Phillips (crosshead) screwdriver
e
Phillips (crosshead) screwdriver
②
②
①
①
Secure with hand
screw d.
cutouts
mounting hole
15.875mm
15.875mm
b
b
d
d
d
c
ce
ff
d
Installation
Square Holes
B
1
Attach the outer rack mounting brackets bto the
back side of the rack and secure them with hand
screws d.
2
Slide the inner rack mounting brackets a into
brackets bfrom the front, then secure them with
hand screws d.
3
Slide the TeraStation into the rack until it clicks into
place. Secure with hand screws d.
1
Insert 4 cage nuts hinto mounting holes in the
rack.
2
Attach brackets cto the TeraStation with screws e.
3
Attach the TeraStation to the rack with screws f.
Hint: Hook one tab of each
cage nut, then use a flat-head
screwdriver to insert the other
tab.
4 post rack
2 post rack
Back
Front
Front
Back
Installation is complete. Installation is complete.
①
②
cutout mounting hole
15.875mm
d
Back
Front
d
①
②
a
a
