Brother P-TOUCH H110 Manuale utente

English

User’s Guide

H11

GETTING STARTED

Power Supply and Tape Cassette

Open the cassette cover by pressing the

highlighted area at the top end of the machine.

• Make sure you turn the power off when replacing batteries

or tape cassettes.

Insert a tape cassette, making sure it snaps into

place.

• Make sure the end of the tape feeds under the tape guides.

• Use Genuine Brother P-touch TZe tapes with this machine.

Print head

Tape cutter leverCassette cover

Tape exit slot

Toothed Wheel

Cutter's edge

End oftape

Tape guides

With your new Brother P-touch labelling machine, you can create a wide variety of custom, self-adhesive labels. This

machine uses Brother "TZe" tapes from 3.5 mm to 12 mm widths. "TZe" tape cassettes are available in many

colours and sizes. Visit

www.brother.com

for a complete list of tapes that work with your machine.

Read this manual carefully before starting and keep it in a handy place for future reference.

Printed in China

LAK038001

English

User’s Guide

H11

NOTE

When using the optional AC adapter

1. Insert adapter cord into the AC adapter socket at the bottom of the machine.

2. Insert the plug into the nearest standard electrical socket.

For the memory backup feature, use either AAA alkaline batteries (LR03) or Ni-MH batteries (HR03)

together when using the AC adapter.

Insert six new AAA alkaline batteries (LR03) or fully

charged Ni-MH batteries (HR03), making sure their

positive and negative ends point in the correct directions.

Users of alkaline batteries:

Always replace all six batteries at the same time

with brand new ones.

Users of Ni-MH batteries:

Always replace all six batteries at the same time

with fully charged ones.

1Insert the two hooks at the bottom of the

cassette cover into the slots on the

machine.

2Securely close the cassette cover making

sure it snaps into place.

AC adapter socket

NOTE

• The LCD displays one row of 15 characters; however, the text you enter can be up to 80 characters in

length.

• Label length displayed on the LCD may differ slightly from the actual printed label length.

LCD

1. Size

2. Font

3. Cursor

4. Shift

5. Caps

6. Underline/Frame

7. Style

8. Label Length

If a specific label length has

been selected, also appears.

9. Cable

1Turn your machine on.

Supply power using six AAA batteries or the optional AC adapter (AD-24ES/AD-5000ES: For Australia,

New Zealand only), and then press to turn the power on.

2Set the language.

The default setting is [English].

3Set the unit of measurement.

The default setting is [mm].

NOTE

• The machine automatically turns off if no keys are pressed within five minutes.

• To cancel any operation, press .

• After pressing , the machine displays "Accepted" to confirm your settings.

Initial Settings

/[Language] /[English/Español/Français/Hrvatski/Italiano/

Magyar/Melayu/Nederlands/Norsk/Polski/Português/Portug. (BR)/Română/Slovenski/Slovenský/

Suomi/Svenska/Türkçe/ýeština/Dansk/Deutsch] .

/[Unit] /[inch/mm] .

NOTE

• While selecting the settings, press the Space key to revert to the default item.

• Pressing the Preview key displays a generated image of the label, and may differ from the actual label

when printed.

Keyboard

1. Menu key

2. Power key

3. Cursor key: Left (Use with the

Shift key to go to the top of the

text.)

4. Escape key

5. OK key

6. Size key

7. Font key

8. Character key

9. Shift key

10. Caps key

11. Accent key

12. Tape cutter lever

13. Clear key

14. Print key

15. Preview key

16. Cursor key: Right (Use with the

Shift key to go to the end of the

text.)

17. Style key

18. Frame key

19. Cable key

20. Backspace key

21. Enter key

22. Symbol key

23. Space key

GETTING STARTED (Continued)

This function allows you to set the brightness of

the LCD. You can select from five levels of

brightness.

The default setting is [0].

• To change a setting back to default, press the

Space key.

BASIC USAGE

XSwitching Upper-Case/Lower-Case

Press to switch between upper and lower

case text.

Upper-case ( ON) Lower-case ( OFF)

XCreating Two-Line Labels

Move the cursor to where you want to start the

next line and press . Use either 9 mm or 12

mm wide tape for two line printing.

NOTE

• The return symbol ( ) is displayed when you

press the Enter key, indicating you have chosen to

input a second line of text.

XEntering Accented Characters

Press to add an accented character.

• See the table of accented characters included in

this guide.

• To cancel an operation, press .

• The order of accented characters depends on

the selected LCD language.

