

grey-pink Emergency STOP button 1 OUT External fuse protection Fuse, 2 A slow

violet Emergency STOP button 2 IN

red-blue Emergency STOP button 2 OUT

Reverse voltage protection Via isolating diode; in case

of polarity reversal, the in-

put fuse is triggered

RJ45 con-

nector

EtherNet

Altri manuali per Rexroth VCH 08.1

Altri manuali Bosch Terminale touch

Bosch

Bosch Rexroth IndraControl VEP .2 Series Manuale tecnico

Bosch

Bosch Rexroth IndraControl VEH 30.1 Manuale tecnico

Bosch

Bosch Rexroth VCH 08.1 Manuale utente

Bosch

Bosch Rexroth IndraControl VCP 35.2 Manuale tecnico

Bosch

Bosch Rexroth ctrlX I/O XI312204 Manuale utente

Bosch

Bosch Rexroth Indramat BTV30.2 Manuale tecnico

Bosch

Bosch Rexroth IndraControl VAK 41.2 Manuale utente

Bosch

Bosch Rexroth IndraControl VPP 21.1 Series Manuale tecnico

Bosch

Bosch Rexroth IndraControl VCP 08.2 Manuale tecnico

Bosch

Bosch Rexroth IndraControl VPP 21.2 Manuale tecnico

Bosch

Bosch Rexroth IndraControl VEP 4 Series Manuale utente

Bosch

Bosch Rextop IndraControl VCH 05.1 Manuale utente

Bosch

Bosch Rexroth VCH 08.1 Manuale utente

Bosch

Bosch rexroth IndraControl VAC 08.1 Manuale utente

Bosch

Bosch REXROTH IndraLogic VEP 5 Series Manuale utente

Bosch

Bosch Rexroth IndraControl VDP 16.1 Manuale tecnico

Bosch

Bosch rexroth IndraControl VEP 30.6 Manuale utente

Bosch

Bosch Rexroth IndraControl VCP 11.2 Manuale tecnico

Bosch

Bosch Rexroth VCH 08.1 Manuale utente

Bosch

Bosch Rexroth IndraControl VEH 30.1 Manuale tecnico

Manuali Terminale touch popolari di altre marche

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Manuale utente

Ingenico

Ingenico AXIUM EX4000 Manuale utente

Heisei Electronics

Heisei Electronics Q-POS 815 Manuale utente

Amano

Amano MTX-15 Manuale utente

FLOWBIRD

FLOWBIRD CWT Compact Touch Manuale utente

Demco

Demco SP7 Manuale utente

Lathem

Lathem PC600 Series Manuale utente

Partner

Partner MF-2352 Manuale utente

NCR

NCR RealPOS 7460-2 Manuale

Simrad

Simrad MS50 Istruzioni per il montaggio

Unitech

Unitech MR350 MKII Guida rapida

Jungheinrich

Jungheinrich WMT 210 Manuale utente

Motorola

Motorola MTP850 Manuale utente

YASKAWA

YASKAWA 62H-MDC0 Manuale utente

MVG industries

MVG industries NeptuLink Manuale utente

Price Industries Limited

Price Industries Limited FDC Manuale di istruzioni

Honeywell

Honeywell TemaKey Manuale utente

EBN

EBN BPC65-B-A16G Manuale utente