BrookVent BTP EC 100 Istruzioni per il montaggio

BTP EC

Duct fan

brookvent.co.uk

Installation, maintenance &

user manual

 
2/15 brookvent.co.uk 
 
 
 
CONTENTS 
INTRODUCTION .......................................................................................3 
REMARKS ..................................................................................................4 
TRANSPORT AND PACKAGING...............................................................5 
INSTALLATION GUIDELINES ...................................................................5 
ELECTRICAL CONNECTION .....................................................................7 
COMMISSIONING ....................................................................................9 
MAINTENANCE.........................................................................................9 
DISPOSAL................................................................................................10 
GUARANTEE ...........................................................................................10 
DENIAL OF LIABILITY FOR CONSEQUENTIAL DAMAGES ...................10 
OPERATIONAL INSPECTIONS: ..............................................................11 
ACCEPTANCE CERTIFICATE ...................................................................12 
TABLE OF INSPECTIONS........................................................................13 
NOTES .....................................................................................................14 
 

3/15 brookvent.co.uk

1. INTRODUCTION

Thank you for the trust you placed in BROOKVENT by purchasing

the BTP EC series fan, created in

accordance with technical rules that

meet the requirements of EU

standards. Before installation and

commissioning, please read these

operating instructions carefully as they

contain safety instructions for

installing, operating and maintaining

this product. When the installation is

complete, please pass this manual to

the end user. When unpacking, check

that the device is in good condition, as

damage caused by the

manufacturer/supplier is covered by

the warranty. Please check that the

equipment delivered and the data on

the nameplate correspond to your

order.

Available models of the BTP EC series: 100, 125, 150/160, 200 and

250

THE PACKAGING CONTAINS:

1. Fan

2. Instruction manual

4/15 brookvent.co.uk

2. REMARKS

BTP EC series fans are designed for residential/office (domestic)

ventilation systems. During transportation the fan unit must be

protected from dust and chemicals. the fan unit must be stored at

temperatures not exceeding 60°C.

Do not put the ventilation system into operation before the

completion of construction work.

For the duration of any building repair work:

•it is required to protect all ventilation grates so that

construction dust and other impurities do not get into the

ventilation duct;

•it is recommended to reduce the fan speed to 15-20%, so

that the fan works to ensure that the air flow does not

raise building dust particles;

•during electrical or fan repair work the fan should be off and

isolated from the electrical supply.

Fan designed for continuous operation 24/24 - downtime longer

than 14 days can cause damage to the motor.

The motor control board is protected by a seal with the date of

manufacture: if the seal is broken, the warranty will be voided.

Non-compliance with these guidelines will result in:

•Change parameters to performance

•Loss of warranty on the ventilation system and its

components

•Costs related to system cleaning, fan servicing and control

5/15 brookvent.co.uk

NOTE:

BROOKVENT reserves the right to introduce changes in technical

data and modifications to the documentation without the need to

inform the user.

3. TRANSPORT AND PACKAGING

•The fan is supplied in a package that protects the unit under normal

transport conditions. Do not transport the fan without the original

packaging.

•Store the fan in a dry place.

•Do not move the fan while holding the supply/control cables, the

junction box, the rotor.

4. INSTALLATION GUIDELINES

•After commissioning, the device that includes this fan must comply

with the following directives:

oLow Voltage Directive 2014/35/EU

oEquipment Directive 2006/42/EC

oElectromagnetic Compatibility Directive

2014/30/EU

•Before commencing the installation, remove any temporary

elements protecting the fan against dirt (e.g. cardboard, foil,

blanking plugs - do not confuse them with covers). - Leaving them

for the time of commissioning may cause damage to the device.

Make sure that the unit does not show any signs of damage.

•The fan must be mounted vertically or horizontally. Diagonal

installation is possible, but not recommended. Installation other

than horizontal or vertical may shorten product life. The device is

not designed for external installation.

6/15 brookvent.co.uk

•The structure supporting the device must be capable of supporting

it during full power operation (account must also be taken of

overloads caused by starting, failure, misuse). Use fasteners that

are self-retaining.

•Appropriate protective structures, guards (inlet, outlet, moving

parts) must be installed if they were not used by the manufacturer.

The open inlet of the fan must be protected with a suitable

protective net.

•It is recommended to use measures to minimize the transmission

of vibrations from/to the fan.

•It is recommended to provide a distance of 3 fan inlet diameters

between the inlet and obstacles such as elbows, reducers, filters,

walls.

•After installing the fan, make the electrical connection and check

the rotor rotation direction according to the requirements of the

points indicated in the "electrical connection" section.

•Ensure that no foreign objects (e.g. mounting elements, tools) are

present inside or near the fan, that the rotor is not blocked and

that the fan is properly protected after installation (e.g. closed and

protected bowl, junction box, tightened fasteners).

* The direction of airflow is

indicated by an arrow on

the unit.

7/15 brookvent.co.uk

5. ELECTRICAL CONNECTION

•Make sure that the power supply has been isolated before starting

any operation.

