Brady BradyPrinter S3000 Manuale utente
User Manual
BradyPrinter S3000 ii
Copyright and Trademarks
Disclaimer
This manual is proprietary to Brady Worldwide, Inc. (hereafter "Brady"), and may be revised from time
to time without notice. Brady disclaims any understanding to provide you with such revisions, if any.
This manual is copyrighted with all rights reserved. No portion of this manual may be copied or
reproduced by any means without the prior written consent of Brady.
While every precaution has been taken in the preparation of this document, Brady assumes no liability
to any party for any loss or damage caused by errors or omissions or by statements resulting from
negligence, accident, or any other cause. Brady further assumes no liability arising out of the
application or use of any product or system described, herein; nor any liability for incidental or
consequential damages arising from the use of this document. Brady disclaims all warranties of
merchantability of fitness for a particular purpose.
Brady reserves the right to make changes without further notice to any product or system described
herein to improve reliability, function, or design.
Trademarks
All brand or product names referenced in this manual are trademarks (™) or registered trademarks (®)
of their respective companies or organizations.
© 2018 Brady Corporation. All Rights Reserved.
BradyPrinter S3000 iii
Brady Warranty
Our products are sold with the understanding that the buyer will test them in actual use and determine
for him or herself their adaptability to his/her intended uses. Brady warrants to the buyer that its
products are free from defects in material and workmanship, but limits its obligation under this
warranty to replacement of the product shown to Brady’s satisfaction to have been defective at the
time Brady sold it. This warranty does not extend to any persons obtaining the product from the buyer.
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, AND OF ANY OTHER OBLIGATIONS OR LIABILITY ON BRADY’S PART.
UNDER NO CIRCUMSTANCES WILL BRADY BE LIABLE FOR ANY LOSS, DAMAGE, EXPENSE
OR CONSEQUENTIAL DAMAGES OF ANY KIND ARISING IN CONNECTION WITH THE USE, OR
INABILITY TO USE, BRADY’S PRODUCTS.
Safety and Environment
Please read and understand this manual before using the BradyPrinter S3000 for the first time. This
manual describes all of the main functions of the printer.
Precautions
Before using the
BradyPrinter S3000
, please note the following precautions:
• Read all instructions carefully before operating the printer and prior to performing any
procedure.
• Do not place the unit on an unstable surface or stand.
• Do not place anything on top of the unit.
• Keep the top clear of obstructions.
• Always use the printer in a well ventilated area. Do not block the slots and opening on the unit,
which are provided for ventilation.
• Only use the power source indicated on the rating label.
• Use only the power cord that comes with the unit.
• Do not place anything on the power cord.
BradyPrinter S3000 iv
Technical Support and Registration
Contact Information
For repair or technical assistance, locate your regional Brady Technical Support office by going to:
•
United States:
www.bradyid.com
•
Europe:
www.bradyeurope.com
•
Asia Pacific:
www.brady.co.uk/landing-pages/global-landing-page
•
Australia:
www.bradyid.com.au
•
Canada:
www.bradycanada.ca
•
Latin America:
www.bradylatinamerica.com
Registration Information
To register your printer, go to:
•
www.bradycorp.com/register
•
Australia:
www.bradyid.com.au/register
•
China:
www.brady.com.cn/membercenter/register_product.aspx
Repair and Return
If for any reason you need to return the BradyPrinter S3000 printer for repair, please contact Brady
Technical Support for repair and replacement information.
Document Conventions
When using this document, it is important that you understand the conventions used throughout the
manual.
• All user actions are indicated by Bold text.
• References to menus, dialog boxes, button and screens are indicated by Italics text.
