C3 Custom Coolers ROVER Manuale utente
Remote Control Cooler
Applies to Models: ROVER, TRUCK
Styles and colors may vary
Designed, Molded and Assembled in the USA
Owner’s Manual
This manual contains assembly, use and maintenance
instructions. The remote controlled cooler must be assembled by an adult
who has read and understands the instructions in this manual.
Keep packaging away from children and properly dispose
of all packaging. Keep instructions for future reference.
2
If you have any questions or comments, please contact us at:
C3 Custom Cooler Creations
100 South CP Avenue
Lake Mills, WI 53551
1-844-723-4909
www.c3customcoolers.com
Important!
Do not return the product to the store. Please contact customer service at
1-844-723-4909 for assistance and replacement parts.
Safety............................................................ 03
General Warnings ................................................ 03
Battery Warnings ................................................ 04
User Requirements and Warnings ................................... 05
Care Warnings .................................................. 05
Parts............................................................. 06
List and Pictures ................................................. 06
Assembly......................................................... 08
Use.............................................................. 10
Charging the battery .............................................. 10
Re-charging interval and time....................................... 10
Battery Storage.................................................. 10
Battery Replacement and Disposal................................... 10
Cooler Operating Parts ............................................ 11
Cooler Control Panel Functions ..................................... 11
Turning On Cooler ............................................... 11
Operating MP3 Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Operating Headlights ............................................. 11
Operating Remote Control ......................................... 12
Maintenance ...................................................... 13
Services, Repairs and Parts ......................................... 13
Troubleshooting Guide ............................................. 14
Warranty ......................................................... 16
Contact Information ................................................ 16
Table of Contents
Thank You For Your Purchase
3
General Warnings
• Contains small parts, for adult assembly only. Keep small children
away when assembling. Remove and dispose of all packaging material
before assembly. Be sure to remove all packaging materials and parts
from underneath the RC cooler body.
• Battery posts, terminals and related accessories contain lead and
lead compounds (acids) chemicals known to the state of California to
cause cancer, reproductive harm, and are toxic and corrosive. Never
open battery.
• Body parts such as hands, legs, hair and clothing can get caught in
moving parts. Never place a body part near a moving part or wear loose
clothing while using the remote controlled cooler. Always wear shoes
when using the remote controlled cooler.
• Using the remote controlled cooler near streets, motor vehicles,
drop-offs such as: steps, water (swimming pools) or other bodies of
water, sloped surfaces, hills, wet areas, ammable vapors, in alleys,
at night or in the dark could result in an unexpected accident. Always
use the remote controlled cooler in a safe, secure environment with
continuous adult supervision.
• Using the cooler in unsafe conditions such as snow, rain, loose
dirt, mud, wet sand or ne gravel may result in unexpected action such
as tipping over and skidding, and damage to the electrical system and
battery.
• Refrain from using the remote controlled cooler in an unsafe manner
Examples include but are not limited to:
• Riding on top of or inside of the cooler
• Pulling the RC cooler with another vehicle or similar device
• Overloading cooler body (maximum load weight: 60 lbs.)
• Operating cooler outside of your line of sight
• Operating cooler at an unsafe speed for operating environment
Safety
WARNING!
4
Battery Warnings
• Use of a battery or charger other than the 12V rechargeable
battery and charger supplied with the C3 cooler may cause a re
or explosion. Only use the supplied 12V rechargeable battery and
charger with the C3 cooler.
• Liquids on the battery may cause re or electric shock. Always keep
all liquids away from the battery and keep the battery dry.
• Using the 12V rechargeable battery and charger for any product
other than the C3 cooler may result in overheating, re or
explosion. Never use the C3 cooler 12V rechargeable battery and
charger with another product.
• Explosive gases are created during charging. Charge the battery in
a well ventilated area. Do not charge the battery near heat or
ammable materials.
• Contact between the positive and negative terminals may result
in re or explosion. Avoid direct contact between the terminals.
Picking up the battery by the wires or charger can cause damage to
battery and may result in a re. Always pick up battery by its case
or handles.
• Tampering or modifying the electric circuit system may cause a
shock, re or explosion and permanently damage the system.
Exposed wiring and circuitry in the charger may cause electric
shock. Always keep the battery housing closed.
• Contact or exposure to battery leakage (lead acid) may cause
serious injury. If contact or exposure occurs immediately call your
physician. If the chemical is on the skin or in the eyes, ush with
cool water for 15 minutes. If the chemical is swallowed, immediately
give the person water or milk. Do not give water or milk if patient
is vomiting or has a decreased level of alertness. Do not induce
vomiting.
• Battery posts, terminals and related accessories contain lead
compounds (acid), chemicals known to the State of California to
cause cancer, reproductive harm and are toxic and corrosive. Never
open the battery.
WARNING!
5
User Requirements and Warnings
• Age Range: 16 years and older
• Maximum Load Weight: 60 lbs.
• Do not ride on, sit or stand on remote controlled cooler
• Only operate remote controlled cooler under adult supervision
• Always operate remote controlled cooler within your line of sight
• Keep your hands, hair and clothes away from moving parts
• Always wear shoes when using the remote controlled cooler
• Only drive on level ground
• Do not go near water, drop-offs or up and down steep slopes
• Do not drive cooler into loose dirt, mud, wet sand or ne gravel
• Do not drive cooler on streets or near cars
• Do not operate at night
• Do not drive cooler into people or objects
WARNING!
