Boya BY-PM700 Manuale utente

USB & XLR麦克风

使用说明

Instruction Manual

BY-PM700 Pro

USB & XLR

Microphone

Introduction

Package Contents

Thanks for choosing BOYA!

• BY-PM700 Pro Microphone

• USB-A to USB-C Cable (3m)

• USB-C to USB-C Cable (2m)

• 5-Pin XLR Female to Dual 3-Pin XLR Male Y-Cable (0.5m)

The BOYA BY-PM700 Pro is a desktop microphone with USB digital output and XLR analog

output, compatible with Android devices, Windows/Mac computers, and analog audio

devices. It provides a perfect audio solution for home studio recording, podcasting, voice

over, video conference, and more.

The microphone features pattern selection, allowing you to select Stereo, Omnidirectional,

Cardioid or Bidirectional pattern for dierent recording scenarios.

The 3.5mm headphone jack allows you to monitor and ensure the audio intelligibility during

recording. With built in controls for headphone volume, gain and muting, you are in total

control of your sound. An adjustable desktop stand allows you to place the microphone at

the angle that’s right for you.

1. Do not use the unit under water, don’t expose it to rain. Please store it in a cool, dry place.

2. Please use and store it in normal temperature. Do not move it from overheated to

super-cooled condition frequently as well as keep away from heat sources such as heater,

oven, or other devices that produce heat.

3. When using and storing, please pay attention to dust and moisture.

4. Be careful to violent collision.

Cautions

Product Structure

Front

Rear

Bottom

1. Tri-Capsule Array

2. Power Indicator

3. Mute Button

- Press to mute/unmute the microphone.

- When LED indicator is red, the microphone is muted.

4. Headphone Volume Control

5. Locking Knobs

6. Desk Stand

7. Gain Control

8. Pattern Selection

Stereo Pattern

Use the left and right channels to pick up sound, ideal for capturing

a realistic sound image.

Omnidirectional Pattern

Pick up sound equally from all directions, capturing a natural blend of voice

and ambiance with low sensitivity to wind and handling noise, as well as to

vocal plosives.

Cardioid Pattern

Maximizes the rejection of sound coming from the sides and rear of the

mic and can be used as a directional microphone to capture full, rich, and

natural-sounding audio for podcast, speech, dialog, instrument etc.

Bi-directional Pattern

Pick up sound at the front and rear of the microphone, while sides sounds

are not picked. It ts for capturing instruments, or recording an interview

between two people.

Functions

Angle Adjustment

Loosen the knobs of both sides anticlockwise.

Adjust the microphone at your desired angle, then tighten the knobs.

9. USB-C Port

10. 5-Pin XLR Connector

11. 5/8’’ Threaded Hole

12. 3.5mm Headphone Output

13. USB-C to USB-C Cable

14. USB-A to USB-C Cable

15. 5-Pin XLR Female to Dual

3-Pin XLR Male Y-Cable

Mounting the BY-PM700 Pro to a boom arm

1. Unscrew the locking knobs to remove the microphone from the desk stand.

2. Mount the microphone to the boom arm through its 5/8'' threaded hole.

Note:

the boom arm is not included.

How to Use

Using the USB digital output

1. Connect the microphone to your smartphone/computer

USB-C

devices

Mac/Windows

Computer

Using the supplied

USB-C to USB-C cable

Using the supplied

USB-A to USB-C cable

2. Connect headphones for audio monitoring.

3. Select the desired polar pattern and adjust the gain control and volume

control knobs according to your needs.

4. You are ready to record.

Setup for Windows 10

1. Connect the microphone to your

computer using the supplied cable.

2. Go to “Setting”, choose “Sound”.

3. Select “Speaker BY-PM700 Pro” as

the output device.

4. Select “Microphone BY-PM700 Pro”

as the input device.

Sound

Choose your output device

Choose your input device

Device properties

Volume

Test your microphone

Input

Some apps are using custom output settings. You can personalize

these in app volume and device preferences below.

Some apps are using custom input settings. You can personalize

these in app volume and device preferences below.

Speaker (BY-PM700 Pro)

Microphone (BY-PM700 Pro)

Troubleshoot

Setup for Windows 7

1. Connect the microphone to your computer using the supplied cable.

2. Go to “Control Panel”-->“Hardware and Sound”--> “Sound”.

3. Select “Speaker BY-PM700 Pro” as the default device in “Sound”, under

the “Playback” menu.

4. Select “Microphone BY-PM700 Pro” as the default device in “Sound”, under

the “Recording” menu.

Sound

Playback

Speaker

BY-PM700 Pro

Default Device

Recording Sounds Communications

Select a playback device below to modify its settings:

Congure Properties

OK Cancel Apply

Set Default

Sound

Playback

Microphone

BY-PM700 Pro

Default Device

Recording Sounds Communications

Select a playback device below to modify its settings:

Congure Properties

OK Cancel Apply

Set Default

Altri manuali per BY-PM700

Indice

Manuali Microfono popolari di altre marche

IK Multimedia

IK Multimedia iRig Stream MIC PRO Manuale utente

DAPAudio

DAPAudio RM-101 Manuale utente

AKG

AKG CHM 21 Manuale utente

Sennheiser

Sennheiser evolution wireless series EM 100 Manuale utente

Sony

Sony C-48 Manuale utente

GIGAMEDIA

GIGAMEDIA GGM PAMICUHFG Manuale utente

Shure

Shure WH30TQG Manuale utente

auna PRO

auna PRO MIC-900 Manuale utente

AKG

AKG D 3800 Manuale utente

Shure

Shure KSM141 Manuale utente

MAIIN SOUND

MAIIN SOUND IIN style Manuale utente

Earthworks

Earthworks TC25 Manuale utente

Sennheiser

Sennheiser evolution D1 Manuale utente

Alesis

Alesis MicLink Wireless Manuale utente

DSPPA

DSPPA D6234 Manuale utente

Monacor

Monacor IMG STAGELINE ECM-300B Manuale utente

Ansr Audio

Ansr Audio Scan16 Manuale utente

Shure

Shure MXA710 Series Manuale utente