Brickcom CB-100A Series Manuale utente

Megapixel (PoE) Cube Network Camera

CB-100A/CB-101A/CB-102A Series

Quick Installation Guide

Quality Service Group

Read Before You Use

1. Power off the camera device

immediately if it starts smoking or

smells unusual.

2. Power off the camera device

immediately if the camera is exposed to

rain or liquid.

3. Do not set the camera device near any

heat sources. (Ex: television and oven)

4. Keep the camera device away from

direct sunlight.

5. Do not set the camera device over the

specific operating temperature.

6. Do not set the camera device in any wet

and humid environments.

7. Do not set the camera device on

unsteady surfaces.

8. Do not attempt to dismantle the camera

device.

9. Do not drop or hit the camera device.

10. Do not use the camera device when

there is lightning.

1. Check Package Contents

a. Network Camera

CB-100A/CB-101A CB-102A

b. Product CD

c. Camera Stand

CB-100A/CB-101A CB-102A

d. Warranty Card

e. Terminal I/O Connector Block

(CB-101A/CB-102A)

f. Easy Installation Guide

g. 1.5m White Flat RJ-45 cable

(CB-100A)

h. Power Adapter(CB-100A)

2. Device Description

<CB-100A/CB-101A>

Adjustable focal Lens

Built-in

Microphone

PIR(*)

Illumination LED(*)

Speaker(*)

<CB-102A>

Reset Button

Terminal I/O Connector

Ethernet RJ45

10/100 Socket

Power Connector

Reset Button

NOTE: (*) These are optional features. Please refer to the Product List for the

full list of optional features available for the product.

3. Connecting the CS-Mount Lens to CB-102A

1. Connect the CS-mount lens to the camera by turning it clockwise onto the

camera mount until it stops.

2. Adjust the focus controller to get the best resolution.

Micro SD slot(*)

Privacy button(*)

WPS button

(WCB-100A Only)

Power LED

WPS LED (WCB-100A)

Firmware upgrade LED

(CB-100A/CB-101A/CB-102A)

Status LED

Internet LED

Privacy LED

4. Camera Connection

<CB-100A>

Basic Connection

1. Connect the supplied power cable from the camera to the power outlet.

2. Connect the camera to a switch via Ethernet cable.

<CB-101A/CB-102A>

1 Terminal I/O Connector Block Connection

1.1 The supplied terminal I/O connector block can be used to connect

external devices, such as sensors and alarms to the camera. Use

the diagram above to attach the external devices to the connector

block. Attach the connector block to the terminal connector on the

camera.

2 Basic Connection (Without PoE)

2.1 Connect the camera to a switch using a standard Ethernet cable.

2.2 Connect the power adapter from the camera to a power outlet.

Note: DC12V 1A power adapter is required.

3 Power over Ethernet (PoE) Connection

3.1 The CB-101A is PoE compliant, so there are two options for

connecting the camera to a power and Ethernet source. The

camera can either be connected to a PoE-enabled switch or a

non-PoE switch.

A. If using a PoE-enabled switch:

1. Use a single Ethernet cable to connect the camera to the

PoE-enabled switch.

B. If using a non-PoE switch:

1. Use a standard Ethernet cable to connect the camera to a PoE Injector.

2. Use a standard Ethernet cable to connect the PoE Injector to the non-PoE

switch.

3. Use a standard power cable to connect the PoE Injector to a power outlet.

5. Setup the Network Camera

1. Insert the Installation CD into the CD-ROM driver. Run Auto-Run Tool

directly from the CD-ROM to start the installation. When installing the

Brickcom software kit for the first time, select a desired language for the

interface. The available languages are listed in the scroll box. Click

<Install> and follow the steps to install the EasyConfig wizard on the

desired computer.

Please follow the instruction of the InstallShield Wizard to finish the

Brickcom Software Kit installation.

Altri manuali per CB-100A Series

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Brickcom Telecamera di sicurezza

Brickcom

Brickcom FD-300Ap series Istruzioni per l’uso

Brickcom

Brickcom FB-100A Series Manuale utente

Brickcom

Brickcom FB-100A Series Manuale utente

Brickcom

Brickcom FB-H200Np-S-WDRPro Scheda tecnica

Brickcom

Brickcom OB-130Np Istruzioni per l’uso

Brickcom

Brickcom FD-100A Series Manuale utente

Brickcom

Brickcom VD-130A V2 Series Manuale utente

Brickcom

Brickcom Vandal Dome V2 Series Manuale utente

Brickcom

Brickcom MD-100A series Manuale utente

Brickcom

Brickcom CB-100A Series Manuale utente

Brickcom

Brickcom CB-100A Series Manuale utente

Brickcom

Brickcom OSD-200A 20xp Scheda tecnica

Brickcom

Brickcom Economy Outdoor Bullet Series Scheda tecnica

Brickcom

Brickcom FD-100A Series Manuale utente

Brickcom

Brickcom VD-131Af Manuale utente

Brickcom

Brickcom OB-302Ae V5 Series Istruzioni per l’uso

Brickcom

Brickcom OB-E200Af Istruzioni per l’uso

Brickcom

Brickcom Fixed Dome Series Scheda tecnica

Brickcom

Brickcom VD-130Af Manuale utente

Brickcom

Brickcom FD-100A Series Manuale utente

Brickcom

Brickcom FB-130Np Series Manuale utente

Brickcom

Brickcom FB-500A series Manuale utente

Brickcom

Brickcom Mini Box Series Manuale utente

Brickcom

Brickcom OB-500Af V5 Series Scheda tecnica

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente