Buffalo HD-WLSU2R1 Manuale utente
User Guide
HD-WLSU2R1 DriveStation Duo
35011434 ver.01
ÐÏ×ÅÒ
ÁÃÃÅÓÓ
2
ÐÏ×ÅÒ
ÁÃÃÅÓÓ
Power LED
Power On: Green
Raid Maintenance: Orange
Power Off: Off
Access LEDs
Access: Blinking Green
Failure: Red
Rebuild: Blinking Red
Power Off: Off
Front Panel Layout
3
Back Panel Layout
DC in
USB port
eSATA port
Note: Changing between RAID modes is done with the RAID Utility, included
with the software on your DriveNavigator DVD.
Power Mode
▲Auto
▼Off
4
Congratulations on your new DriveStation Duo! With dual hard drives, the
DriveStation Duo gives you many options for large capacity and easy-to-use
redundancy.
Insert the DriveNavigator DVD into your computer’s DVD-ROM drive.
DriveStation Setup
On a PC, DriveNavigator should automatically launch. If
it does not, manually launch [DriveNavi.exe] by clicking
[Start] and selecting [Run]... [option]. When the Run
dialog opens, type [d:\DriveNavi.exe] (where d is the
drive letter of your DVD-ROM drive). Click [OK] to
continue.
If you are installing the RAID utility on a Mac, open the
DVD and click [RaidUtility.dmg] to begin installation.
Click [Begin Installation]. Click [Next] to
step through the installation. Mac users
can skip this step.
5
After completing the setup wizard, your DriveStation Duo is installed and ready to
use!
By default, your Duo is congured in RAID 1 Mode. In RAID 1, data can be
recovered even if one of the hard disks in DriveStation fails. However, the total
available space is 1/2 of the maximum space.
If you prefer a different RAID conguration, or if you prefer to use DriveStation
as a single drive, you may use the RAID Utility to change your DriveStation’s
RAID settings. Turn to the next page for instructions on using the RAID Utility.
Out of the box, the DriveStation is formatted with FAT32, allowing it to be used
with most common operating systems. If you’re going to use it with programs
that generate lesizes larger than 4 GB, such as backup software, reformat the
DriveStation with NTFS or Mac OS Extended.
By default, all drives on the DriveStation are divided into 2 TB partitions. This
allows older versions of Windows, such as 32-bit Windows XP and Windows
Server 2003, to read the drives without additional software or service packs.
Users of newer operating systems may wish to re-partition the DriveStation with
larger partitions, but this is not recommended for 32-bit Windows XP. Windows
Server 2003 may be able to read larger partitions after the latest service pack is
applied.
The wizard will step you through setting up your DriveStation Duo, conguring
your RAID settings, and reformatting if desired.
The DriveStation Duo may be connected to your computer with either a USB
connection or an eSATA connection. The eSATA connection will usually give
higher performance.
Use either the eSATA cable or the USB cable to connect the Duo to your
computer at any given time. Do not connect both at once!
6
Using the RAID Utility
The RAID Utility allows you to congure your DriveStation Duo in several modes:
Normal Mode - Appears to your computer as two separate hard drives. Note that
normal mode only works with a USB connection. With an eSATA connection, only
one drive will be visible.
Spanning Mode - Appears to your computer as one large hard drive.
RAID 0 Mode - Appears to your computer as a single drive. Higher performance
than Spanning Mode.
RAID 1 Mirror - Appears to your computer as a single drive. The second drive is
an exact copy of the rst drive, for redundancy.
Notes:
・Changing the mode of the drives in your Duo will erase all data on them! Back
up any important data before using the RAID utility.
・Your computer must be connected to the DriveStation via USB to change the
RAID mode.
On a PC, You may launch the RAID Utility by clicking on [RAIDUtility] in the
DriveStation Duo program group.Or, you can launch the program from the Start
menu.
On a Mac, Double-click [RaidUtility] icon on your desktop.
7
Using the RAID Utility
Once launched, the RAID Utility will briey scan for your DriveStation
Duo. This may take a few seconds.
The initial screen will show your current conguration. If your Duo is
new, it will probably be in RAID 1 mode.
To change the RAID mode, click [Cong] and choose [Disk Cong].
8
Using the RAID Utility
Select the drive structure that you’d like to use.
On a PC, the disk can be formatted with FAT32 or NTFS. Select the
format that you prefer. FAT32 is compatible with most Windows PCs
and Macs. NTFS offers the best performance with Windows, but isn’t
compatible with Mac. NTFS is recommended for use with backup, video
editing and other programs that may need lesizes larger than 4GB.
If you are using Windows XP, or Windows Server 2003 without SP1 or
later, use compatability mode. Compatability mode will divide drives into
2 TB partitions that can be read by Windows XP or Windows Server 2003.
Click [Yes], and [Yes] again. Understand that this will erase any data on
the drive!
9
The DriveStation Duo includes several optional disk utilities for use with
Windows computers. To install and use these utilities, insert the DVD-ROM
that came with your DriveStation Duo into a Windows PC.
Click [Begin Installation] and then [Additional Software Installation].
TurboPC can increase data transfer speeds for your Buffalo product.
TurboCopy uses caching to increase data transfer speeds.
Backup Utility is software to back up and restore data from your PC. To use,
select a source drive to be backed up and a target location for backup data.
RAMDISK Utility uses the memory in your computer as a virtual hard drive
“RAM drive”. The RAM drive is recognised as a hard drive by your computer,
and you can read and write data to it like any other hard drive.
Buffalo Tools Launcher lets you easily launch software from the Buffalo
utility suite. Just click an icon to launch the desired Buffalo tool or utility.
eco Manager for HD lets you put the DriveStation into sleep mode to save
power.
SecureLockMobile encrypts the data on your DriveStation, preventing the
data from being accessed by anyone but you.
To learn more about installing and using these utilities, click on [View User
Manual].
Other Utilities (Windows Only)
10
Caution:
Please do not lift the DriveStation Duo by its front cover. The front cover
might come off.
Before removing hard drives, touch a metal object to dissipate static
electricity in your body, or wear a static wrist strap.
Work carefully! Some of the metal edges inside the DriveStation Duo
are sharp.
Damage done to the DriveStation Duo by improper disassembly is not
covered by Warranty.
Do not reverse the two drives, or your data may be lost.
Replacement drives should be the same capacity as the drive being
replaced, or larger.
Do not use a hard drive that has previously been used in a DriveStation
Duo as a replacement drive. Remove any partitions on it rst, or rebuild
might not work normally.
Replacement hard drives are available from www.buffalotech.com.
Replacing a drive can result in lower transfer speeds for DriveStation
Duo depending on the performance of the replacement drive.
Replacing a Hard Drive
Altri manuali per HD-WLSU2R1
1
Indice
Lingue:
Altri manuali Buffalo Magazzinaggio
Buffalo
Buffalo MiniStation HD-PCU2 Manuale utente
Buffalo
Buffalo TeraStation Pro TS-TGL/R5 Manuale utente
Buffalo
Buffalo TeraStation 7000 Manuale utente
Buffalo
Buffalo DriveStation HD-HB160U2 Manuale utente
Buffalo
Buffalo LinkStation Pro Manuale utente
Buffalo
Buffalo LS520DE Manuale utente
Buffalo
Buffalo SSD-PMU3 Manuale utente
Buffalo
Buffalo DriveStation HD-HC160U2 Manuale utente
Buffalo
Buffalo HD-HCU2 DriveStation Manuale utente
Buffalo
Buffalo TS6400DN0802 Manuale utente
Buffalo
Buffalo MicroStation SHD-PE Manuale utente
Buffalo
Buffalo LinkStation LS-LGL Manuale utente
Buffalo
Buffalo DriveStation HD-HBU2 Series Manuale utente
Buffalo
Buffalo HD-HLAN Series Manuale utente
Buffalo
Buffalo HD-H Series Manuale utente
Buffalo
Buffalo HD-QS4.0TSU2/R5 Manuale utente
Buffalo
Buffalo HD-CELU2 DRIVESTATION Manuale utente
Buffalo
Buffalo HD-LCU3 Manuale utente
Buffalo
Buffalo TS1400R Manuale utente
Buffalo
Buffalo SSD-WA256T Manuale utente
