Model
Weight
Video output
Waterproof standard
Storage temperature
Operate Temperature
375g±15%
176.8mm(L)*76.2mm(W)*84.7mm(H)
BLSBFP25/1.0AHD
Low/ Middle / High
-10 ~50 RH90% MAX℃ ℃
Sensor
Video format
Sync code
S/N Ration
Mini-illumination
AGC
White Balance
OSD
Voltage
Current
Lens
Size
Day/Night
Shutter Speed
NR
Backlight
IR range
Effective Pixels
Max.transmission distance
Video Frame Rate
DAY/NIGHT
720P Sensor
PAL/NTSC
ON/OFF
Internal
Support
DC12V
More than 50dB(with AGC OFF)
0Lux (IR ON)
3.6mm HD Lens
CVBS/AHD/TVI/CVI
Ip66
2DNR/3DNR
1280(H)x800(V)
500M
ATW/AWB
-20℃~70℃
25/30fps@720P
230mA±15%(IR ON);70mA±15%(IR OFF)
Support ICR
HD 720P Waterproof IR
User Manual
Camera
DESCRIPTION
ATTENTION
SPECIFICATION
DIMENSION(MM)
FEATURES
PARTS INSTRUCTION AND INSTALLATION
*Specifications subject to change without notice. EN-M01-830T-20150618
Thank you for your purchasing this product. Before attempting to connect or
operate this product, please read these instructions carefully and save this manual
for future use.
CAUTION
RISK OF E LE CTRIC
SHOCK D O NO T OPE N
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER
(OR BACK).
NO USER-SERVI CE ABLE PARTS INSIDE. REFER
SERVIC IN G TO QUALIFIED SERVICE PERSONNEL
1.
is DC12V.
2.
3.
4
5.
6.
7.
Use the Appropriate Power Supply
The input power for the camera Be sure to connect it to the appropriate
power. Wrong connection may cause malfunction and/or damage to the video camera.
Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or covers. There are no user
serviceable parts inside. Ask a qualified service person for servicing.
Handle the camera with care.
Do not abuse the camera. Avoid striking, shaking, etc. The camera could be
damaged by improper handling or storage.
. Do note use strong or abrasive detergents when cleaning the camera body.
Use a dry cloth to clean the camera when dirty. In case the dirt is hard to remove.
Use a mild detergent and wipe gently.
Clean the sensor faceplate with care.
When cleaning the sensor panel, do not use strong or abrasive detergents.Use a
piece of lens tissue or cotton tipped applicator and ethanol.
Do not attempt to aim the camera at the sun
Do not attempt to aim the camera at the sun or other extremely brightobjects that
causes mear to appear irrespective of whether the camera is operating or not.
This can damage the sensor.
Do not put the camera in a place with interference.
When this camera is installed near the equipment like wireless communication
device which emits strong electromagnetic field, some irregularity such as noise
on monitor screen may happen.
BLSBFP25/1.0AHD
The waterproof camera adopt 1.0 mega pixels 720P@25/30fps high performance
720P sensor. The camera adopt new material with IP66 waterproof standard,
IR-CUT filter, smart-IR control. Fashionable and professional design.
★
several times higher and service life longer than
ordinary LED’s
Long-life IR LED design, whose brightness is
★1.0Megapixel high performance CMOS sensor with 25/30fps@720P.
★Built in IR-CUT, ensure the camera work properly both day and night.
★IP66 waterproof standard.
★SMART-IR, 25 meters IR range.
★Image transmission up to 500 meters.
Video mode switch operation and attention:
1.When camera is powered and connect to default DVR,
keep press OSD cable for 5 seconds to switch video. After
video switched, connect to relevant DVR, it tur ns to
normal image.
2.Each time to connect the power, only can switch one
video mode once. eg.if default for AHD video and switch
to TVI, and then to AHD, it needs cut off the power and
plug in the power again.
Direction UP LEFT
DOWN RIGHT
Video AHD TVI
CVI CVBS
1. Fix the camera to the place you need with three screws.
2. Loose the horizontal adjusting ring, and adjust the camera to the place
you need, then fix the horizontal adjusting ring back.
3. Loose the angle fixed screws, and adjust the camera to the place you need,
then fix the angle fixed screws back.
1 2 3
70.6
84.7
105.5
176.8 Ø76.2
25m
COLOR,BLACKWHIT,AUTO GEN
AUTO/MANUAL
