Brother GTX Manuale utente

Altri manuali per GTX

2

Altri manuali Brother Stampante

Brother

Brother MFC-9330CDW Manuale utente

Brother

Brother SC-2000 Manuale utente

Brother

Brother HL-1110 Manuale utente

Brother

Brother HL-1670N Manuale utente

Brother

Brother HL-3070CW Guida all'installazione

Brother

Brother DCP-L2600D Manuale utente

Brother

Brother GT-782 Manuale utente

Brother

Brother HL-5350DN Manuale utente

Brother

Brother HL-5030 Manuale utente

Brother

Brother HL-5040 Manuale utente

Brother

Brother m-PRINT MW-100 Manuale utente

Brother

Brother m-PRINT MW-100 Manuale utente

Brother

Brother DCP-J4120DW Manuale operativo

Brother

Brother DCP-365CN Manuale utente

Brother

Brother HL-720 Manuale utente

Brother

Brother DCP-J1800DW Manuale tecnico

Brother

Brother MP-21 Manuale utente

Brother

Brother HL-L2380DW Manuale utente

Brother

Brother P-touch Embellish ELITE PT-P715eBT Manuale utente

Brother

Brother HL-1870N Istruzioni per il montaggio

Brother

Brother HL-1660e Series Manuale utente

Brother

Brother dcp 9020 cdn Manuale utente

Brother

Brother TD-2120N TD-2130N TD-2120NW Manuale utente

Brother

Brother TD-4520DN Manuale utente

Manuali Stampante popolari di altre marche

Lexmark

Lexmark 1400 Series Manuale

Canon

Canon i70 Series Manuale utente

Evolis

Evolis Elypso Manuale utente

Kyocera

Kyocera FS-9530DN Manuale utente

Canon

Canon LASER SHOT LBP-1210 Manuale utente

Samsung

Samsung BIXOLON SRP-350plusF Manuale utente

Canon

Canon PIXMA PRO-1 Series Manuale utente

Canon

Canon PIXMA G3560 Guida all'installazione

Dell

Dell Color Laser Printer 2130cn Manuale utente

Tektronix

Tektronix Phaser 840 Manuale utente

Epson

Epson ET-7750 Istruzioni operative

Canon

Canon CLBR 460ps Manuale utente

Eltron

Eltron P210 Guide Manuale utente

Ricoh

Ricoh MD-P1 Manuale utente

Epson

Epson SC-F7100 series Manuale utente

Epson

Epson Stylus C40UX Manuale utente

Canon

Canon imagePASS-A2 Manuale utente

Canon

Canon S820D Manuale utente

brother

UNCRATING:

Step by Step Photo

Instructions (Including

Using a Move Kit)

Step 1

2

•After cutting and removing the strapping

material.

•Remove the top cover of the crate.

Step 2

3

•Remove the side paneling cardboard from

each side of the crate.

Step 3

•Remove the front and back paneling from

the crate.

•After removing the paneling; remove any

pieces of cardboard inserts with the

exception of the three items at the front of

the printer.

•Only empty cardboard inserts are to be

removed like the ones indicated here in

the photo to the left.

KEEP THESE

DISPOSE OF THIS TYPE OF INSERT

4

Step 4

•Remove the platen box from the crate. It is

located at the front right of the printer on the

crate. Also indicated in the top photo here.

•NOTE: Do not dispose of this box it contains

the platen for the printer.

•Remove the Accessories box from the crate

located at the front left of the printer.

•Store this item for the installing technician

•NOTE: Do not dispose of this box it contains

the print heads for the printer and other

needed items for setup

5

Step 5

KEEP

DISPOSE OF

•Remove the large cardboard that has the Setup

Manual attached to it.

•Dispose of this piece of cardboard and keep the

manual.

•In total the three items in the bottom photo should

now be available for a technician at the time of setup.

Do not open or dispose of the boxes.

•If you WILL NOT be going through doorways less

than 42” wide then you may stop here. If you WILL

be going through smaller doorways and a move kit

was sent with the printer then proceed to the next

step.

6

STOP

Step 6

•Make a rubber mallet ready for the next

step. (Note: there are other ways to

remove the items in the upcoming steps

without the rubber mallet however this is a

recommended item)

20

Step 7

8

•Take the hammer and tap the two back

supports previously indicated until they come

loose from the glue holding them.

•The printer will still remain raised as it rests on

several other cardboard supports.

•You can now dispose of the two supports as

well once removed.

Step 8

9

•With the hammer take and knock down the

cardboard corner or slit with boxcutter.

•Do this for both corners at the back of the

printer as shown.

Step 9

•Ready the move kit: portable trolley and ratchet strap.

•With the move kit ready mount the trolley in the

manner shown

10