Bushnell 119599C2 Manuale utente
Model#: 119599C2
INSTRUCTION MANUAL
MY CAMERAS : REFERENCE LOG
# Camera Name Serial # Location
1
2
3
4
5
6
Page Index
Important Note.............................................................
QUICK START GUIDE....................................................
Managing Your Cameras Online...............................
Managing Your Cameras by Cell Phone App..........
Introduction.................................................................
Parts and Controls.......................................................
Installing the Batteries and SD Card........................
Using the Aggressor Wireless Cam........................
Operating Modes (O/On/Setup)............................
Using the Setup Menu................................................
Using the Field Scan Feature.....................................
Setup Menu: Parameter/Settings Reference..........
Camera Name and Coordinate Input.......................
Mounting and Positioning the Camera...................
Playing Back and Deleting Photos/Videos.............
Downloading Photos/Videos....................................
FAQ................................................................................
Troubleshooting..........................................................
Technical Specications..............................................
4
5
8
15
16
17
19
21
21
23
27
31
39
40
42
45
47
51
57
4
IMPORTANT NOTE
Congratulations on your purchase of the Bushnell Aggressor
Wireless Cam! Bushnell is very proud of this camera and we are
sure you will be pleased with it as well. Please refer to the notes
below and the instructions in this manual to ensure that you are
completely satised with this product.
If your Bushnell Aggressor Wireless Cam does not seem to be
functioning properly or if you are having image quality issues,
please check the FAQ/Troubleshooting section on pages 47-
56.
Problems are often due to something simple that was
overlooked, or require only changing one setting to solve.
Bushnell recommends using Energizer®Lithium AA batteries
(12 required) in the Aggressor Wireless Cam to obtain
maximum battery life
Do not mix old and new batteries
Do not mix battery types-use ALL lithium or ALL alkaline
Bushnell recommends using SanDisk®SD and SDHC Cards
(up to 32GB capacity, Ultra®or Extreme®series for HD video)
in the Aggressor Wireless Cam
Note: the Bushnell Aggressor Wireless Cam is not designed
or intended for operation or sale outside of the United States.
5
Quick Start Guide
1. Go to wirelesstrophycam and click “SETUP A NEW
ACCOUNT”.
2. Fill in your personal info and set your notication preferences.
Click “CREATE”. You will receive a verication email -click the link in
this, then continue with Step 3.
3. Click the plus sign (+), name your camera and enter its serial
number (printed inside the camera*). Click“ADD IT”.
1 2
3
*Note: we suggest taking a photo
of your Trophy Cam’s serial number
with your cell phone camera, to
keep it handy for future reference.
6
4. Open the camera’s latch and install 12 “AA” size batteries (lithium or
alkaline). Insert a new SD card (up to 32 GB).
5. Move camera’s power switch to the SETUP position, then press
the MENU button.
6. Select your preferred method of receiving images (Cell phone
number or Email address). Press OK on the camera’s control
panel.
7. Enter your cell phone number or email address (lower case letters
are not necessary or provided in email settings).
Quick Start Guide
4
5
6
7
8. Press MENU. The camera will save your information, do a GPS
search (allow a few minutes the rst time and preferably test
OUTDOORS), then countdown and take a test photo. Note: the
LCD display will power o while the camera is transmitting the
image. If the camera is unable to connect to a valid cell phone # or
email, the display will indicate “Modem Init Fail”.
9. If “Modem Init Fail” is displayed, try powering camera OFF, then
straight to ON. In ON mode, the camera will also attempt to send
the rst image when triggered. After rst transmitted image is
confirmed, both setup test images and live ON images should
function properly.
10. The camera displays the signal strength for the last connection.
Check your cell phone or email to verify the test image was
received.
11. After you have veried the camera is transmitting images, move
the switch to ON to initiate “live” triggering, and leave the area.
12. You can now log in to your account wirelesstrophycam.
to view new images, change settings, and monitor the status of
one or more wireless cameras. You can also control your camera(s)
remotely via the Bushnell Wireless Cam app, a free download for
iPhone® and Android™.
Quick Start Guide
iPhone® is a registered trademark of Apple Inc.
Android™is a trademark of Google Inc.
8
The camera will notify you when new images are captured and
available for viewing. You can change the camera’s settings* by
clicking the gear icon under the camera’s name. You can also
remotely monitor the battery level, wireless signal strength, and
remaining SD card space.
*Note: it is not possible to set the Camera Mode to “Video” when Wireless Mode is switched
on. Only still photos can be transmitted wirelessly, due to the large les generated by video
and carrier bandwidth limitations.
MANAGING YOUR CAMERA(S) ONLINE
9
Adding A Camera
•Once your account is setup and you are logged in, you will see
the My Cameras screen (a). To return to it at any time, click “My
Cameras” at the top right of the webpage.
•The My Cameras screen allows you to quickly view images from
any or all of your active cameras, display its location on a map or
satellite photo, and monitor the current state of your battery level,
remaining memory capacity, signal strength, service plan status,
and even change the settings of any camera remotely.
•To add a new camera to the list, click“Add a camera”. Create a name
for this camera, and enter its serial number (see pg. 5 for SN location)
(b). Then click “Add it!”
a
b
MANAGING YOUR CAMERA(S) ONLINE
10
Viewing Camera Images and Status
•The thumbnail image to the left of a camera’s name represents the
most recent photo that it captured (c). Click on the thumbnail to
see an overview of all images captured to date from that camera
(d). Click any single image to see a larger view, with options at the
bottom of the window to download the thumbnail, get a high
resolution image le, delete the image, or share it on Facebook™.
•Click the battery icon (e) to the right of the thumbnail image to
display the current power level of the camera’s batteries.
•Click the signal strength icon (f) to display the condition of the
camera’s transmitting signal.
•Click the memory capacity gauge (g) below the battery icon to
display the percentage of the camera’s SD card that has been used.
•Click the gear icon (h) to open a new window (next page) that will
allow you to change the camera’s settings remotely.
d
c
e f
g h
MANAGING YOUR CAMERA(S) ONLINE
Indice
Altri manuali Bushnell Telecamera da ricognizione
Bushnell
Bushnell 119904S Manuale utente
Bushnell
Bushnell 66060WM Manuale utente
Bushnell
Bushnell CELLUCORE 24 Manuale utente
Bushnell
Bushnell TRAIL SENTRY 119303 Manuale utente
Bushnell
Bushnell Trophy Cam 98-1559 / 1-10 Manuale utente
Bushnell
Bushnell Trophy Cam Agressor 11977 Manuale utente
Bushnell
Bushnell 119904D Manuale utente
Bushnell
Bushnell TRAIL SENTRY 119320C Manuale utente
Bushnell
Bushnell TRAIL SENTRY 119320C Manuale utente
Bushnell
Bushnell Trophy Cam 119435 Manuale utente
Bushnell
Bushnell CELLUCORE 20 SOLAR Manuale utente
Bushnell
Bushnell 119437C Manuale utente
Bushnell
Bushnell Trophy Cam 119676C Manuale utente
Bushnell
Bushnell X-8 TRAIL CAM 119327 Manuale utente
Bushnell
Bushnell TRAIL SENTRY 11-9000 Manuale utente
Bushnell
Bushnell Trophy Cam HD 119676 Manuale utente
Bushnell
Bushnell CELLUCORE 30 Manuale utente
Bushnell
Bushnell Trail Scout 11-9833 Manuale utente
Bushnell
Bushnell 119438 Manuale utente
Bushnell
Bushnell Trailscout 119700 Manuale utente
