Byron DIC-24615 Manuale utente
DIC-24615
2
Instruction manual
3
1 Safety
1. Please read these instructions carefully before installing and
using the product.
2. Do not cut the power supply cable to extend it; the device
(transformer) will not work with a longer cable. Do not plug in the
device until all the wiring has been finished.
1.1 INSTALLATION SAFETY
1. Keep children and bystanders away while installing the products.
Distractions can cause you to lose control.
2. Do not overreach when installing this product. Keep proper
footing and balance at all times. This enables better control in
unexpected situations.
3. This product is not a toy. Mount it out of reach of children.
1.2 OPERATION SAFETY
1. Do not operate electrically powered products in explosive
atmospheres, such as in the presence of flammable liquids ,
gases, or dust. Electrically powered products create sparks which
may ignite the dust or fumes.
2. The warnings, precautions, and instructions discussed in this
instruction manual cannot cover all possible conditions and
situations that may occur. It must be understood by the operator
that common sense and caution are factors which cannot be built
into this product, but must be supplied by the operator.
3. Do not expose the Power Adapter of this product to rain or wet
conditions. Water entering the Power Adapter will increase the
risk of electric shock.
4. Do not abuse the Power Cord. Never use the cord for unplugging
the plug from the outlet. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled cords increase
the risk of electric shock.
5. The adapter must match the outlet. Never modify the plug in any
way. Unmodified plugs and matching outlets will reduce risk of
electric shock.
2 Parts description
2.1 WHAT'S IN THE BOX
1. Indoor unit (monitor)
2. Outdoor unit (doorbell)
3. Mounting plate (outdoor unit)
4. Battery (indoor unit)
5. Battery pack (outdoor unit)
6. AC adapter docking station (indoor unit)
7. Micro-USB cable
8. Manual
9. Screws and plugs
2.2 PRODUCT OVERVIEW
2.2.1 Indoor unit (monitor)
1. Screen
EN
Instruction manual
4
2. Power on/off
3. Menu / OK button
4. Scroll key forward / snapshot / video
5. Scroll key back
6. Power / Charge indicator
7. Monitor / Intercom button
8. Door opener
9. Gate opener
10. Microphone
11. Micro SD card slot
12. Power indicator
13. AC adapter
2.2.2 Outdoor unit (doorbell)
1. Microphone
2. Night sensor
3. Outdoor camera
4. Name plate
5. Call button
6. External antenna plugin
7. Reset button
8. Power switch
9. Antenna switch
3 Installation
Make sure pin 1 at the back of the outdoor unit is switched to ‘power
on’.
3.1 PLACING THE INDOOR UNIT (MONITOR)
The indoor unit (monitor) is designed to be portable.
A. Place the charging dock on a flat, stable surface near a wall outlet.
B. Plug in the adapter on the back of the charging dock.
C. Place the indoor unit on the charging dock.
3.2 MOUNT THE OUTDOOR UNIT
(DOORBELL)
To mount the outdoor unit, you will need the following tools:
üA suitable screwdriver for the included screws.
üA drill and suitable drill bit for the included screw plugs.
A. Position the provided mounting plate where desired.
B. Mark the screw positions with a pen.
C. Drill the necessary holes.
D. Insert the plugs.
E. Use a knife or sharp object to puncture the cable gland. (Optional,
only when installing the AC Power. Cables are not included.)
F. Pull the required cables through the cable gland. (Optional, only
when installing the AC Power. Cables are not included.)
G. Fasten the mounting plate with the screws.
H. Remove the front cover of the outdoor unit by removing the screw
at the bottom.
I. Attach the outdoor unit to the mounting plate.
J. Fasten the outdoor unit with the supplied screws.
Instruction manual
5
K. Charge the battery (see 3.3.3) and place the battery in the
outdoor unit.
L. Place the front cover and fasten the screw at the bottom of the
outdoor unit to secure the cover.
3.3 ELECTRICAL INSTALLATION
3.3.1 Connecting AC power to the indoor unit
(monitor)
The monitor is portable and can be used on battery power, AC power
or both. When the AC adapter is connected the battery charges until
full and then operates directly from the AC adapter. Only use the
included AC adapter.
3.3.2 Installing and charging the indoor unit
battery
A. Open the battery cover on the back of the unit.
B. Check the label on the battery for the correct orientation.
C. Insert the battery and place back the battery cover.
D. Place the indoor unit on the charging dock.
E. Charge the battery completely before using the monitor on battery
power alone.
3.3.3 Charging outdoor unit battery
The outdoor unit (doorbell) can be operated on battery or AC power
(AC adapter not included). If operated on battery, it must be removed
in order to re-charge.
A. Remove the screw holding the front cover.
B. Remove the front cover.
C. Press the metal lever and pull out the battery pack.
D. Re-charge the battery by using the micro USB charge adapter
supplied for the monitor.
E. After charging: Insert the battery into the outdoor unit.
F. Place the front cover.
G. Fasten the screw holding the cover in place.
3.3.4 Connecting AC power to the outdoor
unit (doorbell) (adapter not included)
The outdoor unit is portable and can be used on battery power or AC
power. To use the outdoor unit on AC power you need an adapter of
8 – 24 V.