BradyPrinter S3000
v
Contents
1 • Introduction
Features and Functions ............................................................................................ 1
Compatible Applications........................................................................................... 2
System Specifications............................................................................................... 2
Button Actions........................................................................................................... 2
2 • Setup
Unpacking and Setting up Printer............................................................................ 3
What’s in the Box ..................................................................................................3
Printer Components ..............................................................................................4
Power.......................................................................................................................... 5
Setup .....................................................................................................................5
Power Save Mode .................................................................................................5
Put the Printer into Sleep Mode ............................................................................6
Wake the Printer from Sleep Mode .......................................................................6
Reboot the Printer .................................................................................................6
Install or Change Supplies........................................................................................ 7
Ribbon ...................................................................................................................7
Install or Change Label Supplies ..........................................................................8
Recycling the Label and Ribbon Cartridges ......................................................... 10
Dismantling the Ribbon Cartridge .......................................................................10
Recycling Components ................................................................................11
Dismantling the Label Cartridge ..........................................................................12
Recycling Components ................................................................................13
Connecting the Printer............................................................................................ 14
Configuring a Direct USB Connection .................................................................14
Setting System Defaults.......................................................................................... 15
3 • Printing Labels
Navigation and Status............................................................................................. 16
Material Details ...................................................................................................16
Creating Labels........................................................................................................ 17
Print Adjustments.................................................................................................... 17
Print Energy ........................................................................................................17
Horizontal Offset .................................................................................................18
Vertical Offset ......................................................................................................18
Print Speed .........................................................................................................18
Cutting Options ...................................................................................................18
Printing Labels ........................................................................................................ 19
Feeding and Cutting Label Stock ........................................................................19
4 • Using System Tools
Installing Firmware Upgrades................................................................................. 20
BradyPrinter S3000
vi
5 • Maintenance
Display System Information.................................................................................... 21
Pre-maintenance Operations.................................................................................. 21
Cleaning the Printer................................................................................................. 23
Cleaning Residue from Printer ............................................................................23
Cleaning the Display ...........................................................................................23
Cleaning the Cutter Blade ...................................................................................24
Cleaning the Sensors ..........................................................................................26
Cleaning the Cutter Blade Exit Area ...................................................................27
Dust Cleaning ......................................................................................................28
Cleaning the Print Head ......................................................................................28
Replacing the Supply Wiper ................................................................................... 29
Clearing Jams .......................................................................................................... 30
Printer Jam ..........................................................................................................30
Cutter Jam ...........................................................................................................30
6 • Troubleshooting
A • Regulatory Compliance
Agency Compliance and Approvals....................................................................... 34
United States .......................................................................................................34
FCC Notice ...................................................................................................34
Canada ................................................................................................................34
Mexico .................................................................................................................34
Europe .................................................................................................................35
RoHS Directive 2011/65/EU, 2015/863/EU ..................................................35
Batteries Directive 2006/66/EC ....................................................................35
Turkey .................................................................................................................35
China and Taiwan ...............................................................................................35
B • Licensing
End User License Agreement for Microsoft Windows CE©................................. 36
BradyPrinter S3000 1
1 Introduction
Thank you for purchasing the BradyPrinter S3000, which you can use to create and print professional-
looking labels. All you have to do is:
• Drop in a ribbon cartridge. You can choose from a wide range of single-color ribbons.
• Drop in a label cartridge. You can choose widths that range from 0.5 in. to
4 in. (12.7 mm to 101.6 mm), and come in many colors, styles, and materials.
• Send labels for printing from your labeling software.
Labels and ribbons from Brady Corporation are programmed with the ability to communicate with the
printer and software. This allows you to gain the full benefit of the system.
Features and Functions
The following are just some of the features that make this system so easy to use and ready to meet
your label-making requirements:
• Small, lightweight (approximately 11.5 lbs [5.2 kg]) unit, ready for your desktop.
• Color touch screen LCD display input.
• Single-color job printing at 300 DPI, up to 4 in. (101.6 mm) wide and up to
60 in. (1.5 m) long.
• Wide variety of ribbon colors.
• Easy loading label and ribbon supplies.
• Continuous and die-cut label supplies in a variety of high-performance materials.
• Print labels from PC.
• Automatic cutter.