Contrast

/[LCD contrast]

/[-2/-1/0/+1/+2]

Entering Text

Line 1 Label image

Line 2

- /

Caps

XChanging Label Width

XChanging Label Length

NOTE

• After the label is printed, cut along the printed

dots (:) with scissors so that the label length

matches what is displayed on the LCD.

• If a specific label length has been selected,

also appears in the LCD.

• By pressing the Space key, [Auto] is displayed.

• To change a setting back to default, press the

Space key.

XDeleting Text

NOTE

XPreview

You can preview the text before printing.

• Pressing the Preview key displays a generated

image of the label, and may differ from the

actual label when printed.

• When the LCD cannot display all the text at

once, press /to display the hidden

text.

• Press // to leave the preview

mode.

XFeeding (Tape Feed)

• This function feeds approximately 25 mm of

blank tape.

Entering Text (continued)

/[Width]

/[Normal/x2/x1/2]

Width Normal

× 2

× 1/2

/[Label Length]

/[Auto/30-300 mm]

Press .

• To delete all text and settings or text only,

press

/[Text&Format]/[Text Only]

Printing Labels

/[Feed]

BASIC USAGE (Continued)

XPrinting

• If you need only one copy of the label, press

without selecting the number of copies.

• You can print up to nine copies of each label.

• The number of copies can also be specified by

pressing a number key.

• To cut the label, press the tape cutter lever on

the upper-right corner of the machine after the

message "Please Cut" is displayed. "Please

Cut" is displayed on the screen for two seconds.

• To prevent damage to the tape, do not touch the

cutter lever while the message "Please Wait" is

displayed.

• To remove the backing, fold the label

lengthwise with the text facing inward to expose

the inside edges of the backing. Peel off the

backing one piece at a time and apply.

XUsing Print Options

[Numbering]

You can print a series of up to nine labels at a time

using auto-numbering. Using this feature you can

automatically increase a selected number by one

after each label is printed. The numbers of labels

you can print at one time depend on the initial

number.

Example: To print copies of a label containing a

serial number (0123, 0124 and 0125)

• Select the highest number you want to be

printed when setting the number.

[Mirror]

Example: Follow the instructions below after

entering "J.SMITH" if you want to

Mirror Print "J.SMITH".

• Use clear tape in [Mirror], so you can read the

labels correctly from the opposite side when

attached on glass, windows or other

transparent surfaces.

XSetting Margin ( )

[Full]/[Half]/[Narrow]

For leaving equal margins on both sides of the

text.

NOTE

• The 25 mm piece of tape that is produced prior

to every label cannot be eliminated due to the

construction of the tape mechanism.

However, when you print more than one label

continuously, the subsequent labels can be

printed without the excess tape. (Except for the

full margin setting)

Printing Labels (continued)

[Copies: ] //-

Enter numbers /Move the cursor

to the number you wish to increment

/[Print

Option] [Numbering]

Enter text/characters

[Print Option] /[Mirror]

[Mirror Print?]

/[Margin]

/[Full/Half/Narrow/Chain Print]

ABC ABCABC

4 mm4 mm12 mm 12 mm

25 mm 25 mm

Full Half Narrow

[Chain Print]

Use this setting when printing several labels with

minimum margins.

1. Enter text.

2. Press , then [Copies: ] appears.

3. Press /or enter a number with

number keys to select the number of copies.

4. Press . Printing starts, and then the

message "Feed OK?" appears.

5. Press to enter more text.

6. Clear the text, enter the text for the next label,

and then press .

7. When the message "Feed OK?" appears after

the last label is printed, press .

8. After the tape is fed, press the cutter lever to

cut off the chain of labels.

NOTE

• When you set [Chain Print], feed the tape before

using the cutter otherwise a part of the text may

be cut off.

• When you set [Half] or [Narrow], the displayed

label length is the length from the printed dots

( ) to the end of the label. Cut along the printed

dots (:) with scissors.

• To print more than one copy of a label with

minimum margins, set the margin to [Narrow].

• Do not pull the tape since this may damage the

tape cassette.

You can save up to 15 labels and recall them for

printing at a later date. A maximum of 80

characters can be saved per file, a maximum of

1200 characters can be saved in total memory.

You can also edit and overwrite the stored labels.

XSave

XPrint

XOpen

NOTE

• You can also enter the File menu by pressing

• If you try to store a label when there is already a

label stored to that number, a message

“Overwrite OK?” appears. Press to save

your new label. Press to cancel.

• You must type text before starting the save

function.

