Brother HL-L2300D Manuale operativo

Version B

USA/CAN

Using the Documentation A

Please read this guide before attempting to operate the product, or before attempting any

maintenance. Failure to follow these instructions may result in an increased risk of personal injury

or damage to property, including through fire, electrical shock, burns or suffocation. Brother shall

not be liable for damage caused where the product owner has failed to follow the instructions set

out in this guide.

Read all of the instructions. Save them for later reference.

Symbols and conventions

used in the documentation A

The following symbols and conventions are

used throughout the documentation.

WARNING

WARNING indicates a potentially hazardous

situation which, if not avoided, could result in

death or serious injuries.

CAUTION

CAUTION indicates a potentially hazardous

situation which, if not avoided, may result in

minor or moderate injuries.

IMPORTANT

IMPORTANT indicates a potentially

hazardous situation which, if not avoided,

may result in damage to property or loss of

product functionality.

NOTE

NOTE specifies the operating environment,

conditions for installation, or special

conditions of use.

Follow all warnings and instructions marked

on the product.

NOTE

• Not all models are available in all

countries.

• The illustrations in this guide show the

HL-L2340DW and MFC-L2700DW.

Product Safety Guide A

(HL-L2300D / HL-L2305W / HL-L2320D / HL-L2340DW / HL-L2360DW /

HL-L2380DW / DCP-L2520DW / DCP-L2540DW / MFC-L2700DW /

MFC-L2705DW / MFC-L2720DW / MFC-L2740DW)

Electrical Hazard icons alert you to

possible electrical shocks.

Fire Hazard icons alert you to the

possibility of a fire.

Hot Surface icons warn you not to

touch product parts that are hot.

Prohibition icons indicate actions

that must not be performed.

Bold Bold typeface identifies specific

keys on the product’s control

panel or on the computer

screen.

Italics Italicized typeface emphasizes

an important point or refers you

to a related topic.

Courier

New

Text in Courier New font

identifies messages on the

LCD of the product.

Compilation and Publication A

Under the supervision of Brother Industries, Ltd., this manual has been compiled and published,

covering the latest product descriptions and specifications.

The contents of this manual and the specifications of this product are subject to change without

notice.

Brother reserves the right to make changes without notice in the specifications and materials

contained herein and shall not be responsible for any damages (including consequential) caused

by reliance on the materials presented, including but not limited to typographical and other errors

relating to the publication.

Choosing a location A

WARNING

Choose a location where the temperature remains between 50°F and 90°F (10°C and 32°C),

the humidity is between 20% to 80%, and where there is no condensation.

DO NOT expose the product to direct sunlight, excessive heat, open flames, corrosive gasses,

moisture or dust. Doing so may create a risk of an electrical shock, short circuit or fire. It may

also damage the product and/or render it inoperable.

DO NOT place the product near heaters, air conditioners, electrical fans, refrigerators, or water.

Doing so may create the risk of an electrical shock, short circuit or fire, as water may come into

contact with the product (including condensation caused by heating/air conditioning/ventilation

equipment).

DO NOT place the product near chemicals or in a place where chemicals could be spilled on it.

Should chemicals come into contact with the product, there may be a risk of fire or electric

shock. In particular, organic solvents or liquids such as benzene, paint thinner, polish remover,

or deodorizer may melt or dissolve the plastic cover and/or cables, resulting in a risk of fire or

electric shock. These or other chemicals may also cause the product to malfunction or become

discolored.

DO NOT put the product in a location that blocks or obstructs any slot or opening in the product.

These slots and openings are provided for ventilation. Blocking the product’s ventilation could

create a risk of overheating and/or fire.

Instead:

• Keep a minimum gap around the product as shown in the illustration.

• Place the product on a solid level surface.

• DO NOT place this product near or over a radiator or heater.

• DO NOT place this product in a “built-in” installation unless adequate ventilation is provided.

DO install your product near an AC power outlet that is easily accessible. In the event of an

emergency, easy access to the plug and outlet will allow you to shut off power to the product

quickly and completely.

Plastic bags are used in the packing of your product. Plastic bags are not toys. To avoid the

danger of suffocation, keep these bags away from babies and children and dispose of them

properly.

4 in.

(100 mm)

5 in.

(120 mm)

4 in.

(100 mm)

4 in.

(100 mm)

10 in.

(250 mm)

4 in.

(100 mm)

CAUTION

DO NOT place any objects around the product. Such objects block the access to the power

outlet in case of emergency. It is important that the product can be unplugged whenever

needed.

The product may generate odorous gas such as ozone if used for a large volume of printing or

used in a poorly ventilated room for long hours. In addition, the product emits some chemical

substances during the printing. Ensure adequate ventilation for the product to avoid discomfort

or injury.

Avoid placing your product in a busy area. If you must place it in a busy area, ensure that the

product is in a safe location where it cannot be accidentally knocked over, which could cause

injury to you or others and serious damage to the product. Also ensure that cords are secured

so as not to pose a tripping hazard.

