Bosscom Wireless HDMI Manuale utente
Wireless HDMI User Manual
2
Table of Content
1. Important Information..................................... 3
1.1 Safety Precautions .................................... 4
1.2 Declaration of Conformity.......................... 5
1.3 Trademark Information .............................. 6
1.4 Special Notice: .......................................... 7
1.5 Cleaning.................................................... 8
2. Product Introduction .................................... 8
2.1 Product specifications ............................... 8
2.1 Product Features....................................... 9
2.2 Packing Content...................................... 10
2.4 Functions .................................................11
2.4.1 Wireless HDMI transmitter functions...11
2.4.2 HDMI Receiver Functions.................. 12
2.4.3 Indicating LED ................................... 14
2.5 Transmitter Connection ........................... 14
3. Receiver Connections.................................. 17
4. Troubleshooting ........................................... 18
5 FCC ID Warning ........................................... 21
6 IC ID Warning ............................................... 22
3
1. Important Information
Before you use the BOSSCOM Wireless HDMI
transmitter and receiver, it is important that you read
this user manual to get important information and
instructions regarding wireless HD transmitter and
receiver.
Any defects in components or faulty workmanship
occurring within a specific period will be rectified or
repaired free of charge, but this warranty may not
apply to the following cases:
-Unauthorized modifications to the products or
repair by an unauthorized technician.
-Breakage caused by accidents including but not
limited to fire, water immersion, and moisture.
-Use on incorrect voltage, use contrary to operating
instructions.
-Product model number got altered, removed or
made illegible.
4
1.1 Safety Precautions
Danger:Electricity Hazard
-Power must be switched off when not in use, any
power adaptors connected AV devices and TV
should be plugged out.
-Power outlet: To prevent electricity shock, please
check if the mains lead used on the receiver and
transmitter corresponds to the power outlet.
-Mains lead: stepping or putting heavy stuffs on
mains lead is prohibited.
-Power overloading: Do not overload the power
5
-outlets or extend the length of power line, otherwise
electric shock or fire could happen.
-Lighting stroke: disconnect the power adaptor
when product is not used for a long time or in
lighting stroke weather.
-Switch off the power when product is not in use to
prevent electric shock or fire.
Warning:
-Keep the product away from objects with liquids
and splashing or dripping on this product is strictly
prohibited.
-Put the product in a well-ventilated space and keep
it away from direct sunlight or any source of heat.
-Do not expose the product to rain or moisture,
otherwise electric shock or fire could happen.
1.2 Declaration of Conformity
Provisions.
Part 15: Subpart E---Unlicensed National Information
Infrastructure Devices.
Part 1: General Requirements
EN 300440-01(V1.6.1)
This product complies with Part 15C and Part 15E of
FCC Rules.
Part 15: Subpart C—Radiated Emission Limits,
Additional
This device complies with relative criteria CE
Certification.
EN 60950-1:2006
Information Technology
Equipment ---Safety---
6
Electromagnetic Compatibility and Radio Spectrum
Matters (ERM)
Short Range Devices.
Radio equipment to be used in the 1GHz TO 40 GHz
frequency range.
Part 1: Technical Characteristics and Test Methods
EN 301489-03(V1.4.1)
Electromagnetic Compatibility and Radio Spectrum
Matters(ERM);
Part 3:Specific conditions for Short-Range Device(SRD)
Operating on frequency between 9 kHz and 40 GHz
EN 301489-17(V2.1.1)
Electromagnetic Compatibility and Radio Spectrum
Matters (ERM);
Part 17: Specific conditions for Broadband Data
Transmission Systems
EN 301893(V1.5.1)
Broadband Radio Access Network (BRAN)
5 GHz high performance RLAN
Harmonized EN covering the essential requirements of
article 3.2 of the R&TTE Directive
1.3 Trademark Information
HDMI, HDMI Logo and High Definition Multimedia
Interface are registered trademarks of HDMI Licensing
LLC in America and other countries.
7
1.4 Special Notice:
Do not use this product nearby an aircraft or medical
facility to prevent interference. Please handle this device
carefully otherwise wireless wave may cause the
abnormal video and audio (noise, blocked image…etc,)
1) Put it on the desk steadily; do not try to move it when
connected.
2) Keep it away from refrigerator or other metal furniture.
3) Do not place it in narrow place.
Do not place this product in a dusty, humid environment,
and in the place where the temperature is out of the
stated operational temperature range.
This product is with DC power supply. Please make sure
that the replacing power adapter with identification of
5V/3A to avoid irreparable fault.
Do not cover it or place other heavy objects on top of the
unit, which may block thermos vent. Good air circulation
around the product is required.
For energy saving, please turn off the power switch or
unplug the power adapter when the units are not in use.
If the product does not work properly, please restart it. If
the problem maintains, cut off the power and send it to
professional technicians for repair or disposal. Please do
not open or repair it yourself.
8
This product has been manufactured and tested to
comply with each country’s safety regulations. However, it
doesn’t guarantee that interference would never happen
in some specific environment. If interference does occur,
please take away the interfering objects from transmitter
and receiver.
The optimal working distance between transmitter and
receiver is 1 meter to 30 meters.
1.5 Cleaning
Unplug power adaptor before performing any cleaning. To
clean the device, wipe with a soft, dry cloth or with a cloth
moistened with alcohol.
-Do not demount the device when connected to power
outlet, otherwise, electricity shock may happen.
-An authorized technician should conduct
maintenance.
-Dripping or splashing on the device is strictly
prohibited.
-Keep the device away from fire or any source of heat.
-Do not let kids play with this device.
2. Product Introduction
2.1 Product specifications
Supported
Resolution
1080p, 1080i, 720p
HDMI Interface
Support HDMI1.4A video/audio format
and encrypted video format HDCP 2.0
9
Transmission
Distance
30m line of sight
System
Latency
<1 ms
Antenna
Omni bearing built-in antenna
Power
100~ 240V alternating input current,
5V/3A DC output power adaptor
Certificates
FCC, CE
Standard
WHDI 1.0
Supported
interface
3.5mm plug，external
infrared remote control
connector
Built in
infrared
remote
receiving
module
Working
temperature
0˚C- 5˚C
Dimension
146(L)*93(W)*25(H)mm
2.2 Product Features
-Working frequency: 2.4GHz, 5.8 GHz
-Compatible design
-Built-in Omni antenna
-With a transmission distance of 30m with zero latency
10
2.3 Packing Content
Please check whether the following contents are present
in the package box. If any item is missing or damaged,
please contact the dealer.
Main parts
BOSSCOM Wireless HDMI transmitter and receiver
Supplied Accessories:
One USB lead, 2 holding base, one infrared transmitting
connector, one user manual, 2 power adaptors, one
remote control.
Indice
Altri manuali Bosscom Ricevitore