Printing Labels (continued)

LCD Label image

Full

Half

Narrow

67 mm

ABC

41 mm

ABC

25 mm

ABC

Saving Label Files

Enter Text /[File]

/[Save] /

/[File]

/[Print] /

[Copies: ]

//-

/[File]

/[Open]

USING TEMPLATES

This function allows you to create two types of

cable labels.

Example: Cable Label 1

NOTE

• Label length is auto only. You cannot set label

length.

• To clear all text and settings or text only, press

/[Text&Format]/[Text Only]

• You can set the Font, Size, Style and Frame

while entering texts.

• To exit templates and return to the text input

screen, do one of the following:

a) Press .

b) Press /to select [Exit], and then press

when "Print" appears.

• To preview labels, press the Preview key when

[Print] is displayed on the LCD.

• You cannot save labels created using templates

to memory.

This function allows you to create various labels

using the built-in templates. See the Text Label

templates table included in this guide.

XExample:

[Template that includes one

repeated graphic]

NOTE

• Press the Space key to return to the initial

setting for "Label Length" mode. The initial

setting is [Auto].

• To clear the text, move the cursor to the right side

where you want to clear, and then press .

• To clear all text, press , then “All Clear”

appears. Press to clear. Press to cancel.

• You cannot set the Font, Size, Style and Frame

while entering text.

• If you set the longer label length than the default

([Auto]), the text label is printed repeatedly

within the set length. The text label may not be

fully printed depending on the set length.

• The available label length setting changes

depending on the number of texts you entered.

• These templates are available when using

12 mm wide tape cassettes.

• You cannot edit the templates.

Cable Label

Cable Label template 1 :

Cable Label template 2 :

[Select Layout] /

[Input Text] Enter

text[Print]

[Copies: ] //-

Text Label

/[Decorative]

[Select Category] /[Text]

[Select Design] /

[Input Text]

[Set Label Length]

[Auto/30-

999 mm]

[Print] [Copies: ]

Indice

Altri manuali Brother Etichettatrice

Brother

Brother PT-P900W Istruzioni per il montaggio

Brother

Brother P-touch H200 Manuale utente

Brother

Brother QL-1050 Manuale utente

Brother

Brother PT 2300 - P-Touch 2300 Thermal Transfer... Manuale utente

Brother

Brother P-touch PT-80 Manuale utente

Brother

Brother P-touch D450 Manuale utente

Brother

Brother P-Touch PT-90 Manuale utente

Brother

Brother P-touch PT-2610 Manuale utente

Brother

Brother QL-500W Manuale utente

Brother

Brother QL-1050 Manuale utente

Brother

Brother PT-P750W Manuale utente

Brother

Brother VC-500W Manuale utente

Brother

Brother P-touch E550W Manuale utente

Brother

Brother P-touch PT-D400 Manuale utente

Brother

Brother P-Touch PT-M95 Manuale utente

Brother

Brother P-touch 1280 Manuale utente

Brother

Brother P-Touch PTE300VP Manuale utente

Brother

Brother P300BT Manuale utente

Brother

Brother PT-D460BT Manuale utente

Brother

Brother P-Touch PT-D200 Manuale del proprietario

Brother

Brother P-touch RL-700S Manuale utente

Brother

Brother P-touch PT-1290 Manuale utente

Brother

Brother P-touch Embelish PT-D215e Manuale utente

Brother

Brother P-Touch 2300 Manuale utente

Manuali Etichettatrice popolari di altre marche

newell

newell Dymo LabelManager 210D Manuale utente

U-Line

U-Line BROTHER H-8754 Manuale utente

Tharo Systems

Tharo Systems H-435+ Manuale utente

Godex

Godex RT700 SERIES Manuale utente

ID Technology

ID Technology 252 Manuale utente

Labelmate

Labelmate MC-11 Manuale utente

CAB

CAB XD4M/300 Manuale utente

Avery Dennison

Avery Dennison Pathfinder 6057 Manuale di servizio

TSC

TSC PEX1000 Series Manuale utente

Adkins

Adkins Label Master Manuale utente

Epson

Epson LabelWorks LW-400 Manuale utente

Primera

Primera 510212 Manuale utente

Brady

Brady BradyPrinter S3100 Manuale utente

DuraLabel

DuraLabel LabPRO Manuale utente

Novexx Solutions

Novexx Solutions XLP 604 Manuale utente

Epson

Epson LabelWorks LW-400 Manuale utente

Dymo

Dymo LabelManager 420P Manuale utente

Epson

Epson LW-PX400 Manuale utente