DO NOT place heavy objects on the product.

DO NOT place this product on an unstable cart, stand, or table, particularly if children are

expected to be near the product. The product is heavy and may fall, causing injury to you or

others and serious damage to the product. For the products with scanning function, there is an

added risk of injury if the scanner glass should break.

Put your product on a flat, level, stable surface (such as a desk), that is free from vibration and

shocks. Put the product near a telephone wall jack (MFC only) and a standard grounded AC

power outlet.

IMPORTANT

• DO NOT place your product next to devices that contain magnets or generate magnetic fields.

Doing so may interfere with the operation of the product, causing print quality problems.

• DO NOT place your product next to sources of interference, such as speakers or the base units

of non-Brother cordless telephones. Doing so may interfere with the operation of the product's

electronic components.

• DO NOT connect your product to an AC power outlet controlled by wall switches or automatic

timers. DO NOT connect your product to the same circuit as a large appliance or other

equipment that requires a significant amount of electricity to operate (such as an air

conditioner, copier, or shredder). Operating this product in conjunction with other products that

require a significant amount of electricity to operate could disrupt the power supply or create

an overvoltage, tripping your circuit breaker or blowing your fuse. Disruption of the power

supply also may delete information from the product's memory, and repeated cycling of the

power supply can damage the product.

To use the product safely A

Please keep these instructions for later reference and read them before attempting any

maintenance. If you do not follow these safety instructions, there is a possibility of a fire, electrical

shock, burn or suffocation.

WARNING

ELECTRICAL HAZARDS

Failure to follow the warnings in this section may create the risk of an electrical shock. In

addition, you could create an electrical short, which may create the risk of a fire.

There are high voltage electrodes inside the product. Before you access the inside of the

product, including for routine maintenance such as cleaning, make sure you have unplugged the

telephone line cord first (MFC only) and then the power cord from the AC power outlet, as well

as any telephone (RJ-11) (MFC only) or Ethernet (RJ-45) cables (Network models only) from

the product. Never push objects of any kind into this product through cabinet slots, since they

may touch dangerous voltage points or short out parts.

Unplug the power plug regularly to clean it. Use a dry cloth to clean the root of the plug blades

and between the blades. If the power plug is plugged into the outlet over a long period, dust

accumulates around the plug blades, which may cause a short circuit resulting in a fire.

DO NOT handle the plug with wet hands. Doing this might cause an electrical shock.

Always make sure the plug is fully inserted. DO NOT use the product or handle the cord if the

cord has become worn or frayed.

If the product has been dropped or the casing has been damaged, there may be the possibility

of an electric shock. Unplug the product from the AC power outlet and contact Brother

Authorized Service Personnel.

DO NOT allow this product to come into contact with water. This product should not be used

around standing water, including a bath tub, sink, or swimming pool; around appliances

containing water, including a refrigerator; or in a wet basement.

If water, other liquids, or metal objects get inside the product, immediately unplug the product

from the AC power outlet and contact Brother Authorized Service Personnel.

DO NOT dismantle this product. Dismantling this product could cause a fire or electric shock.

DO NOT attempt to service this product yourself. Opening or removing covers may expose you

to dangerous voltage points and other risks and may void your warranty. Refer all servicing to

a Brother Authorized Service Center.

This product should be connected to an AC power source within the range indicated on the

rating label. DO NOT connect it to a DC power source or inverter. If you are not sure what kind

of power source you have, contact a qualified electrician.

Power Cord Safety:

• This product is equipped with a 3-wire grounded plug. This plug will only fit into a grounded

power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, call

your electrician to replace your obsolete outlet. DO NOT attempt to defeat the purpose of the

grounded plug.

• DO NOT pull on the middle of the AC power cord; pulling on the middle may cause the cord

to separate from the plug. Doing this might cause an electrical shock.

• Only use the power cord supplied with this product (for certain models only).

• DO NOT use any undesignated cables (or optional devices). It may cause a fire or injuries.

Installation must be performed properly according to the user's guide.

• This product should be positioned so that nothing pinches or constricts the power cord.

• DO NOT allow anything to rest on the power cord.

• DO NOT place this product where people may step on the cord.

• DO NOT place this product in a position where the cord is stretched or strained, as it may

become worn or frayed.

• DO NOT use the product if the power cord is frayed or damaged. Doing so may cause an

electrical shock or fire.

• Brother strongly recommends that you DO NOT use any type of extension cord.

• DO NOT drop any metallic hardware or any type of liquid on the power plug of the product.

It may cause an electrical shock or a fire.

DO NOT use this product during an electrical storm.

(MFC only)

Use caution when installing or modifying telephone lines. Never touch telephone wires or

terminals that are not insulated unless the telephone line has been unplugged from the wall jack.

Never install telephone wiring during a lightning storm. Never install a telephone wall jack in a

location that is wet or may become wet, for example, near a refrigerator or other appliance that

produces condensation.

DO NOT put a toner cartridge or a toner cartridge and drum unit assembly into a fire. It could

explode, resulting in injuries.