To connect the AC terminal blocks, you will need the following tool:
üA small flat head screw driver.
A. ORANGE terminal block: Loosen the terminal screws.
B. With the terminal facing you: Insert the (+) wire on the left and the
(-) wire on the right.
C. Fasten the terminal screws.
EN
Instruction manual
6
3.3.5 Connecting a door lock (not included)
It is possible to connect a lock to the outdoor unit that can be opened,
using the monitor. Door locks are sold separately. Article no: DB5005
& DB5005L
To connect the door lock, you will need the following tool:
üA small flat head screw driver.
üYou can only use the door lock when it is connected to an
extended AC power transformer (min 12V).
üConsult the manual of the door lock for further explanation on
installation.
A. On the outdoor unit: Loosen the green terminal screws. (see
sticker on the outdoor unit for position)
B. Insert the wires (See sticker on the outdoor unit for position)
C. Fasten the terminal screws.
D. On the lock: Loosen the 2 terminal screws.
E. Insert the wires (any order)
F. Fasten the terminal screws.
3.3.6 Connecting a gate opener (not included)
It is possible to connect a gate opener to the outdoor unit that can be
opened using the indoor unit (monitor).
To connect the gate opener, you will need the following tool:
üA small flat head screw driver.
üYou can only use the gate opener when it is connected to an
extended AC power transformer (min 12V).
üConsult the manual of the door lock for further explanation on
installation.
A. On the outdoor unit: Loosen the blue terminal screws. (see sticker
on the outdoor unit for position)
B. Insert the wires. (see sticker on the outdoor unit for position)
ðIt is important that the + and – wires are in the correct position.
A. Fasten the terminal screws.
B. On the gate opener: (See the manual provided with your gate
opener.)
3.3.7 Connecting the external antenna (not
included)
The internal antenna is sufficient in most cases but can be extended
using the external antenna.
Attach the external antenna to the outdoor unit and turn the switch (8)
at the back of the outdoor unit.
4 Basic functions
4.1 SCREEN ICONS
1. Signal strength
2. SD card inserted
3. a) Outdoor unit powered by battery
b) Outdoor unit powered by power adapter
4. a) Video recording
b) Picture captured
5. a) Indoor unit powered by battery
b) Indoor unit powered by power adapter
Instruction manual
7
6. Time and date
• Charge the battery immediately when the icon indicates a low
battery level.
4.2 SETTINGS MENU
In the standby mode, first press the monitor / intercom button and
then the menu / OK button to open the main menu. Use the scroll
keys to navigate through the different settings. Press the menu / OK
button to select the highlighted submenu.
1. Camera pairing
2. Image setting
3. Volume control
4. Ringtone setting
5. Play back
6. Rec/snap
7. Time setting
8. Unlock time setting
9. Exit
4.3 ANSWERING A CALL
When the doorbell rings, you can:
A. Press the intercom button talk to your visitor. The device
automatically makes a video or takes a picture.
B. Press the lock button to open the door (optional).
C. Press the gate button to open the gate (optional).
D. To make an extra recording, press the scroll forward / snap shot /
video button (4).
4.4 PAIRING THE INDOOR/OUTDOOR
UNITS
üBefore you can use the product, the indoor and outdoor units
need to be paired. Follow below procedure for pairing.
A. Press the power button on the indoor unit until the LED turns on.
B. Press the menu button.
C. Select the pairing icon.
D. Press the menu button to confirm.
E. On the screen you will see that the indoor unit is now in pairing
mode. Press the doorbell button for 5 seconds and the outdoor
and indoor unit will now be paired.
4.5 HOW TO NAVIGATE THROUGH
SETTINGS MENU
üWhen the indoor unit is battery-powered, first press the call
button on the outdoor unit to activate the monitor in order to
make changes in the settings.
A. Press the monitor / intercom button (7).
B. Press the menu / OK button (3).
C. Use the scroll keys to select the setting you want to change.
D. Press the menu / OK button to enter the setting.
E. Use the arrows to change the settings.
F. Press the menu / OK button to confirm and go back to the main
menu.
4.6 IMAGE SETTING
The image settings available consist of:
1. Brightness setting
EN
Instruction manual
8
2. Contrast setting
3. Color setting
4.7 VOLUME CONTROL
The volume settings available consist of:
1. Speaker volume
2. Microphone volume
3. To change the volume settings:
A. Use the arrow keys to select one of the available settings.
B. Press the menu button to confirm.
C. Use the arrow keys to adjust the setting.
D. Press the menu button to confirm.
E. Use the arrow keys to select exit.
F. Press the menu button to confirm.
4.8 RING TONE SETTING
A. With the arrow keys, select the music icon and press menu/ok
button.
B. Select one of the 24 different tunes and press menu/ok button to
confirm.
4.9 PLAY BACK RECORDINGS
A. Use the arrow keys to select the play back icon and press menu
button.
B. Use the arrow keys to select the video or photo icon.
C. Press the menu button.
D. Press the up and down button to select folder.
E. Press right button to access the selected folder.
F. Use up and down arrow buttons to select file.
G. Show the marked file with the right button.
H. Press the up and down buttons to show next or previous files on
screen.
• To go back one step in the menu, use the left button.
4.10 RECORDING VIDEOS/PHOTOS
• The system automatically records a video or takes a photo when
the call button is pressed.
An SD card (not included) is required for storing videos and
photos.
A. Press the direction buttons to select the rec/snap icon and press
the menu/ok button to confirm.
B. In the submenu there are 3 options:
1. Taking a photo
2. Recording a video
3. Exit
A. Use the arrow keys to select the desired function and press menu/
ok button to confirm.
Manually record a video or photo.
A. In the talk state, press the scroll forward key to start recording a
video or take a photo.
B. Press it again to stop recording.
C. When power is supplied to the outdoor unit, first press the monitor
button and then press the scroll forward key to take a picture or
start recording.
D. Press the key again to stop.
Instruction manual
9
4.11 TIME SETTING
A. Use the arrow keys to select the time setting icon
B. Press menu/ok to confirm.
C. Press left/right buttons to select the setting you want to change.
D. Press up/down buttons to adjust.
E. Press menu/ok to confirm.
4.12 UNLOCK TIME SETTING
This setting defines the duration of which the door lock stays
unlocked after pressing the “open door lock or gate button”
A. Use the arrow keys to select the unlock time icon ,
B. Press menu/ok to confirm.
C. Use the scroll keys to select between 100mS, 1S, 5S or 10S.
D. Confirm and exit by pressing the menu/ok button.
5 Cleaning and maintenance
• Clean the outside of the appliance with a soft and slightly
moistened cloth.
• Do not use any carboxylic cleaning agents or petrol, alcohol or
similar. These attack the surfaces of the devices. Besides, the
vapors are hazardous to your health and explosive. Do not use
any sharp edged tools, screw drivers, metal brushes or similar for
cleaning.
6 Frequently asked questions
Problem Solution
• The indoor unit does not
switch on.
• Make sure that the monitor is
connected to the power
source.
• Make sure the adapter plug is
properly pushed in to the
power outlet.
• The ring tone volume is too
low.
• Perhaps you extended the
cable. Extending the cable
can reduce the volume due to
being too long or too thin.
• I connected the indoor unit to
a lock but it does not work.
• Check if the lock is connected
properly and that a suitable
lock with an external power
source is used.
• I hear interference on the
line.
• Move other electronics away
from the unit to minimize
interference.
• Perhaps the cable is too long
or the wire too thin. Replace
the wire with a suitable one.
• There is no sound between
the outdoor unit and the
indoor unit.
• The microphone may be
obstructed. Clean the
microphone.
• Check that the cables are
connected and fastened
properly.
EN
Instruction manual
10
• I cannot talk or see video
when I press the intercom
button.
• When the outdoor unit is used
on battery, you can only talk
or see the video feed when
the doorbell is pressed. This
is for battery capacity
reasons.
7 Technical Data
• The appliance is suitable for domestic use only.
General Operating
Frequency
2400-2483.5MHz
Transmission rate 15~25fps(only effective
distance)
Unobstructed
effective range
200m
TX power 14~18dBm
RX sensitivity -85dBm
Operating
temperature
Max 50°C
Storage temperature -20°C ~ +60°C
Operating humidity <85%RH
Outdoor camera Sensor type CMOS
View angle About 85°
Supply voltage DC/AC 8~24V (battery:
3.7V/2000mAH 18650)
Consumption
current
300±50mA
Indoor monitor Screen size 3 inch (diagonal)
Resolution 480x272(RGB)
Supply voltage DC 5V/1A (battery:
3.7V/1500mAH)
Consumption
current
350±50mA
Charging time <2 hours
Image format JPEG
Video format AVI
SD card SDHC 2GB-32GB
8 Environment
This appliance should not be put into the domestic garbage at
the end of its durability, but must be offered at a central point for the
recycling of electric and electronic domestic appliances. This symbol
on the appliance, instruction manual and packaging puts your
attention to this important issue. The materials used in this appliance
can be recycled. By recycling of used domestic appliances you
Indice
Lingue:
Altri manuali Byron Sistema di interfono
Byron
Byron W255 Manuale utente
Byron
Byron DIC-25712 Manuale utente
Byron
Byron DIC-24712 Manuale utente
Byron
Byron BY101 Manuale utente
Byron
Byron SX304 Manuale utente
Byron
Byron DIC-23312 Manuale utente
Byron
Byron DIC-24312 Manuale utente
Byron
Byron DIC-24512 Manuale utente
Byron
Byron DIC-24112 Manuale utente
Byron
Byron DIC-24712 Manuale utente
Byron
Byron MP001 Manuale di istruzioni
Byron
Byron DIC-22815 Manuale utente
Byron
Byron DIC-24212 Manuale utente
Byron
Byron DIC-24102 Manuale utente
Byron
Byron LySonix 3000 Manuale utente
Byron
Byron DIC-25312 Manuale utente
Byron
Byron 765 Manuale utente
Byron
Byron DIC-24122 Manuale utente
Byron
Byron BY206 Manuale utente
Byron
Byron DIC-24112 Manuale utente
