Cabletron Systems 9F120-08 Documento tecnico

9031372-01

SmartSwitch 9000

9F120-08 / 9F122-12 / 9F125-08

Local Management Appendix

Appendix

9F120-08 / 9F122-12 / 9F125-08

Module Speciﬁc Information

Introduction

This appendix contains local management information that is speciﬁc to the

9F120-08, 9F122-12 and 9F125-08 MicroLAN modules.

Default Interface Codes

The Default Interface ﬁeld on the General Conﬁguration Screen allows you to

enter a number (one through three). Each number represents a default interface

for the selected module. The table below lists the numbers you can enter, each

number’s corresponding interface, and a brief description of that interface. The

default for this ﬁeld is NONE, meaning no default interface selected.

Table 1. 9F12x-xx MicroLAN Module Default Interface Codes

Number Interface Description

1 SMB-1 1 mbps System Management Bus

2 SMB-10 10 mbps System Management Bus

3 FNB Flexible Network Bus (dual attached)

9F120-08 / 9F122-12 / 9F125-08 Module Speciﬁc Information

FNB Resource Conﬁguration Codes

All of the MicroLAN Modules described in this appendix physically attach to the

FNB-1 and the FNB-2 on the SmartSwitch 9000 backplane. By default, the module

inserts into four rings (the primary and secondary rings of the FNB-1 and the

FNB-2). The FNB Resource Conﬁguration Screen allows you to customize this

conﬁguration to your particular needs.

The FNB Resource Conﬁguration Screen allows you to:

• Select the rings (primary or secondary) of each FNB to which the module will

attach

• Determine whether the module will insert into those rings or bypass them

• Select the ring where the MAC will reside

The terms INSERT and BYPASS refer to relays that are located on the module.

INSERT causes a relay to connect the module’s front panel ports to the selected

ring. BYPASS causes a relay to disconnect the module’s front panel ports from the

selected ring.

INSERT:

BYPASS:

The FNB Resource Conﬁguration Screen lists all possible connections a module

can support on the FNB, displays the current connection, and allows you to

change the connection. Table 2 lists and describes the FDDI Connections from

which you can select.

Front FNB Ring

Relay

Panel

Ports

Front

Panel

Ports

FNB Ring

Relay

9F120-08 / 9F122-12 / 9F125-08 Module Speciﬁc Information

Table 2. 9F12x-xx MicroLAN Module FNB Resource Conﬁguration Codes

Conﬁguration

ID FDDI Connections Description

1 FNB 1 Pri. (MAC) Byp. ,

FNB 2 Pri. (No MAC) Byp.

The module is attached, but not inserted, to

the primary ring on the FNB-1. The module is

attached, but not inserted, to the primary ring

on the FNB-2. The MAC resides on FNB-1.

2 FNB 1 Pri. (MAC) Byp. ,

FNB 2 Pri. (No MAC) Ins.

The module is attached to the FNB-1 primary

ring and the FNB-2 primary ring. The switch

that inserts the module into the FNB-1 is

turned off. The switch that inserts the module

into the FNB-2 is turned on. The MAC resides

on FNB-1.

3 FNB 1 Pri. (MAC) Ins. ,

FNB 2 Pri. (No MAC) Byp.

The module is attached to the FNB-1 primary

ring and the FNB-2 primary ring. The switch

that inserts the module into the FNB-1 is

turned on. The switch that inserts the module

into the FNB-2 is turned off. The MAC resides

on FNB-1.

4 FNB 1 Pri. (MAC) Ins. ,

FNB 2 Pri. (No MAC) Ins.

The module is attached to the FNB-1 primary

ring and the FNB-2 primary ring. The switch

that inserts the module into the FNB-1 is

turned on. The switch that inserts the module

into the FNB-2 is turned on. The MAC resides

on FNB-1.

5 FNB 1 Pri. (No MAC) Byp. ,

FNB 2 Pri. (MAC) Byp.

The module is attached to the FNB-1 primary

ring and the FNB-2 primary ring. The switch

that inserts the module into the FNB-1 is

turned off. The switch that inserts the module

into the FNB-2 is turned off. The MAC resides

on FNB-2.

6 FNB 1 Pri. (No MAC) Byp. ,

FNB 2 Pri. (MAC) Ins.

The module is attached to the FNB-1 primary

ring and the FNB-2 primary ring. The switch

that inserts the module into the FNB-1 is

turned off. The switch that inserts the module

into the FNB-2 is turned on. The MAC resides

on FNB-2.

9F120-08 / 9F122-12 / 9F125-08 Module Speciﬁc Information

7 FNB 1 Pri. (No MAC) Ins. ,

FNB 2 Pri. (MAC) Byp.

The module is attached to the FNB-1 primary

ring and the FNB-2 primary ring. The switch

that inserts the module into the FNB-1 is

turned on. The switch that inserts the module

into the FNB-2 is turned off. The MAC resides

on FNB-2.

8 FNB 1 Pri. (No MAC) Ins. ,

FNB 2 Pri. (MAC) Ins.

