BRAYER BR1606 Manuale utente
Instruction manual
Инструкция по эксплуатации
Meat grinder BR1606
Мясорубка BR1606
brayer.ru
СОДЕРЖАНИЕ
EN......................................................................................................................................3
DE....................................................................................................................................14
RU ...................................................................................................................................28
KZ....................................................................................................................................41
3
EN
MEAT GRINDER BR1606
The electric meat grinder is intended for making minced
meat or minced sh and for making homemade semi-
nished products.
DESCRIPTION
1. Operation mode switch (ON/OFF/R)
2. Body
3. Meat grinder head lock button
4. Meat grinder head installation place
5. Pusher
6. Food tray
7. Meat grinder head body
8. Screw
9. Crossed blade
10. Coarse and ne cutting plates
11. Meat grinder head nut
12. Sausage lling attachment
13. Kebbe attachments
14. Juice extractor body
15. Adjusting screw
16. Lid
17. Plastic ring
18. Grid
19. Juice extractor screw
20. Juice tray
EN
4
EN
1
2
3
14
15 16
23
23
24 25
4
5
6
1312
11
10 9 8
7
5
EN
Pic. 4
Pic. 9
Pic. 5
Pic. 10
Pic. 1
Pic. 6
Pic. 2
Pic. 7
Pic. 12
Pic. 3
Pic. 8
Pic. 13
Pic. 11
6
EN
Pic. 17
Pic. 21
Pic. 14
Pic. 18
Pic. 15
Pic. 19
Pic. 16
Pic. 20
7
EN
SAFETY MEASURES AND OPERATION
RECOMMENDATIONS
Read the operation manual carefully before using
the meat grinder; after reading, keep it for future
reference.
• Use the unit for its intended purpose only, as it is
stated in this manual.
• Mishandling the meat grinder can lead to its
breakage and cause harm to the user or damage to
his/her property and it is not covered by warranty.
• Make sure that the operating voltage of the unit
indicated on the label corresponds to your home
mains voltage.
ATTENTION! Continuous operation time should
not exceed 5 minutes, after that make at least
10minutes break.
• Do not use the unit outdoors.
• It is recommended not to use the unit during lightning
storms.
• Place and use the meat grinder only on a dry at and
stable surface, away from heat sources, open ame
and direct sunlight.
• Do not use the unit near heating appliances, heat
sources or open ame.
• Do not use the meat grinder in places where aerosols
are stored, used or sprayed, and in proximity to
inammable liquids.
• Protect the unit from blows, drops, vibrations and
other mechanical stress.
• Do not block the ventilation openings on the unit
body during the meat grinder operation; this may lead
to the electric motor overheating.
• Never leave the unit connected to the mains
unattended.
• Do not immerse the meat grinder body, the power
cord or the power plug into water or any other liquids.
• Do not use the unit in proximity to the kitchen sink, in
bathrooms, near swimming pools or other containers
lled with water.
• If the unit is dropped into water, unplug it
immediately, and only then you can take the unit out
of water. Apply to the authorized service center for
testing or repairing the unit.
• Do not let the power cord touch hot surfaces and
sharp edges of furniture.
• Handle the power cord with care, avoid twisting it and
periodically straighten the cord.
• Do not use the power cord as a carrying handle for
the meat grinder.
• Do not touch the unit body, the power cord and the
power plug with wet hands.
• Unplug the unit after usage or before cleaning. When
unplugging the unit, hold the power plug and carefully
remove it from the mains socket, do not pull the
power cord, as this can lead to its damage and cause
a short circuit.
8
EN
• Before using the unit for the rst time, wash
thoroughly all the removable parts of the meat
grinder that will contact food.
• Use only the parts supplied with the meat grinder.
• Before switching the unit on, make sure that all parts
of the meat grinder are installed properly.
• Regularly clean the meat grinder body and the parts
which were used during the operation.
• For child safety reasons do not leave polyethylene
bags used as packaging unattended.
ATTENTION! Do not allow children to play with
polyethylene bags or packaging lm. Danger of
suocation!
• The unit is not intended for usage by children.
• Do not leave children unattended to prevent using
the unit as a toy.
• Do not allow children to touch the unit body, the
power cord or the power plug during operation of the
unit.
• Be especially careful if children or disabled persons
are near the operating unit.
• During the unit operation and breaks between
operation cycles, place the unit out of reach of
children.
• The unit is not intended for usage by physically,
sensory, psychically or mentally disabled persons
(including children) or by persons lacking experience
or knowledge if they are not under supervision of a
person who is responsible for their safety or if they
are not instructed by this person on the usage of the
unit.
• Before using the meat grinder, check the power cord
integrity. If the power cord is damaged, it should be
replaced by the manufacturer, a maintenance service
or similar qualied personnel to avoid danger.
• Do not repair the unit by yourself. Do not
disassemble the unit by yourself, if any malfunction
is detected, and after the unit was dropped, unplug it
and apply to the service center.
• To avoid damages, transport the unit in the original
package.
• Keep the unit in a dry cool place out of reach of
children and disabled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD USE
ONLY, DO NOT USE THE UNIT FOR COMMERCIAL
OR LABORATORY PURPOSES.
