Brother GT-541 Foglio di istruzioni

GT541 INSTALL PROCEDURES

Machine Weight 220 lbs.

 Crate is shrunk wrapped and strapped

1. Remove wrap and straps

2. Remove Top - first remove clips that holds top in place.

3. Remove card board internal sidings

• Remove thin cardboard top

• Remove accessory box

• Thin boards go on left and right sides of machine

• Thick boards go on Front and Back side of machine

• Remove box sides – surrounding of crate – first remove clips that hold

bottom in place.

• Remove plastic wrap from machine

4. Unscrew 4 screws from 2x2’s that secures machines to pallet.

• Lift machine to table top—make sure that table top is strong enough to

hold machine for long period of time, machines weight is 220 lbs so if

table is not strong enough can warp top or break table in long term.

5. Remove 2x2’s from bottom of machine when on tabletop.

• Replace screws back on machine after 2x2’s have been removed. (Optional)

 Install/Training

Follow Install Checklist for set-up

1. Inspect machine and room conditions

2. Level Machine (Pull platen out very slowly for level placement)

3. Open cover - Remove cardboard holder(s) from tubes and maintenance

station.

4. Lower rubber caps by rotating gear on the right side of the maintenance

station, slide head carriage to the center of the machine (this will give you

more room for installing heads)

5. Use jig to make sure maintenance station has not shifted during shipping (see

maintenance station adjustment)

6. Install heads

• Use Rubber Gloves

• First 20 machines will come with heads labeled for each color cartridge.

• Hold heads from metal bracket when installing.

• Careful not to drop heads

 Clip heads in place after its station in the carriage

 Install Ribbon Cable (silver strips to the front)

 Install tube

 Remove protector plate

7. Install waste cartridge (Remove shipping cardboard insert from tray and

install cartridge from accessories box.

8. Install ink cartridges (Store filter cartridges on printer shelf)

9. Connect power cable – Power up

10. Introduce of Ink

• Go into advance test mode to initialize inks

• Press ▼to highlight Version

• Press ▼▲ and cancel in this sequence

• Press ▼to Initial Cleaning and then OK

• When initialize is done back out with enter key or cancel key.

11. Install back cover while the machine is introducing ink; verify customer has

received all other accessories, verify the curing process the customer will be

using is what we recommend.

12. Test Print

• Place 8.5x11 sheet of paper on lower right corner closest to you

• Verify platen height is set to A position

• Press one of the menu button to get into the menu screen

• Press ▼to highlight Test Print

• Press OK

• Select Nozzle Check

• Press OK

• Watch print

Note: Continue to test print until you get all nozzles to fire, you will

need to purge during this process, follow flow chart from your service

manual for reference.

• Turn off printer

13. Install printer driver (File Output) to customers PC without the printer

connected to PC (follow on screen steps).

14. Connect USB cable to PC and Printer and power up the printer, the

installation of the printer driver will auto start (follow on screen steps).

15. Run GT Service Tool from your USB stick (read each screen carefully do not

move forward until the current task is complete)

• Set Printer Date and Time

• Heads Firing Adjustment (To calibrate all heads)

At this point the left side of your installation form should be complete, you are ready to

customize the customer software application (color management, page setup, color

palettes (see Cookbook for reference)) and start training.

Altri manuali per GT-541

Indice

Altri manuali Brother Stampante

Brother

Brother HL-660 Series Manuale utente

Brother

Brother HL-1118 Manuale operativo

Brother

Brother HL-L8260CDW Manuale utente

Brother

Brother PCL Manuale del prodotto

Brother

Brother GTX pro Manuale utente

Brother

Brother MFC-J4335DW Manuale utente

Brother

Brother DCP 110c - Color Flatbed Multi-Function... Guida rapida

Brother

Brother GT-541 Manuale utente

Brother

Brother MFC-J775DW Manuale utente

Brother

Brother MFC-L2700D Manuale operativo e di manutenzione

Brother

Brother HL-L8250CDN Manuale operativo

Brother

Brother HL-5470DW Manuale utente

Brother

Brother DCP-1510 Manuale utente

Brother

Brother PocketJet PJ673-K Manuale operativo

Brother

Brother HL HL-1060 Manuale utente

Brother

Brother P-touch 2430PC Aggiornamento firmware

Brother

Brother HL-2600CN Series Manuale utente

Brother

Brother LASER PRINTER HL-2140 Manuale utente

Brother

Brother MFC-T920DW Manuale utente

Brother

Brother HL-2070N Manuale utente

Brother

Brother TD-2120N TD-2130N TD-2120NW Manuale utente

Brother

Brother 1470N - HL B/W Laser Printer Manuale utente

Brother

Brother MFC-1813 Manuale operativo

Brother

Brother HL-1270N Manuale utente

Manuali Stampante popolari di altre marche

Lexmark

Lexmark 1400 Series Manuale

Canon

Canon i70 Series Manuale utente

Evolis

Evolis Elypso Manuale utente

Kyocera

Kyocera FS-9530DN Manuale utente

Canon

Canon LASER SHOT LBP-1210 Manuale utente

Samsung

Samsung BIXOLON SRP-350plusF Manuale utente

Canon

Canon PIXMA PRO-1 Series Manuale utente

Canon

Canon PIXMA G3560 Guida all'installazione

Dell

Dell Color Laser Printer 2130cn Manuale utente

Tektronix

Tektronix Phaser 840 Manuale utente

Epson

Epson ET-7750 Istruzioni operative

Canon

Canon CLBR 460ps Manuale utente

Eltron

Eltron P210 Guide Manuale utente

Ricoh

Ricoh MD-P1 Manuale utente

Epson

Epson SC-F7100 series Manuale utente

Epson

Epson Stylus C40UX Manuale utente

Canon

Canon imagePASS-A2 Manuale utente

Canon

Canon S820D Manuale utente