The module is attached to the FNB-1 primary

ring and the FNB-2 primary ring. The switch

that inserts the module into the FNB-1 is

turned on. The switch that inserts the module

into the FNB-2 is turned on. The MAC resides

on FNB-2.

9 FNB 1 Pri. (MAC) Byp. ,

FNB 2 Sec. (No MAC) Byp.

The module is attached to the FNB-1 primary

ring and the FNB-2 secondary ring. The

switch that inserts the module into the FNB-1

is turned off. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-1.

10 FNB 1 Pri. (MAC) Byp. ,

FNB 2 Sec. (No MAC) Ins.

The module is attached to the FNB-1 primary

ring and the FNB-2 secondary ring. The

switch that inserts the module into the FNB-1

is turned off. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-1.

11 FNB 1 Pri. (MAC) Ins. ,

FNB 2 Sec. (No MAC) Byp.

The module is attached to the FNB-1 primary

ring and the FNB-2 secondary ring. The

switch that inserts the module into the FNB-1

is turned on. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-1.

12 FNB 1 Pri. (MAC) Ins. ,

FNB 2 Sec. (No MAC) Ins.

The module is attached to the FNB-1 primary

ring and the FNB-2 secondary ring. The

switch that inserts the module into the FNB-1

is turned on. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-1.

Table 2. 9F12x-xx MicroLAN Module FNB Resource Conﬁguration Codes (Continued)

Conﬁguration

ID FDDI Connections Description

9F120-08 / 9F122-12 / 9F125-08 Module Speciﬁc Information

13 FNB 1 Pri. (No MAC) Byp. ,

FNB 2 Sec. (MAC) Byp.

The module is attached to the FNB-1 primary

ring and the FNB-2 secondary ring. The

switch that inserts the module into the FNB-1

is turned off. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-2.

14 FNB 1 Pri. (No MAC) Byp. ,

FNB 2 Sec. (MAC) Ins.

The module is attached to the FNB-1 primary

ring and the FNB-2 secondary ring. The

switch that inserts the module into the FNB-1

is turned off. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-2.

15 FNB 1 Pri. (No MAC) Ins. ,

FNB 2 Sec. (MAC) Byp.

The module is attached to the FNB-1 primary

ring and the FNB-2 secondary ring. The

switch that inserts the module into the FNB-1

is turned on. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-2.

16 FNB 1 Pri. (No MAC) Ins. ,

FNB 2 Sec. (MAC) Ins.

The module is attached to the FNB-1 primary

ring and the FNB-2 secondary ring. The

switch that inserts the module into the FNB-1

is turned on. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-2.

17 FNB 1 Sec. (MAC) Byp. ,

FNB 2 Pri. (No MAC) Byp.

The module is attached to the FNB-1

secondary ring and the FNB-2 primary ring.

The switch that inserts the module into the

FNB-1 is turned off. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-1.

18 FNB 1 Sec. (MAC) Byp. ,

FNB 2 Pri. (No MAC) Ins.

The module is attached to the FNB-1

secondary ring and the FNB-2 primary ring.

The switch that inserts the module into the

FNB-1 is turned off. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-1.

Table 2. 9F12x-xx MicroLAN Module FNB Resource Conﬁguration Codes (Continued)

Conﬁguration

ID FDDI Connections Description

9F120-08 / 9F122-12 / 9F125-08 Module Speciﬁc Information

19 FNB 1 Sec. (MAC) Ins. ,

FNB 2 Pri. (No MAC) Byp.

The module is attached to the FNB-1

secondary ring and the FNB-2 primary ring.

The switch that inserts the module into the

FNB-1 is turned on. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-1.

20 FNB 1 Sec. (MAC) Ins. ,

FNB 2 Pri. (No MAC) Ins.

The module is attached to the FNB-1

secondary ring and the FNB-2 primary ring.

The switch that inserts the module into the

FNB-1 is turned on. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-1.

21 FNB 1 Sec. (No MAC) Byp. ,

FNB 2 Pri. (MAC) Byp.

The module is attached to the FNB-1

secondary ring and the FNB-2 primary ring.

The switch that inserts the module into the

FNB-1 is turned off. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-2.

22 FNB 1 Sec. (No MAC) Byp. ,

FNB 2 Pri. (MAC) Ins.

The module is attached to the FNB-1

secondary ring and the FNB-2 primary ring.

The switch that inserts the module into the

FNB-1 is turned off. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-2.

23 FNB 1 Sec. (No MAC) Ins. ,

FNB 2 Pri. (MAC) Byp.

The module is attached to the FNB-1

secondary ring and the FNB-2 primary ring.

The switch that inserts the module into the

FNB-1 is turned on. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-2.

24 FNB 1 Sec. (No MAC) Ins. ,

FNB 2 Pri. (MAC) Ins.

The module is attached to the FNB-1

secondary ring and the FNB-2 primary ring.

The switch that inserts the module into the

FNB-1 is turned on. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-2.

