BT GRAPHITE 2100 Manuale utente
User Guide
BT Graphite 2100
Think before
you print!
This new interactive user guide lets
you navigate easily through the pages
and allows you to be directed straight
to any websites or email addresses
that are referenced.
Simply hover the cursor over the page
number, website or email reference
and click when the icon changes
to the icon.
2
If you experience any problems, please call the Helpline on Freephone 0808 100 6556* or visit www.bt.com/producthelp
Got everything?
• BT Graphite 2100 handset
• BT Graphite 2100 base
• Battery compartment cover
(already tted)
• 2 x AAA NiMH 550mAh
rechargeable batteries
(already in handset)
• Mains power adaptor
(Item code: 052299)
• Telephone line cord (pre-installed)
If you have purchased a BT Graphite
2100 multiple pack you will also have
the following for each handset:
• BT Graphite 2100 handset
• BT Graphite 2100 charger
• Battery compartment cover
(already tted)
• 2 x AAA NiMH 550mAh
rechargeable batteries
(already in handset)
• Mains power adaptor
(Item code: 052300)
This User Guide provides you with all the
information you need to get the most from
your phone.
You must set up your phone before you can
use it. This doesn’t take long and it is easy
to do. Just follow the simple instructions on
the next few pages.
Need help?
If you have any problems setting up or using your BT Graphite
2100 please call our free Helpline on 0808 100 6556*.
Our dedicated advisors are more likely to be able to help you
than the retailer where you made your purchase.
Alternatively, you may nd the answer in ‘Help’ at the back of this
guide or online at www.bt.com/producthelp
IMPORTANT
Only use the power adaptor and telephone line cord supplied,
or this product may not work.
* Calls to the Helpline made from within the UK mainland network are free.
Mobile and International call costs may vary.
3
If you experience any problems, please call the Helpline on Freephone 0808 100 6556* or visit www.bt.com/producthelp
In this guide
Getting started
Location 5
Setting up 5
BT Graphite 2100 multipack users only 6
Set the date and time 7
Getting to know your phone
Handset buttons 8
Standby screen 9
Handset display icons 9
Navigating the menus 10
Menu map 11
Base 12
Using your phone
Switch the handset on/off 13
Make a call 13
Preparatory dialling 13
End a call 13
Receiving calls 13
Chain dialling 14
Dial a chain number 14
Secrecy / Mute 14
Adjusting the earpiece/handsfree volume 14
Make a handsfree call 14
Answer a call handsfree 15
Switch to handsfree during a call 15
Redial a number 15
Copy a redial number to the phonebook 15
Delete a number from the redial list 16
Delete the entire redial list 16
Keypad lock 16
Paging (nd a handset) 16
Using the phonebook 17
Add an entry in the phonebook 17
View and dial entries in the phonebook 17
Edit an entry in the phonebook 18
Delete an entry in the phonebook 18
Delete entire phonebook 18
Internal calls 18
Make an internal call 19
Transfer an external call 19
3 Way call 19
Settings
Handset and base ringer volume 20
Handset and base ringer melody 20
Keypad beep on / off 20
Handset name 21
Auto answer 21
Clock and alarm 21
Set the alarm 21
Select alarm clock melody 22
Change alarm time 22
4
If you experience any problems, please call the Helpline on Freephone 0808 100 6556* or visit www.bt.com/producthelp
Caller Display and the calls list
Caller Display 23
Calls list 23
View the Calls list 24
Dial a number in the Calls list 24
Copy a number from the Calls list
to the phonebook 24
Delete an entry in the Calls list 24
Delete the entire Calls list 24
BT Network Services
Pre-stored BT service numbers 25
Open and dial from the BT services menu 25
Voicemail 25
To dial your voicemail 25
To set up or edit your voicemail number 26
Call Divert 26
Set-up or edit a Call Divert number 26
Activate/deactivate a Call Divert number 26
Call Waiting 27
To use Call Waiting 27
Activate/deactivate Call Waiting 27
Ring Back Off 28
Withhold ID 28
Additional handsets
Register a new BT Graphite 2100 handset
to your BT Graphite 2100 base 29
Register a different manufacturer’s handset
to your BT Graphite 2100 base 29
De-register a handset 30
Change master PIN 30
Reset to default 30
Help 31
General information
Replace the handset batteries 34
Safety information 34
Cleaning 35
Environmental 35
Product disposal instructions 36
Guarantee 36
Technical information 37
R&TTE 38
Declaration of Conformance 38
Connecting to a switchboard 38
Inserting a pause 38
Recall (R) 38
User Guide formats 38
5
If you experience any problems, please call the Helpline on Freephone 0808 100 6556* or visit www.bt.com/producthelp
WARNING
Do not place your BT Graphite 2100
in the bathroom or other humid
areas.
Handset range
The BT Graphite 2100 has a range of
300 metres outdoors when there is a
clear line of sight between the base
and the handset. Any obstruction
between the base and handset will
reduce the range signicantly.
With the base indoors and handset
either indoors or outdoors, the range
will normally be up to 50 metres.
Thick stone walls can severely affect
the range.
Signal strength
The icon on your handset display
indicates when you are in range of
the base. When it ashes and you
hear a warning beep, you are out of
range and will need to move closer to
the base.
IMPORTANT
Do not connect the telephone line to
the telephone line wall socket until
the handset is fully charged.
The base station should be
plugged into the mains power
socket at all times.
Getting started
Location
You need to place your BT Graphite 2100 base within 3 metres of
a mains power socket and 2 metres of the telephone wall socket
so that the cables will reach.
Make sure it is at least 1 metre away from other electrical
appliances to avoid interference.
Your BT Graphite 2100 works by sending radio signals between
the handset and base. The strength of the signal depends on
where you position the base. Putting it as high as possible can
help to provide the best signal.
Setting up
1. Plug the mains power adaptor (item code 052299) into the
power socket marked on the back of the base and secure
the cable behind the retaining clip. Plug the other end into the
mains power wall socket and switch on. The base will come on
and beep.
Telephone line cord
(pre-installed).
Mains power adaptor.
Cable
retaining
clip
6
If you experience any problems, please call the Helpline on Freephone 0808 100 6556* or visit www.bt.com/producthelp
WARNING
Never use non-rechargeable
batteries. Only use the approved
batteries. Using unapproved batteries
will invalidate your guarantee and
may damage the telephone.
Talk/Standby time
Under ideal conditions, the handset
batteries should give up to 10 hours
talk time or 100 hours standby on a
single charge. (This does not mean
you can unplug the base or leave
the handset for this length of time
without charge).
Please note that new NiMH
rechargeable batteries do not reach
full capacity until they have been in
normal use for several days.
Battery low warning
If the icon is ashing in the display
and you hear a warning beep every
minute during a call, you will need
to recharge your handset before you
can use it.
Battery performance
To keep the batteries in the best
condition, leave the handset off the
base for a few hours at a time.
Running the batteries right down at
least once a week will help them last
as long as possible.
After charging your handset for the
rst time, subsequent charging time
for the batteries is approximately
6–8 hours.
The charge capacity of rechargeable
batteries will reduce with time as they
wear out, thus reducing the talk/
standby time. Eventually they will
need replacing. For details on how to
obtain spare batteries, call the
BT Graphite 2100 Helpline on
0808 100 6556*.
2. Remove the protective lm from the handset screen and
activate the batteries by pulling the plastic tab away from the
back of the handset.
Rechargeable batteries
already fitted
Remove this tab
and charge batteries
for 24 hours before use.
3. Place the handset on the base to charge. It will beep when
placed in and the battery icon on the handset will ash
to indicate charging. You should let the batteries charge
continuously for at least 24 hours. The batteries and case may
become warm during charging, this is normal.
The main handset is pre-registered to the base as Handset 1.
This is shown on the display. When the handset is fully charged
the display will show .
4. After 24 hours plug the telephone line cord into the telephone
wall socket.
Note: If you ever need to remove the batteries, simply slide open
the battery compartment cover and using the nger holes grip
the batteries and pull them out.
BT Graphite 2100 multipack users only:
If you have purchased a BT Graphite 2100 multiple pack, you will
need to prepare any additional handsets and chargers for use.
Place each BT Graphite 2100 charger within reach of a mains
power wall socket.
7
If you experience any problems, please call the Helpline on Freephone 0808 100 6556* or visit www.bt.com/producthelp
For each additional handset and charger:
1. Plug the mains power adaptor (item code 052300) into the
power socket on the back of the charger and secure the cable
behind the retaining clip. Plug the other end into the mains
power wall socket and switch the power on.
2. Remove the protective lm from the handset screen and
activate the batteries by pulling the plastic tab away from
the back of the handset.
The display will show the handset number, 2, to show it is
registered to the base.
3. Place the handset on the charger. It will beep when placed
in and the battery icon on the handset will ash to indicate
charging. You should let the batteries charge continuously for
at least 24 hours.
Any additional handsets supplied as part of a multipack
are pre-registered to the base. So, once charged, are ready
for use.
Set the date and time
1. Press
Menu
, scroll
Calls
Redial
to CLOCK/ALARM and press
Menu
.
2. DATE/TIME is displayed. Press
Menu
.
3. Use the keypad to enter the date in the format (DD/MM/YY),
e.g. 12/08/10 for 12th August 2010. If you make a mistake
press
Secrecy
to delete.
4. Press
Menu
. Use the keypad to enter the time in the 24 hour
format (HH:MM), e.g, 17:25 for 5.25pm.
5. Press
Menu
to conrm.
Your BT Graphite 2100 is now ready for use.
Mains power adaptor.
Cable
retaining
clip
8
If you experience any problems, please call the Helpline on Freephone 0808 100 6556* or visit www.bt.com/producthelp
Getting to know your phone
Calls
Redial
Secrecy
Menu
C
o
n
f
Handset buttons
Phonebook
Press to open the phonebook,
page 17.
Redial / Volume +
Press to open the redial list and scroll
back through redial numbers,
page 15.
Press to raise the volume during
a call, page 14.
Menu / Left soft key
Press to open the menu, page 10.
Press to select menu options.
Talk
Press to make and receive calls,
page 13.
During a call, press to switch
handsfree loudspeaker on and off.
Calls list / Vol -
Press to open and scroll forward
through the Calls list, page 24.
Press to lower the volume
during a call, page 14.
Press to add a space when
entering text.
C
o
n
f
/ Keypad lock
Press and hold to lock/unlock
the keypad to prevent accidental
dialling, page 16.
R
Recall – used with switchboard
services and certain
BT Calling Features.
Right Soft key/Secrecy/Display
date & time /Clear/Back
During a call, mutes your voice
so your caller cannot hear you,
page 14.
In standby, press and hold to display
the date and time, press and hold
again to display the handset
name again.
Press to return to the previous menu.
Use to delete characters in the
phonebook and calls lists.
End Call/Handset on/off
Press to end a call.
Press and hold for about 3 seconds
to switch the handset off and on,
page 13.
/Ringer
Press and hold to turn the
ringer on/off.
Selects name/number or time/date
display in the Calls list.
Int
Use to make internal calls and transfer
calls to other handsets registered to
the base, page 19.
Press and hold to insert a pause in the
number to be dialled.
9
If you experience any problems, please call the Helpline on Freephone 0808 100 6556* or visit www.bt.com/producthelp
Standby screen
HANDSET 1
Internal Call
Indicates signal link.
Flashes when handset is not registered
or is out of range of the base.
Displayed when on a call.
Flashes when there is an incoming call.
Handsfree speaker in use.
Phonebook list open.
Indicates there are new number(s)
in the Calls list*.
Fully charged – the 3 bars will all be on.
Medium charge – 2 bars will be on.
Low charge – rst bar will be on.
Empty.
Displayed when alarm has been set.
Indicates the keylock is switched on.
Displayed when handset ringer is
set to off.
Indicates more options are available,
by scrolling up or down.
Handset display icons
Handset name Handset number
Menu
Use with Left soft key
to open main menu
and conrm options
Clear
Use with Right
soft key to clear
characters in entry
mode and mute the
microphone.
Back
Use with Right soft key to
return to previous menu or
cancel current action
* This feature requires subscription to your network provider’s Caller Display service.
A fee may be payable.
Internal call
Flashes to indicate an internal
call is being made.
On when an internal
call is in progress.
10
If you experience any problems, please call the Helpline on Freephone 0808 100 6556* or visit www.bt.com/producthelp
Navigating the menus
Your BT Graphite 2100 handset features an easy to use menu system.
Have a look at the menu map on the next page.
When the handset is switched on and in standby mode:
Press
Menu
to enter the main menu.
Press
Calls
Redial
or
Calls
Redial
to scroll through the menu options.
Calls
Redial
Secrecy
Menu
C
o
n
f
When you reach the end of the list, the rst option is displayed again.
To select a displayed option, press
Menu
.
To exit a menu and return to the previous menu display, press
Secrecy
.
If no buttons are pressed for more than 30 seconds the display will return to the standby screen.
Left soft key – used with icon displayed above the key.
Right soft key – used with icon displayed above the key.
Up and Down keys
Altri manuali per GRAPHITE 2100
1
Indice
Altri manuali BT Telefono senza fili
BT
BT Graphite 2500 Manuale utente
BT
BT QUARTET 3500 Manuale utente
BT
BT DIVERSE 6250 Manuale utente
BT
BT BT DIVERSE 5100 Manuale utente
BT
BT ON-AIR 2300 SMS Manuale utente
BT
BT Converse 1200 Manuale utente
BT
BT DIVERSE 4010 CLASSIC Manuale utente
BT
BT CALLER DISPLAY 1000 Manuale utente
BT
BT FREESTYLE 75 Manuale utente
BT
BT Freestyle 750 Manuale utente
BT
BT Freelance XC 100 Manuale utente
BT
BT Quartet Diverse 2015 Manuale utente
BT
BT LYRIC 2500 Manuale utente
BT
BT 2100 Classic Manuale utente
BT
BT BT3940 Manuale utente
BT
BT Freelance XD 110 Manuale utente
BT
BT FREELANCE XC 1100 Manuale utente
BT
BT 2700 Manuale utente
BT
BT Freelance XD 5500 Manuale utente
BT
BT DIVERSE 5410 Manuale utente
