Brickcom OSD-040 36x Series Manuale utente

36x Outdoor Speed Dome

Network Camera

OSD-040 36x Series

Quick Installation Guide

Quality Service Group

Read Before You Use

1. Power off the camera device

immediately if it starts smoking or

smells unusual.

2. Power off the camera device

immediately if the camera is exposed

to rain or liquid.

3. Do not set the camera device near

any heat sources. (Ex: television and

oven)

4. Keep the camera device away from

direct sunlight.

5. Do not set the camera device over the specific

operating temperature.

6. Do not set the camera device in any wet

and humid environments.

7. Do not set the camera device on

unsteady surfaces.

8. Do not attempt to dismantle the camera

device.

9. Do not drop or hit the camera device.

10. Do not use the camera device when

there is lightning.

1. Check Package Contents

a. Speed Dome Camera

b. Mount Kit

c. I/O Cable

d. Waterproof Rubber

e. Warranty Card

f. M5 Screw

g. Dome Cover

h. Lubricant

i. Product CD

j. Screw for Dome Cover

k. Easy Installation Guide

2. Device Description

Mount

Holder

Ethernet RJ45

10/100 Socket

Safety Wire Hook

I/O Cable Connector

Reset Button

Power LED

Link LED

Audio Out(Pink)

AC Power Input

Extension I/O

Terminal Block

Video Out

Microphone/Line In(Green)

3. Camera Connection

1. Connect the camera to a switch using an Ethernet cable.

2. Connect supplied I/O cable to the camera.

3. To attach external devices, such as sensors and alarms, connect them

to the extension I/O terminal block.

4. Hardware Installation

Before Installation

The SD-040 36x is supplied with a dome cover to protect the camera unit.

Before installation, follow these instructions to attach the dome cover and

remove the mount holder.

1. Unpack the dome package and take out the Dome body.

2. Rotate the mount holder and take it off the Dome body.

3. Remove the protective cover and PE sheet.

4. Apply lubricant to the Dome cover’s water-proof rubber to make the

installation process smoother.

NOTE: The tiny protrusion on the dome cover must align with one of

the four holes on the dome body.

5. Attach the Dome cover to the Dome body by gently pressing down on

the sides of the Dome cover with both hands.

NOTE: DO NOT press the cover from the top as this may cause

damage to the Dome body.

6. Screw the Dome cover and body together.

Install Camera with Mount Kit

1. Make a cable entry hole on the wall/ ceiling to insert the cable(s).

2. Mount the Speed Dome camera according to the “Speed Dome

Mounting Accessories Installation Guide”.

3. Attach the waterproof rubber to the selected mount kit.

4. Route the Ethernet and I/O cables through the top holder and join the

selected mount kit with supplied screws and washers. Then adjust the

Waterproof Rubber over the joint.

5. Connect the Ethernet and I/O cables and hook the safety wired to the

camera.

6. Attach the camera to the top cover with the supplied screw and

washers.

Wall Mounting: Pendant Mount (mounting example)

NOTE: Refer to the mounting instruction in the “Speed Dome Mounting

Accessories Installation Guide” for more details.

5. Setup the Network Camera

1. Insert the Installation CD into the CD-ROM driver. Run Auto-Run Tool

directly from the CD-ROM to start the installation. When installing the

Brickcom software kit for the first time, select a desired language for the

interface. The available languages are listed in the scroll box. Click

<Install> and follow the steps to install the EasyConfig wizard on the

desired computer.

Please follow the instruction of the InstallShield Wizard to finish the

Brickcom Software Kit installation.

Altri manuali per OSD-040 36x Series

Indice

Altri manuali Brickcom Telecamera di sicurezza

Brickcom

Brickcom FB-100A Series Manuale utente

Brickcom

Brickcom VD-131Af Manuale utente

Brickcom

Brickcom OB-100A Manuale utente

Brickcom

Brickcom FB-100Ae Series Scheda tecnica

Brickcom

Brickcom MD-100A series Manuale utente

Brickcom

Brickcom OSD-040 36x Series Manuale utente

Brickcom

Brickcom VD-130A V2 Series Manuale utente

Brickcom

Brickcom VD-E400Af Istruzioni per l’uso

Brickcom

Brickcom PZ-040 12x Series Manuale utente

Brickcom

Brickcom MD-500Ap Series Manuale utente

Brickcom

Brickcom OB-100A V2 series Istruzioni per l’uso

Brickcom

Brickcom Outdoor Bullet V2 Series Scheda tecnica

Brickcom

Brickcom OB-E400AF Scheda tecnica

Brickcom

Brickcom MB-500A Series Manuale utente

Brickcom

Brickcom WCB-100A Manuale utente

Brickcom

Brickcom CB-100A Series Manuale utente

Brickcom

Brickcom Fixed Dome Series Scheda tecnica

Brickcom

Brickcom VD-E200Af series Istruzioni per l’uso

Brickcom

Brickcom OB-500Af Series Scheda tecnica

Brickcom

Brickcom OB-E400AF Istruzioni per l’uso

Brickcom

Brickcom Bullet Series Istruzioni per l’uso

Brickcom

Brickcom WFB-100A Manuale utente

Brickcom

Brickcom Vandal Dome Series Scheda tecnica

Brickcom

Brickcom OB-500Af V5 Series Scheda tecnica

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente