Britton Yuki2 Manuale utente
Söögitool Britton Yuki
²
ET
Highchair Britton Yuki²
EN
Syöttötuoli Britton Yuki
²
FI
LT
Valgomoji vaikiška kėdė„Britton Yuki
²
“
Barošanas krēsls Britton Yuki
²
LV
Детский стул для кормления Britton Yuki
²
RU
PL
Krzesełko do karmienia Britton Yuki
²
SV
Jedálenská stolička Britton Yuki
²
SK
Matstolen Britton Yuki
²
1
1. 2. 3.
4. 5. 6.
List of parts Osad Osat Daļas Dalys Детали Lista części Zoznam častí Detaljer
Assembly Kokkupanek Kokoaminen Montāža Surinkimas Сборка
Montaż nóg Montáž Montering
a
Fixing the feet Jalgade kinnitamine Jalkojen kiinnittäminen Kāju piestiprināšana
Kojelių pritvirtinimas Установка оснований ножек Montaż stopy
Upevnenie opierky na nohy Benens fastsättande
2
Ftting the seat cover Istmekatte paigaldamine Istuinsuojan asentaminen
Sēdekļa pārvalka novietošana Sėdimosios dalies dangos pritvirtinimas
Установка чехла Montaż tapicerki Upevnenie sedačky Placering av sätets överdrag
a
3
Ftting the tray Kandiku kinnitamine Tarjottimen kiinnittäminen
Paplātes piestiprināšana Padėklo pritvirtinimas Закрепление подноса
Montaż tacy Upevnenie podnosu Brickans montering
Harness Turvarihmad Turvavyöt Drošības jostas Saugos diržai
Ремни безопасности Pasy bezpieczeństwa Bezpečnostné pásy Säkerhetsbälten
AA
A
B
A
B
cd
a
4
Adjusting the seat height and recline
Istme kõrguse ja seljatoe kalde muutmine
Istuimen korkeuden ja selkänojan kaltevuuden muuttaminen
Sēdekļa augstuma un atzveltnes slīpuma mainīšana
Sėdynės aukščio ir atlošo pasvirimo reguliavimas
Изменение высоты и наклона сиденья
Regulacja wysokości siedziska i odchylanie
Regulovanie výšky a sklonu jedálenskej stoličky
Ändring av sätets höjd och ryggstödets lutning
b
a
5
Folding the highchair Tooli kokkupanek Tuolin kasaaminen
Krēsla salikšana kopā Kėdutės sudėjimas Складывание стула
Składanie krzesełka Skladanie jedálenskej stoličky Stolens demontering
Adjusting the footrest Jalatoe kõrguse muutmine Jalkatuen korkeuden muuttaminen
Kāju atbalsta pielāgošana Kojų atramos pritvirtinimas Регулировка подножки
Zdejmowanie podnóżka Regulácia opierky na nohy Ändring av fotstödets läge
b
a
6
IMPORTANT
Read carefully and retain for future reference.
Highchair Britton Yuki is suitable for children who are able to sit unaided (appr. 6-9
months up to 36 months).
The multi-position height adjustment of the highchair means that it is suitable for
use from breakfast bar to coee table and its recline seat allows baby to relax.
Britton Yuki is free standing when folded for your convenience.
The large wipe clean tray can be quickly adjusted or removed.
The luxurious padded cover is easily removable for cleaning.
Safety notes
• Do not leave your child unattended.
• Do not use the highchair until your child can sit up unaided.
• Ensure your child wears a correctly tted and adjusted harness at all the times.
• Do not use highchair if any part is broken, torn or missing.
• Do not move the highchair with your child inside.
• Use only on a level and stable surface.
• Do not allow your child to climb unassisted into, play with or hang onto your
highchair. This is not a toy.
• Ensure children clear of all moving parts before making any adjustment.
• Do not use near stairs or steps.
• All additional hazards such as electrical ex should be kept out of reach of the
child in highchair.
• When not in use, store away form children.
• Do not use the highchair for a manner it was not designed for.
• Only use spares approved by manufacturer.
• Complies with BS EN 14988:2006.
Care & Maintenance
• Ensure all locking devices work correctly & regularly check the locks & ttings for
security.
• DO NOT use spray lubricants, simply wipe clean after use
• Stubborn marks can be removed with non-abrasive cream cleaner. Mild disinfec-
tants can also be used.
EN
7
Parts
Please retain all packaging until you are certain no parts are missing.
After assembly, please dispose of all packaging carefully, including the caps on the
ends of the legs.
1. Seat Unit
2. Two Part serving tray
3. Front and Rear feet
4. Left and Right legs
5. Stop washer and screw x 2
6. Seat cover
Assembly
Take either the left or right leg (4), press and hold the red button (a) and extend
the leg then release the red button. Take the other leg and follow the above
procedure.
Take the legs and noting the orientation in the diagram insert the legs into the top
of the seat unit adjusting brackets.
To lift the seat unit to the top of the legs simply press and hold the red buttons on
the seat unit adjustment brackets and lift. There are six positions bottom being“6”
and top being“1”.
Fixing the feet
Turn the highchair upside down.
Please note that each of the four legs has a sprung loaded pin.
Line up one of the feet so that the small hole in the top of the foot lines up with
the pin.
Push rmly on the foot at either end until each of the two sprung pins click into
place within the small hole in the foot. Repeat for other foot.
Note the rear foot is indicated by a red circular sticker located on the white plastic
foot.
Take one stop washer and insert the screw then insert into the bottom hole at the
rear of the front left legs and repeat the process on the right leg.
Ftting the seat cover
Slide the pocket of the seat cover back over the curved back frame.
Secure the seat sides by wrapping them around the frame and fastening press
studs (a) at each side of the seat.
Ftting the tray
Position the tray to front of the arms, pull the front lever (a) found on the under
side of the tray, whilst sliding the tray along with the slot (b) to the position
required.
The tray has three positions only as indicated on the armrests, line the tray with
the desired position, release the lever to lock position.
8
In the case the tray is not automatically locked onto the armrests, move the trays
lightly until adouble click is heard signalling the tray is securely locked.
WARNING: Never leave the tray tted in a position in which the warning signs are
visible.
The top tray can be removed by pulling at the ridge (c) and (d).
To replace again, position the top tray over the bottom tray and push down to
secure.
The tray maybe stored on the back legs of the highchair. Align the holes in the rear
of the tray with the small pegs on the back legs.
Harness
A ve-point safety harness is provided to restrain your child and should always be
worn.
Sliding adjusters are tted and should be carefully adjusted so the harness ts
your child comfortably.
To fasten the harness push the prongs into the buckle.
To release, push the prongs (A) and remove from the buckle.
Pass the ends of the shoulder, waist and crotch straps through the vertical slots in
the lower backrest, rotate the ends, and pull back to secure.
The seat cover should come already positioned on the highchair, however it may
be necessary to remove these components for cleaning purposes.
To remove the seat insert undo the harness and thread the shoulder and crotch
straps through the seat insert slots and simply remove.
IMPORTANT: SAFETY NOTE
The seat cover may be sponge cleaned only. If you feel the need to remove the
seat cover, for ease of cleaning, please ensure that you carefully follow the
instructions outlined in part 7 on how to correctly re-thread the safety harness.
Adjusting the seat height and recline
Note: Do not adjust the height of the seat whilst the child is seated in the chair.
To adjust the height of the seat push in both of the height adjusting locks (a) and
simultaneously raise or lower the seat, releasing both of the locks at the required
height.
To adjust the angle of the seat, lift the plastic lever (b) (found on the back of the
seat unit) and position as required, releasing the mechanism to secure into place.
DO NOT recline the seat unit when the highchair is in its highest position.
IMPORTANT
If the height adjustment becomes dicult after a period of use and as part of the
regular maintenance routine, DO NOT use spray lubricants, simply wipe clean after
use.
Indice
Lingue:
Altri manuali Britton Seggiolone