BEFORE THE FIRST USE
After the unit transportation or storage at negative
temperature, unpack it and wait for at least 3 hours
before using it.
• Unpack the unit and remove all the packaging
materials.
• Keep the original package.
• Read the safety measures and operating
recommendations.
9
EN
• Check the delivery set.
• Examine the unit for damages, in case of damage do
not plug it into the mains.
• Make sure that specied specications of power
supply voltage of the unit correspond to the
specications of your mains.
• Wash all the removable parts (5, 6, 7, 8, 9, 10, 11,
12, 13) with warm water and neutral detergent, rinse
and dry them.
• Wipe the meat grinder body (2) with a slightly damp
cloth, and then wipe it dry.
BASIC TIPS FOR USING THE MEAT
GRINDER
• The electric meat grinder is intended for household
use only, for making minced meat or minced sh and
for making homemade semi-nished products.
• Do not process food with hard ber (for example,
ginger or horseradish) in the meat grinder.
• Place a suitable bowl under the meat grinder head
(7).
• Switch the meat grinder on and slowly feed the meat
pieces into the mouth of the grinder head (7) using
the pusher (5).
• During operation, use only the pusher (5) supplied
with the unit. Do not apply excessive eort while
pushing the meat or other products.
• Do not push meat with your hands or any other
objects.
• If an obstruction appears during the unit operation,
use the reverse function (the screw reverse mode) to
remove it. To switch the reverse mode on, switch the
meat grinder o by setting the operation switch mode
(1) to the position «OFF», then press and hold the
switch (1) in the position «R» (reverse) for several
seconds, and then release the switch (1).
• After the operation is nished, switch the meat
grinder o by setting the operation mode switch
(1) to the position «OFF», unplug the unit and then
disassemble it.
MAKING MINCED MEAT
• Insert the mead grinder head (7) to the installation
place (4) (pic. 1), press the lock button (3) and turn
the meat grinder hear (7) counterclockwise until it is
xed (pic. 2).
ATTENTION! Continuous operation time should not
exceed 5 minutes, after that make at least 10minutes
break.
• Assenble and use the meat grinder only on a dry at
and stable surface, away from heat sources, open
ame and direct sunlight.
• Make sure that the ventilation openings on the meat
grinder body are not blocked with any foreign objects.
• Before making minced meat, make sure that all
bones and excess fat are removed.
10
EN
• Install the screw (8) into the meat grinder head (7)
body (pic. 3).
• Install the crossed blade (9) (pic. 4).
• Select one of the plates (10) and set it over the
blade, matching the ledges on the plate with the
grooves on the meat grinder head body (7) (pic. 5),
tighten the nut (11) (pic. 6).
• During the operation always use only the pusher (5)
(pic. 7).
- During operation, use only the pusher (5) supplied
with the unit. Do not apply excessive eort while
pushing the meat or other products.
- Do not push meat with your hands or any other
objects.
• After the operation is nished, switch the meat
grinder o by setting the operation mode switch
(1) to the position «OFF», unplug the unit and then
disassemble it.
• To disassemble the meat grinder head (7), unscrew
the nut (11) by turning it counterclockwise, remove
the installed plate (10) from the meat grinder head
(7) body, remove the crossed blade (9) and the screw
(8).
• To remove the meat grinder head (7), press the lock
button (3), turn the meat grinder head (7) clockwise
and remove it.
MAKING KEBBE
• Kebbe, Kibbeh or kubba is a Mediterranean dish
cooked of beef or mutton, wheat our and spices.
• Use the kebbe attachment (13) to make hollow rolls
of the base. The rolls are lled and deep fried. Try
making various llings for the rolls.
• Here is an example kebbe recipe, you can nd other
recipes on the Internet.
• Filling
- Mutton 100 g
- Olive oil 1,5 table spoon
ATTENTION!
• When installing the blade (9), make sure that the
cutting edges of the blade (9) face the plate (10).
If the blade is installed improperly, it will not grind
meat.
• The ne cutting plate (10) can be used for
processing both raw and cooked meat, sh, etc.
• The coarse cutting plate (11) can be used for
processing raw meat, sh, vegetables, dried fruit,
cheese, etc.
• Install the food tray (6) on the meat grinder head (7).
• Insert the power plug into the mains socket.
• Switch the meat grinder on by setting the operation
mode switch (1) to the position «ON».
• Recommendations:
- Defrost frozen meat thoroughly. For better
processing, cut meat into strips (20x20x60 mm) or
cubes (20x20x20 mm).
Indice
Lingue:
Altri manuali BRAYER Tritacarne
BRAYER
BRAYER BR1608 Manuale utente
BRAYER
BRAYER BR1602 Manuale utente
BRAYER
BRAYER BR1603 Manuale utente
BRAYER
BRAYER BR1601 Manuale utente
BRAYER
BRAYER BR1604 Manuale utente
BRAYER
BRAYER BR1607 Manuale utente
BRAYER
BRAYER BR1605 Manuale utente
BRAYER
BRAYER BR1609 Manuale utente
BRAYER
BRAYER BR1600 Manuale utente
