Brother BAS-416 Manuale utente

9/1/05 1

Perform all maintenance with the machine OFF

Daily Maintenance

Cleaning Oiling

Rotary hook

1. Open bobbin case cover and remove bobbin case.

Use brush to remove lint build up in and around

rotary hook. Compressed air may also be used.

2. Insert bobbin case in to rotary hook. Make sure

bobbin thread is not over 2 inches long. Close

bobbin case cover.

Rotary hook

1. Rotate the pulley or degree wheel backwards so

that 50 degrees is at the top.

2. Open the bobbin case cover.

Place a small drop of

oil on the raceway as indicated by the arrow. Oil

rotary hook every 3-4 hours of operation.

3. Close bobbin case cover.

4. Rotate pulley in the direction of the arrow or

forward to stop position, 100 degrees.

For Technical Assistance Please Call Toll Free

1-877-4BROTHER

Email: tsupport@brother.com

Website: http://www.brother-usa.com/industembroidery/tech_down.aspx

S-

-4

E-

-9

9/1/05 2

Weekly Maintenance

Oiling

Needle Bars

1. Remove the front plate that has the “BROTHER”

logo on it by removing one screw and loosening

the other. The plate will now slide off to the side.

2. Oil each needle bar as shown in the picture by

placing a small drop of oil on each needle bar in

the two locations.

3. Replace cover.

Oil Tanks

1. Fill both oil tanks with fresh oil to ½ full by inserting

oil bottle through the rubber dust plugs.

Note: Oil may run out in the front tank after one or

two hours of operation. This is normal. A part that

can keep extra oil is incorporated into the machine

front oil tank, so that even with no oil tank, oil can

be supplied to the machine.

For Technical Assistance Please Call Toll Free

1-877-4BROTHER

Email: tsupport@brother.com

Website: http://www.brother-usa.com/industembroidery/tech_down.aspx

S-

-4

E-

-9

9/1/05 3

Monthly Maintenance

Cleaning

Knives

1. Remove the two screws and remove the needle

plate.

2. Clean any thread and lint around the moving and

fixed knive with a brush or compressed air

3. Re-install needle plate.

Control Box

1. Use a brush to clean fan inlet and vents on sides

control box.

For Technical Assistance Please Call Toll Free

1-877-4BROTHER

Email: tsupport@brother.com

Website: http://www.brother-usa.com/industembroidery/tech_down.aspx

S-

-4

E-

-9

9/1/05 4

6 Month Maintenance

Greasing

Color Change Assembly

1. Color change the machine to the furthest needle

to the left. Apply black grease (BR2) to the

groove of the cam and bevel gears. Apply grease

lightly since excess grease may contaminate the

color change sensor on some models.

2. Apply black grease (BR2) to the roller bearings.

Apply grease lightly since excess grease may

contaminate the color change sensor on some

models. Color change the machine to needle 1 to

get to the last 3 to 4 roller bearings on the other

side.

Color Change Linear Rail

1. Color change the machine to needle 1. Apply white

grease (30) to the two grooves on the left side of

the linear rail. Color change the machine to the

furthest needle to the left to get to the other side of

the linear rail and grease on that side as well.

For Technical Assistance Please Call Toll Free

1-877-4BROTHER

Email: tsupport@brother.com

Website: http://www.brother-usa.com/industembroidery/tech_down.aspx

S-

-4

E-

-9

Knob for changing colors manually. Some

models will be on the other side.

9/1/05 5

6 Month Maintenance

Greasing

X Linear Rail

1. Looking up underneath the pantograph you will

see the X linear rail.

2. Apply white grease (30) to the two grooves of the

linear rail its entire length. This will be made

easier by

slowly

moving the pantograph all the

way to the right to grease the left side and vice

versa for the right side.

Y Linear Rails

1. Push the pantograph

slowly

to the back. Apply

white grease (30) to the two grooves of the linear

rails on boththe left and right side of the machine.

2. Push the pantograph

slowly

to the front. Apply

white grease (30) to the two grooves of the linear

rails on boththe left and right side of the machine.

For Technical Assistance Please Call Toll Free

1-877-4BROTHER

Email: tsupport@brother.com

Website: http://www.brother-usa.com/industembroidery/tech_down.aspx

S-

-4

E-

-9

9/1/05 6

6 Month Maintenance

Greasing Oiling

Presser Foot Assembly

1. Color change the machine to needle number 1.

Apply black grease (BR2) to the grooves of the

presser foot guide plate for the guide bracket and

retracting lever as indicated by the arrows.

X sensor eccentric bushing

1. Remove the 8 screws holding on the cover and

remove.

2. Lubricate eccentric bushing with a few drops of oil

to the slot as indicated by the arrow.

3. Install the cover.

Note: Make sure that the wires that run up to the

control panel through the right had side of the cover are

installed into the notch for them in the cover and not

pinched by the cover.

For Technical Assistance Please Call Toll Free

1-877-4BROTHER

Email: tsupport@brother.com

Website: http://www.brother-usa.com/industembroidery/tech_down.aspx

S-

-4

E-

-9

Altri manuali per BAS-416

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Brother Macchina da cucire

Brother

Brother BE-1204C Manuale utente

Brother

Brother DB2-B797 Manuale utente

Brother

Brother Computerized Sewing Machine Manuale utente

Brother

Brother DB2-DD7100 Manuale utente

Brother

Brother KE-484C Manuale utente

Brother

Brother Sewing Machine Manuale utente

Brother

Brother XL711 Istruzioni operative

Brother

Brother PE500 Guida all'installazione

Brother

Brother PR-600C II Manuale utente

Brother

Brother Innov-is 1250D Manuale utente

Brother

Brother RH-9820 Manuale utente

Brother

Brother Innov-is NV6000D Manuale utente

Brother

Brother Innov-i-s 80 Guida all'installazione

Brother

Brother Pacesetter PS-21 Manuale utente

Brother

Brother HE-800A Manuale utente

Brother

Brother Entrepreneur W PR680W Manuale utente

Brother

Brother BAS-326G PS Manuale utente

Brother

Brother LK3-B430 Manuale utente

Brother

Brother JS60 Manuale utente

Brother

Brother BAS-341E Manuale utente

Brother

Brother XL-5600 Guida all'installazione

Brother

Brother DB2-B771A Manuale utente

Brother

Brother PE-190D Manuale utente

Brother

Brother 885-V14 Manuale utente

Manuali Macchina da cucire popolari di altre marche

Riccar

Riccar RL634DE Manuale utente

Singer

Singer 2517 Manuale utente

Pfaff

Pfaff 3307-1 SERIES Manuale utente

Janome

Janome Quilt Maker Pro 18 VERSA Manuale utente

Siruba

Siruba C007JP Manuale utente

Husqvarna Viking

Husqvarna Viking Designer SE Manuale utente

Singer

Singer 148-5 Manuale utente

IKEA

IKEA SY Manuale utente

Pfaff

Pfaff 571 Manuale utente

Singer

Singer 15-91 Manuale utente

Pegasus

Pegasus WT100 Series Manuale utente

Reliable

Reliable 7100DB Manuale utente

Pfaff

Pfaff 937 Manuale utente

Singer

Singer 6038 Manuale utente

Singer

Singer 413K Manuale utente

Pfaff

Pfaff 1471 E1 Manuale utente

Kenmore

Kenmore 16677 - Serger Sewing Machine Manuale utente

HIGHLEAD

HIGHLEAD GC2008-M Manuale utente