Care Warnings
• NEVER RIDE IN OR ON TOP OF COOLER
• NEVER LEAVE COOLER UNATTENDED. ALWAYS keep children in view
while operating cooler. Direct adult supervision is REQUIRED.
• NEVER use in roadways, near cars, on or near steep inclines or steps,
swimming pools or other bodies of water
• ALWAYS wear shoes
• NEVER sit or stand on cooler
• NEVER overload cooler
• RISK OF FIRE. Do not bypass. Replace only with C3 Cooler battery, charger
and circuitry.
• Park the remote controlled cooler indoors or cover it with a tarp to protect it
from wet weather
• Do not leave the remote controlled cooler in the sun for long periods of time
or fading may occur. Store in shade or cover with tarp.
• Do not wash with a hose or immerse in water
6
(1) Cooler Body
• Includes:
• (1) 12 volt, 10A battery
• (2) working headlights
• (2) speakers
(1) Front axle assembly
(1) Front steering rod
(1) Rear axle rod
(6) Washers
(1) Lock nut
(1) Bolt
Parts
Important! Check that you have all parts before assembly.
7
Parts
Important! Check that you have all parts before assembly.
To order replacement parts, refer to our website: www.c3customcoolers.com
(6) Cotter pins
(4) Wheels
(4) Hubcaps
(1) Battery Charger
(1) Remote Control
(2) AAA Batteries
8
Step 4
Insert front axle assembly as shown.
Insert (1) cotter pin in both bottom
ends of front axle assembly.
Using needle nose pliers, bend back
longer end of cotter pin to secure.
Attaching Wheels
Tools required: Phillips head screwdriver, wrench or needle nose pliers
Assembly time: 10 minutes
Assembly
Step 3
Line up notches on hubcaps with
notches on wheels.
Gently press hubcaps to snap
into place.
Step 1
Place cooler body upside down
on a non-abrasive, clean surface.
Remove rubber band from
rear gear box assembly.
Holding gear boxes rmly in
place, slide rear axle through
gear boxes.
Step 2
Place a wheel on left rear axle,
then a washer.
Make sure the at side of the
wheel faces out as shown and
inner wheel ts into gear box.
Insert (1) cotter pin through the
axle to secure wheels.
Using needle nose pliers, bend
back longer end of cotter pin to
secure.
Repeat for right rear axle.
remove rubber
band
insert pin &
bend back
9
Assembly
Step 5
Insert steering rod into gear
box.
Using a Phillips head
screwdriver and wrench,
secure steering rod in place
with bolt and lock nut.
Step 6
Place a washer on left
front axle, then wheel, then
another washer.
Make sure the at side of
wheel faces out as shown.
Insert (1) cotter pin through
axle to secure wheels.
Using needle nose pliers,
bend back longer end of
cotter pin to secure.
Repeat for right front axle.
insert pin &
bend back
Step 7
Line up notches on hubcaps
with notches on wheels.
Gently press hubcaps to
snap into place.
Step 8
Pair cooler remote.
Refer to instructions on page 12 of the Owner’s Manual.
Step 9
Charge battery for 12 hours.
Refer to instructions on page 10 of the Owner’s Manual.
10
Use
Charging the battery
1. Locate battery charger
2. Plug round end of charger into charging port on back of cooler
3. Plug pronged end of charger into a standard 120V wall outlet
• Do not use an extension cord
4. Charge cooler for 12 hours to ensure a full charge
5. After charging is complete, unplug charger from wall and cooler
Re-Charging Interval and Time
• On average, returning battery to a full charge will take 10 - 12 hours. Failure
to charge battery as directed could cause permanent damage to battery and
void warranty. Damage to battery may occur if allowed to drain completely.
Do not allow battery to drain completely.
• Check battery charger and charging port for wear and damage prior to
charging. Do not charge battery if damage has occurred. Only use the
provided 12V rechargeable battery and charger.
Battery Storage
• Store battery where temperatures are between -10°F and 75°F. Store on a
wood surface. Do not store battery on cement oors, as this will result in
battery discharge. Wipe battery clean with a dry cloth prior to storage.
Charge battery at least once per month.
Battery Replacement and Disposal
1. Remove back control panel cover from cooler, cut white zip ties, pull out old
battery and disconnect the red and black wires from the battery.
2. Use the double-sided tape included with replacement battery and place
two strips on the bottom of the replacement battery.
3. With the replacement battery outside of cooler, attach red and black wires to
the top of the new battery, reference the red and black markings on the terminals.
4. Place new battery inside cooler on tray, pressing rmly to adhere double-
sided tape to tray.
5. Using (2) zip ties included with replacement battery, secure zip ties around
battery and tray on both sides, cut excess tie length.
6. Replace control panel cover to the cooler and charge battery (12) hours to
ensure full charge.
7. Follow local battery disposal statutes & codes in disposal of battery waste.
Altri manuali per ROVER
1
Questo manuale è adatto per i seguenti modelli
1
Indice