BradyPrinter S3000 2
Introduction
Compatible Applications
Compatible Applications
The BradyPrinter S3000 is compatible with Brady
®
Workstation desktop software.
When used with Brady Workstation software, the printer will automatically recognize all enabled and
compatible materials up to 4 in. (101.6 mm) wide. For operation of the printer with other software, refer
to the documentation for your application.
Note: Only
BradyPrinter S3000
supplies will work with this printer.
System Specifications
•Weight: 11.5 lbs (5.2 kg)
•Dimensions (stored): 9 in. x 12.0 in. x 9.5 in. (22.9 cm x 30.5 cm x 24.1 cm)
•Operating Temperature: 50 - 104°F (10-40°C)
•Relative Humidity: 10% to 80% RH non-condensing
•Storage: -4 to 122°F (-20 to 50°C) at 15% to 90% RH non-condensing
•Voltage: 100-240 VAC 50/60 Hz, 2A
•Print Resolution: 11.8 dot/mm, 300 dpi
•Output label size: 0.5 in. to 4 in. (12.7 mm to 101.6 mm)
•Maximum label length (continuous): 60 in. (1.5 m)
Button Actions
There are three physical buttons on the front of the printer. Their function is described below.
• The power button turns the printer on/off and is also used for sleep mode (see page 6).
• The feed button advances the label. See page 19 for more information.
• The cut button allows you to manually cut the label.
BradyPrinter S3000 3
2Setup
Unpacking and Setting up Printer
Carefully unpack and inspect the printer surfaces (interior and exterior) and the labeling system for
possible damage during shipping.
Note: Be sure to remove any transportation protection from around the print head and inside the
enclosure cover.
What’s in the Box
• BradyPrinter S3000
• Documentation CD including: electronic Quick Start Guide, electronic User’s Manual and web
links
•PowerCord
• USB Type B Cable
• Printed “Quick Start Guide”
• Cleaning Kit
Note: Please keep the original packaging, including the box, in case the printer must be returned.
CAUTION! If shipping the printer, consult with your transportation carrier for
state, federal, municipal, and international shipping regulations
regarding the lithium ion battery contained in the printer.
BradyPrinter S3000 4
Setup
Unpacking and Setting up Printer
Printer Components
Note: The printer is equipped with a universal power supply and can be operated with a voltage of
100 to 240 V~, 50- to 60 Hz. The printer senses the voltage type and automatically adjusts
for the power source.
1 Display (with touchscreen) 2 Power Button
3 Enclosure Cover 4 Label Exit Chute
5 Supply Wiper 6 Supply Guides
7 Label Supply Roll 8 Cutter
9 Ribbon Cartridge 10 Print Head Door
11 (a) USB Ports,
(b) Power Cord Connector and
(c) Power Switch
1
3
4
9
5
711
10
8
2
6
ab
c
Indice
Altri manuali Brady Stampante
Brady
Brady BP-IP300 Manuale utente
Brady
Brady BMP 41 Manuale utente
Brady
Brady IP Printer series Manuale utente
Brady
Brady LS2000 Manuale utente
Brady
Brady TLS2200 Manuale utente
Brady
Brady BradyPrinter M611 Manuale utente
Brady
Brady Tagus Manuale utente
Brady
Brady SLV-DAT-PRO Manuale utente
Brady
Brady BBP81 Manuale utente
Brady
Brady BradyJet J1000 Manuale utente
Brady
Brady THT MVPplus Manuale utente
Brady
Brady PAM 3600 Manuale utente
Brady
Brady BBP12 Manuale utente
Brady
Brady BradyPrinter M611 Manuale utente
Brady
Brady BradyJet J4000 Manuale utente
Brady
Brady BBP16 Manuale utente
Brady
Brady BBP 33 Manuale utente
Brady
Brady PAM 3600 Manuale
Brady
Brady BP-1244 Manuale utente
Brady
Brady BradyPrinter M611 Manuale utente