•Any electrical connections may only be made by an appropriately

qualified person.

•We recommend using service switches with a minimum distance

between the contacts of 3 mm.

•We recommend installing the service switch in a visible place within

1 m from the fan and the controller.

•The fan is equipped with a power and control cable.

•Required safeguards:

2A fused spur.

1) BTP EC 100

2) BTP EC 125

3) BTP EC 150/160

4A fused spur.

4) BTP EC 200

5). BTP EC 250

For power supply connection we recommend 3x1.5mm2cable.

8/15 brookvent.co.uk

NOTE

Power supply is connected directly to the mains! Do not connect the

power supply cables to the controller!

•If the voltage at the control signal is not present, the fan will

not work.

To control the fan speed we

recommend using BR-2/010

potentiometer

9/15 brookvent.co.uk

6. COMMISSIONING

•Make sure that there are no loose parts in the immediate vicinity

of the fan that can be sucked in

•Make sure that nothing jams or blocks the rotor

•Make sure that the device is securely fastened

•Make sure that all cables are correctly installed and secured

against tearing out.

•Check that the voltage and frequency values of the mains supply

are identical to those indicated on the nameplate.

•On commissioning:

ocheck if the rotor blades rotate in the direction

marked on the housing

oCheck that there are no undesirable vibrations

7. MAINTENANCE

•Before performing any operation, disconnect the device and

ensure that no one intentionally or accidentally connects the

device!

•Please check:

ocondition of all electrical connections

ocondition of fixings and connections

ocondition of the rotor blades

•It is recommended to carry out a fan inspection:

oafter three months from the commissioning when

installed in new contructions

oafter six months from commissioning and every six

months

•If the inspection does not reveal any irregularities, clean the rotor

blades and housing with a brush or vacuum cleaner every year

after commissionin

10/15 brookvent.co.uk

8. DISPOSAL

Waste equipment should be disposed of in appropriate recycling

containers or waste disposal companies.

9. GUARANTEE

These operating instructions contain information necessary for

transport, installation and safe operation. Failure to observe the

information in this manual or to install the device properly may

void the warranty.

Any possible damage, direct or indirect, caused by incorrect

installation or damage caused by installation carried out by

inexperienced or unauthorized personnel shall not be taken into

account by BROOKVENT. At the time of purchase, check that the

device is complete and delivered as described. Any disputes that

may arise will be dealt with on the basis of the General Purchase

Conditions (GPC) and the General Guarantee Conditions (GGC)

available at https://brookvent.co.uk/

10. DENIAL OF LIABILITY FOR CONSEQUENTIAL DAMAGES

The manufacturer is not responsible for damage to the health of

people or to equipment caused by violation of the terms of this

manual, as well as the use of the fan in a manner inconsistent with

its intended use or in the case of violent mechanical interference.

Indirect damage (e.g. reassembly and connection) is not

compensated for.

Guarantee obligations in the scope of the quality of assembly,

electrical assembly and setting works are borne by the entity which

performed given works.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali BrookVent Fan

BrookVent

BrookVent 90-0103-WDS-01 Istruzioni per il montaggio

BrookVent

BrookVent AIRSTREAM XE+ Istruzioni per il montaggio

BrookVent

BrookVent AIRVENT SM ACOUSTIC Istruzioni operative

BrookVent

BrookVent AirVent SM 1200+ Manuale utente

BrookVent

BrookVent Aircycle 1.1 Manuale di istruzioni

BrookVent

BrookVent aircycle 4.1 Manuale utente

BrookVent

BrookVent airstream DMEV 100 HT Istruzioni per il montaggio

BrookVent

BrookVent AF 90-DMEV-100 Manuale utente

BrookVent

BrookVent AS 92-ACE-H-125 Guida utente

Manuali Fan popolari di altre marche

ELTA FANS

ELTA FANS H03VV-F Manuale utente

Hunter

Hunter 20714 Manuale di istruzioni

Emerson

Emerson CARRERA VERANDA CF542ORB00 Manuale utente

Hunter

Hunter Caraway Manuale di istruzioni

Panasonic

Panasonic FV-15NLFS1 Manuale utente

Kompernass

Kompernass KH 1150 Manuale utente

VES

VES FALA100/12V/TR Manuale utente

Vertiv

Vertiv Liebert DCD Manuale utente

Westinghouse

Westinghouse GFP Series Manuale utente

Venmar

Venmar KUBIX HRV PLUS Series Manuale utente

Maico

Maico ECR 31 Manuale utente

Sonnenkonig

Sonnenkonig Dinky Manuale utente

S&P

S&P ECOWATT HXBR Manuale utente

Wider

Wider IMP03369BH Manuale utente

Panasonic

Panasonic F-60DHN Manuale utente

Hinkley

Hinkley HIGHLAND Manuale utente

Broan

Broan 766BN Manuale utente

Premium

Premium PFS16022 Istruzioni per il montaggio