Table 2. 9F12x-xx MicroLAN Module FNB Resource Conﬁguration Codes (Continued)

Conﬁguration

ID FDDI Connections Description

9F120-08 / 9F122-12 / 9F125-08 Module Speciﬁc Information

25 FNB 1 Sec. (MAC) Byp. ,

FNB 2 Sec. (No MAC) Byp.

The module is attached to the FNB-1

secondary ring and the FNB-2 secondary ring.

The switch that inserts the module into the

FNB-1 is turned off. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-1.

26 FNB 1 Sec. (MAC) Byp. ,

FNB 2 Sec. (No MAC) Ins.

The module is attached to the FNB-1

secondary ring and the FNB-2 secondary ring.

The switch that inserts the module into the

FNB-1 is turned off. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-1.

27 FNB 1 Sec. (MAC) Ins. ,

FNB 2 Sec. (No MAC) Byp.

The module is attached to the FNB-1

secondary ring and the FNB-2 secondary ring.

The switch that inserts the module into the

FNB-1 is turned on. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-1.

28 FNB 1 Sec. (MAC) Ins. ,

FNB 2 Sec. (No MAC) Ins.

The module is attached to the FNB-1

secondary ring and the FNB-2 secondary ring.

The switch that inserts the module into the

FNB-1 is turned on. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-1.

29 FNB 1 Sec. (No MAC) Byp. ,

FNB 2 Sec. (MAC) Byp.

The module is attached to the FNB-1

secondary ring and the FNB-2 secondary ring.

The switch that inserts the module into the

FNB-1 is turned off. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-2.

30 FNB 1 Sec. (No MAC) Byp. ,

FNB 2 Sec. (MAC) Ins.

The module is attached to the FNB-1

secondary ring and the FNB-2 secondary ring.

The switch that inserts the module into the

FNB-1 is turned off. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-2.

Table 2. 9F12x-xx MicroLAN Module FNB Resource Conﬁguration Codes (Continued)

Conﬁguration

ID FDDI Connections Description

9F120-08 / 9F122-12 / 9F125-08 Module Speciﬁc Information

31 FNB 1 Sec. (No MAC) Ins. ,

FNB 2 Sec. (MAC) Byp.

The module is attached to the FNB-1

secondary ring and the FNB-2 secondary ring.

The switch that inserts the module into the

FNB-1 is turned on. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-2.

32 FNB 1 Sec. (No MAC) Ins. ,

FNB 2 Sec. (MAC) Ins.

The module is attached to the FNB-1

secondary ring and the FNB-2 secondary ring.

The switch that inserts the module into the

FNB-1 is turned on. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-2.

Table 2. 9F12x-xx MicroLAN Module FNB Resource Conﬁguration Codes (Continued)

Conﬁguration

ID FDDI Connections Description

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Cabletron Systems Interruttore

Cabletron Systems

Cabletron Systems DLEHF-MA Manuale utente

Cabletron Systems

Cabletron Systems SmartSTACK ELS100-S24TX2M Manuale utente

Cabletron Systems

Cabletron Systems SmartSwitch 6500 Manuale utente

Cabletron Systems

Cabletron Systems SynOptics 3000 Series Manuale utente

Cabletron Systems

Cabletron Systems SmartSwitch 8H02-16 Manuale utente

Cabletron Systems

Cabletron Systems TRFMIM 28 TRFMIM-28 Manuale utente

Cabletron Systems

Cabletron Systems MMAC-Plus 9H423-28 Manuale

Cabletron Systems

Cabletron Systems MMAC-Plus 9H531-18 Manuale utente

Cabletron Systems

Cabletron Systems ATX Manuale utente

Cabletron Systems

Cabletron Systems 6H128-08 Manuale utente

Cabletron Systems

Cabletron Systems SmartSTACK ELS100-S24TX2M Manuale di programmazione

Cabletron Systems

Cabletron Systems BRIM-A6 Manuale utente

Cabletron Systems

Cabletron Systems Fast Network 10 Manuale utente

Cabletron Systems

Cabletron Systems CyberSWITCH CSX1000 Manuale utente

Cabletron Systems

Cabletron Systems FN100 Manuale utente

Cabletron Systems

Cabletron Systems Ethernet Hubs Manuale utente

Cabletron Systems

Cabletron Systems SmartCell 6A000 Istruzioni per il montaggio

Cabletron Systems

Cabletron Systems 9F122-12 Manuale utente

Cabletron Systems

Cabletron Systems CSX200 CyberSWITCH Manuale utente

Cabletron Systems

Cabletron Systems SmartSwitch 9000 Documento tecnico

Cabletron Systems

Cabletron Systems SmartSTACK EPIM1000-S1LX 1000BASE-LX Manuale utente

Cabletron Systems

Cabletron Systems MMAC-Plus 9EX02-12 Manuale utente

Cabletron Systems

Cabletron Systems MiniMMAC Manuale utente

Cabletron Systems

Cabletron Systems CSX200 CyberSWITCH Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente