Budweiser BUD-E Manuale utente
* Budweiser, Bud-e Fridge and Bud-e App are trademarks
of Anheuser-Busch, LLC.
Designed and manufactured by
Toll free number 1-855-283-7331
www.budweiser.ca Apple and the Apple logo are trademarks of Apple Inc.,
registered in the U.S. and other countries. App Store
is a service mark of Apple Inc. Android and Google
Play are trademarks of Google Inc.
USER GUIDE (CANADA)
2
SAVE THIS
USER GUIDE
You will need this manual for safety
instructions and operating procedures.
Put it and the original sales invoice in
a safe, dry place for future reference.
Model number:
010275
Serial number:
IC # 11838A-CONNREFG
FCC # 2AA7-CCONNREFG
3
Move packaged unit to approximate position of installation and allow unit to rest upright in the correct position
for 24 hours before plugging in. Failure to comply will void warranty.
NOTES BEFORE INSTALLATION
1. Allow unit to rest upright in the correct position for 24 hours
before plugging in.
2. Position unit in a well ventilated area and ensure you allow a
minimum of 3/4 inches on the sides and 2 inches at the
top and back of the refrigerator.
3. Do not rest any objects on the top or sides of the unit.
4. The refrigerator requires a 110V US type power outlet.
5. After turning the refrigerator on, allow it to reach pre-
programmed temperature (0°C/32°F) over a 12 hour period.
3 LEDs will light up to indicate the correct temperature.
6. After this initial period (minimum 12 hours) the refrigerator
setting can be changed to achieve below zero temperatures
by illuminating all 5 LEDs (-1.5°C/-3.0°C) or (29°F/26°F)
7. To ensure the unit can reach below zero temperatures
efficiently, please load with cold beer as opposed to room
temperature product where possible.
8. It is normal for the sides of the refrigerator to be warm at
times during operation.
4
TABLE OF CONTENTS
Safety Precautions 5
Installing Refrigerator 7
Parts Overview 9
Getting Started 10
Connecting to Wi-Fi 11
Mobile App 12
Wi-Fi Status 13
Temperature Settings 14
Refrigerator Beer Capacity 15
Stocking and Removing Beer 16
Care and Cleaning 18
Troubleshooting 19
FCC and IC 22
Read all of the instructions before using this appliance.
When using this appliance, always exercise basic safety
precautions, including the following:
1. Use this appliance only for its intended purpose
as described in this user guide.
2. This refrigerator must be properly installed in accordance
with the installation instructions before it is used. See
grounding instructions in the installation section.
3. Never unplug your refrigerator by pulling on the power
cord. Always grasp the plug firmly and pull straight out
from the outlet.
4. Contact a certified electrician to repair or replace immediately,
all electric service cords that have become frayed or otherwise
damaged. Do not use a cord that shows cracks or abrasion
damage along its length, the plug or the connector end.
5. Do not use any electrical device or any sharp instrument
when removing any ice build up.
6. Unplug your refrigerator before cleaning. Note: If for
any reason this product requires service, we strongly
recommend that a certified technician performs the service.
7. Before you throw away your old refrigerator take off the
doors. Leave the shelves in place so that children may not
easily climb inside.
8. After your refrigerator is in operation, do not touch the cold
surfaces when hands are damp or wet. Skin may adhere
to these extremely cold surfaces.
9. This refrigerator should not be recessed or built-in
in an enclosed cabinet. It is designed for free-standing
installation only.
10.Do not operate your refrigerator in the presence of
explosive fumes.
5
SAFETY PRECAUTIONS
Danger Risk of child entrapment or fridge falling.
Risk of child choking on small parts. This fridge
is not made for use by children. Before you throw
away your old refrigerator take off the doors.
Leave the shelves in place so that children may
not easily climb inside.
6
SAFETY PRECAUTIONS (continued)
Danger – Risk of fire or explosion. Flammable refrigerant used. To be repaired only by trained and authorized service
personnel. Do not puncture refrigerant tubing. Do not use mechanical devices to defrost refrigerator.
Caution – Risk of fire or explosion. Flammable refrigerant used. Consult repair manual/owner’s guide before attempting
to service this product. All safety precautions must be followed.
Caution – Risk of fire or explosion. Dispose of properly in accordance with federal or local regulations.
Flammable refrigerant used.
Caution – Risk of fire or explosion due to puncture of refrigerant tubing; follow handling instructions carefully.
Flammable refrigerant used.
7
INSTALLING YOUR REFRIGERATOR
Unpacking Your Refrigerator
1. Remove all packaging material. This includes the foam base
and all adhesive tape holding the refrigerator accessories
inside and outside.
2. Inspect and remove any remains of packing, tape or printed
materials before powering on the refrigerator.
Levelling Your Refrigerator
• Your refrigerator has two levelling legs which are located in
the front bottom corners of your refrigerator. After properly
placing your refrigerator in its final position, you can level
your refrigerator.
• Levelling legs can be adjusted by turning them clockwise to
raise your refrigerator or by turning them counter-clockwise
to lower your refrigerator. The refrigerator door will close
easier when the levelling legs are extended.
Proper Air Circulation
• To ensure your refrigerator works at the maximum
efficiency it was designed for, you should install it in a
location where there is proper air circulation, plumbing
and electrical connections.
• The following are recommended clearances around
the refrigerator:
Sides……………3/4" (19mm)
Top....................2" (50mm)
Back..................2" (50mm)
Electrical Requirements
• Make sure there is a suitable power outlet with proper
grounding to power the refrigerator.
• Avoid the use of three prong adapters or cutting off the
third grounding prong in order to accommodate a two
prong outlet. This is a dangerous practice since it provides
no effective grounding for the refrigerator and may result
in shock hazard.
INSTALLING YOUR REFRIGERATOR (continued)
8
Use of Extension Cords
Avoid the use of an extension cord because of potential safety
hazards under certain conditions. If it is necessary to use an
extension cord, use only a 3-wire extension cord that has a
3-blade grounding plug and a 3-slot outlet that will accept the
plug. The marked rating of the extension cord must be equal
to or greater than the electrical rating of the appliance.
Installation Limitations
• Do not install your refrigerator in any location not properly
insulated or heated, e.g. garage, etc. Your refrigerator was
not designed to operate in temperature settings below 55˚
Fahrenheit / 12˚ Celsius.
• Select a suitable location for the refrigerator on a hard
even surface away from direct sunlight or heat source, e.g.
radiators, baseboard heaters, cooking appliances, etc.
Any floor unevenness should be corrected with the levelling
legs located on the front bottom corners of the refrigerator.
In addition to the sounds from the amplified speaker, normal
operating sounds you may hear:
• Boiling water, gurgling sounds or slight vibrations are the
result of the refrigerant circulating through the cooling coils.
• The thermostat control will click when it cycles on and off.
9
PARTS OVERVIEW
Parts overview:
1. Speaker
2. Display
3. Door hinge
4. Control panel
5. Door
6. Shelves (x3)
7. Shelf roller (x18)
8. Shelf gates (x21)
9. Front feet (x2 adjustable)
Sounds/alerts overview:
• Adding stock
• Pressing the ‘PAIR’ button
• Pressing any function
button on the control panel
• End of cold countdown
• Door open
• Full fridge
• Power on
12
3 4
7
89
65
10
Remove the tape
off the rollers
Open refrigerator door and remove
all internal packaging and tape.
Check there is one ‘colour roller’ per
channel with silver magnetic feet
facing down as shown.
Plug the refrigerator into a 110V
power outlet.
1. 2. 3.
Colour roller x 18
GETTING STARTED
Move packaged unit to approximate position of installation and allow unit to rest upright in the correct position
for 24 hours before plugging in. Failure to comply will void warranty.
Indice
Altri manuali Budweiser Frigorifero