DO NOT use flammable substances, any type of spray, or an organic solvent/liquid containing

alcohol or ammonia to clean the inside or outside of the product. Doing so could cause a fire or

electrical shock. Instead, use only a dry, lint-free cloth.

DO NOT attempt to operate this product when a paper jam or stray pieces of paper are inside

the product. Prolonged contact of paper with the fuser unit could cause a fire.

DO NOT use a vacuum cleaner to clean up scattered toner. Doing this might cause the toner

dust to ignite inside the vacuum cleaner, potentially starting a fire. Please carefully clean the

toner dust with a dry, lint-free soft cloth and dispose of it according to local regulations.

(Models with Wireless LAN function only)

DO NOT use the product near any medical electrical equipment. The radio wave emitted from

the product may affect medical electrical equipment and cause a malfunction, which may result

in a medical accident.

For persons with a pacemaker

The product emits weak electromagnetic waves. Should you feel something is wrong, move

away from the product and consult with a medical doctor immediately.

DO NOT place the following objects on the product. If these objects contact the electrical parts

inside the product, it may cause a fire or electric shock.

• Metal object such as a clip or a staple

• Precious metal such as a necklace or a ring

• Container holding water or liquid such as a glass, a flower vase or a flower pot

HOT SURFACE

After you have just used the product, some internal parts of the product will be extremely hot.

Wait at least 10 minutes for the product to cool down before you touch the internal parts of the

product.

If the product becomes unusually hot, releases smoke, generates any strong smells, or if you

accidentally spill any liquid on it, immediately unplug the product from the AC power outlet.

Contact Brother Authorized Service Personnel.

CAUTION

(Products with scanning function only)

When you move the product, grasp the side handholds that are under the scanner. DO NOT

carry the product by holding it at the bottom. If you do not carry the machine properly, the

machine could slip out of your hands, and injury could result.

(Products with scanning function only)

Some areas of the product can cause injury if covers (shaded) are closed with force. Take care

when placing your hand in the areas shown in the illustrations, and DO NOT close the covers

with force.

(Products with scanning function only)

To prevent injuries, be careful not to put your fingers in the areas shown in the illustrations.

For your safety, unplug the product from the power outlet when not used for a long time.

Altri manuali per HL-L2300D

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Brother Stampante tutto in uno

Brother

Brother MFC-8510DN Manuale utente

Brother

Brother MFC-790CW Manuale utente

Brother

Brother DCP-1510 Manuale utente

Brother

Brother MFC-J6520DW Manuale operativo

Brother

Brother MFC-J6510DW Guida di sicurezza

Brother

Brother MFC-7240 Manuale utente

Brother

Brother DCP-117C Manuale utente

Brother

Brother MFC 6890CDW Manuale utente

Brother

Brother MFC 5490CN - Color Inkjet - All-in-One Manuale utente

Brother

Brother FAX-1840CN Manuale utente

Brother

Brother MFC-8220 Manuale utente

Brother

Brother MFC 7345N - Laser Multifunction Center Manuale utente

Brother

Brother DCP-T300 Istruzioni per il montaggio

Brother

Brother MFC-7360N Manuale utente

Brother

Brother MFC-7420 Manuale utente

Brother

Brother MFC 885CW - Color Inkjet - All-in-One Manuale utente

Brother

Brother MFC-790CW Manuale utente

Brother

Brother Airprint MFC-J460DW Manuale utente

Brother

Brother MFC-J270W Guida utente

Brother

Brother MFC-9*970CDW Manuale operativo e di manutenzione

Brother

Brother Laser MFC-4800 Manuale utente

Brother

Brother MFC-885CW Manuale utente

Brother

Brother Business Smart MFC-J4510dw Manuale utente

Brother

Brother MFC-J432W Manuale utente

Manuali Stampante tutto in uno popolari di altre marche

Triumph Adler

Triumph Adler DC 2016 Manuale

Epson

Epson WorkForce WF-2510 Guida utente

Epson

Epson Stylus Scan 2000 Manuale di installazione e funzionamento

Epson

Epson PictureMate Snap PM 240 Manuale di istruzioni

Konica Minolta

Konica Minolta bizhub C35 Manuale utente

Konica Minolta

Konica Minolta BIZHUB 558 Manuale utente

Lexmark

Lexmark MX710 Series Manuale

Lexmark

Lexmark XC8155 Manuale utente

Lexmark

Lexmark X642E Manuale utente

Sharp

Sharp MX-2310U Guida

Aficio

Aficio 200 Manuale utente

Canon

Canon ImageCLASS 2300 Manuale

Ricoh

Ricoh Pro C900 Manuale utente

Lexmark

Lexmark X925 Manuale utente

Epson

Epson Stylus CX8400 Series Manuale utente

Oce

Oce VarioLink 5022 Manuale utente

Copystar

Copystar CS 4551ci Manuale utente

Konica Minolta

Konica Minolta Magicolor 4650EN Manuale utente