Caenrfid Quattro R4321P Documento tecnico

TECHNICAL INFORMATION MANUAL

Revision 3 –29 September 2020

R4321P

Smart 4-port RAIN RFID Long Range Reader

Visit the Quattro R4321P web page, you will find the latest revision

of data sheets, manuals, certifications, technical drawings, software and firmware.

All you need to start using your reader in a few clicks!

Scope of Manual

The goal of this manual is to provide the basic information to work with the Quattro R4321P Smart 4-port

RAIN RFID Long Range Reader.

This manual refers to Quattro R4321P DISTRO firmware revision 1.2.0.

Change Document Record

Date

Revision

Changes

Pages

16 Sep 2019

Preliminary Release

17 Feb 2020

Added CE Compliance paragraph and Quattro R4321P CE

Declaration of Conformity

67, 69

Added notes regarding the Ethernet cable specification

9, 17, 41

06 Apr 2020

Added FCC Compliance paragraph and Quattro R4321P FCC

Grant

68, 70

29 Sep 2020

Added Installation Notice paragraph

Modified RFID paragraph

Modified EASY2READ Configuration Options and CUSTOM

Configuration Options paragraphs

22, 34

Added HID Profile chapter

49÷53

Added HID Configuration Options paragraph

Modified EASY2READ Profile and CUSTOM Profile chapters

37÷40, 54÷57

Added firmware revision in Scope of Manual paragraph

Added Connecting to RA0003 Multiplexer chapter

65÷67

Reference Document

[RD1] EPCglobal: EPC Radio-Frequency Identity Protocols Class-1 Generation-2 UHF RFID Protocol for

Communications at 860 MHz –960 MHz, Version 2.0.1 (April, 2015).

[RD2] G.S.D. s.r.l. - Report CE mark –R4321P –Quattro. Test report n. 19517 Rev. 00 –03 January 2020.

[RD3] CMC Centro Misure Compatibilità S.r.l. - Report Federal Communication Commission (FCC) –

Quattro R4321P –Smart 4-port RAIN RFID Long Range Reader. Test report n. R20020701 Rev.

1.0 –05 Mar 2020

[RD4] CMC Centro Misure Compatibilità S.r.l. - Report Federal Communication Commission (FCC) –

Quattro R4321P –Smart 4-port RAIN RFID Long Range Reader. Test report n. R20020801 Rev.

1.0 –05 Mar 2020

CAEN RFID srl

Via Vetraia, 11 55049 Viareggio (LU) - ITALY

Tel. +39.0584.388.398 Fax +39.0584.388.959

info@caenrfid.com

www.caenrfid.com

Disclaimer

No part of this manual may be reproduced in any form or by any means, electronic, mechanical, recording,

or otherwise, without the prior written permission of CAEN RFID.

The information contained herein has been carefully checked and is believed to be accurate; however, no

responsibility is assumed for inaccuracies. CAEN RFID reserves the right to modify its products

specifications without giving any notice; for up to date information please visit www.caenrfid.com.

Federal Communications Commission (FCC) Notice

This device was tested and found to comply with the limits set forth in Part 15 of the FCC Rules. Operation

is subject to the following conditions: (1) this device may not cause harmful interference, and (2) this device

must accept any interference received including interference that may cause undesired operation. These

limits are designed to provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment.

This device generates, uses, and can radiate radio frequency energy. If not installed and used in accordance

with the instruction manual, the product may cause harmful interference to radio communications.

Operation of this product in a residential area is likely to cause harmful interference, in which case, the user

is required to correct the interference at their own expense. The authority to operate this product is

conditioned by the requirements that no modifications be made to the equipment unless the changes or

modifications are expressly approved by CAEN RFID.

Disposal of the product

Do not dispose the product in municipal or household waste. Please check your local regulations for

disposal/recycle of electronic products.

Index - Quattro Technical Information Manual 4

Index

Scope of Manual.........................................................................................................................................................2

Change Document Record .........................................................................................................................................2

Reference Document .................................................................................................................................................2

Index ....................................................................................................................................................................................4

List of Figures .....................................................................................................................................................................5

List of Tables.......................................................................................................................................................................5

1INTRODUCTION ........................................................................................................................................................6

Product Description ...................................................................................................................................................6

Ordering Options .......................................................................................................................................................6

Installation Notice ......................................................................................................................................................7

2GETTING STARTED ...................................................................................................................................................9

Introduction................................................................................................................................................................9

Connecting to the Quattro Reader using the Ethernet port.....................................................................................9

Ethernet Communication Setup .....................................................................................................................9

Easy Controller ............................................................................................................................................. 10

3EXTERNAL INTERFACE DESCRIPTION.................................................................................................................. 12

LEDS.......................................................................................................................................................................... 12

Connectors............................................................................................................................................................... 13

GPIO.............................................................................................................................................................. 13

Antennas .................................................................................................................................................................. 16

4CONFIGURATION USING THE WEB INTERFACE................................................................................................... 17

Introduction.............................................................................................................................................................. 17

NETWORK................................................................................................................................................................. 19

SYSTEM..................................................................................................................................................................... 20

RFID .......................................................................................................................................................................... 21

EASY2READ Configuration Options ............................................................................................................. 22

HID Configuration Options ........................................................................................................................... 25

EPC code parameters............................................................................................................................. 30

EXAMPLES.............................................................................................................................................. 33

CUSTOM Configuration Options .................................................................................................................. 34

INFO.......................................................................................................................................................................... 36

5EASY2READ PROFILE ............................................................................................................................................. 37

Introduction.............................................................................................................................................................. 37

Set the EASY2READ profile...................................................................................................................................... 37

EASY2READ configuration options .......................................................................................................................... 40

Connecting using the Ethernet port ........................................................................................................................ 41

Ethernet Communication Setup ................................................................................................................... 41

Easy Controller ............................................................................................................................................. 42

Connecting using the USB port................................................................................................................................ 44

USB Communication Setup........................................................................................................................... 44

Easy Controller ............................................................................................................................................. 45

Inventory on GPIO state change .............................................................................................................................. 47

6HID PROFILE............................................................................................................................................................ 49

Introduction.............................................................................................................................................................. 49

Set the HID profile.................................................................................................................................................... 49

HID configuration options........................................................................................................................................ 52

Connecting using the Ethernet port ........................................................................................................................ 53

Ethernet Communication Setup ................................................................................................................... 53

Connecting using the USB port................................................................................................................................ 53

USB Communication Setup........................................................................................................................... 53

7CUSTOM PROFILE................................................................................................................................................... 54

Introduction.............................................................................................................................................................. 54

Set the CUSTOM profile ........................................................................................................................................... 54

Configuration options .............................................................................................................................................. 57

Connecting using the Ethernet port ........................................................................................................................ 58

Ethernet Communication Setup ................................................................................................................... 58

Java Virtual Machine ................................................................................................................................................ 58

8RESET THE READER................................................................................................................................................ 60

9FIRMWARE UPGRADE ............................................................................................................................................ 61

10 TECHNICAL SPECIFICATIONS................................................................................................................................ 64

Technical Specification Table ................................................................................................................................... 64

Index - Quattro Technical Information Manual 5

11 CONNECTING TO RA0003 MULTIPLEXER............................................................................................................. 65

RA0003 Multiplexer ................................................................................................................................................. 65

Quattro R4321P –RA0003 Multiplexer Connection ................................................................................................ 66

12 REGULATORY COMPLIANCE ................................................................................................................................. 67

CE Compliance.......................................................................................................................................................... 67

FCC Compliance........................................................................................................................................................ 68

RoHS EU Directive .................................................................................................................................................... 68

Quattro R4321P CE Declaration of Conformity ....................................................................................................... 69

Quattro R4321P FCC Grant ...................................................................................................................................... 70

List of Figures

Fig. 1.1: Quattro reader (Model R4321P) .............................................................................................................................6

Fig. 1.2: Quattro R4321P Technical drawings: top view.......................................................................................................7

Fig. 3.1: LEDs....................................................................................................................................................................... 12

Fig. 3.2: Interfaces Panel .................................................................................................................................................... 13

Fig. 3.3: GPIO Connector .................................................................................................................................................... 13

Fig. 3.4: GPIO Input Signal .................................................................................................................................................. 14

Fig. 3.5: GPIO Output Signal............................................................................................................................................... 16

Fig. 3.6: Antennas ............................................................................................................................................................... 16

Fig. 4.1: Quattro R4321P Web Interface ............................................................................................................................ 18

Fig. 5.1: Quattro R4321P Web Interface ............................................................................................................................ 38

Fig. 6.1: Quattro R4321P Web Interface ............................................................................................................................ 50

Fig. 7.1: Quattro R4321P Web Interface ............................................................................................................................ 55

Fig. 11.1: RA0003 UHF Antenna Multiplexer...................................................................................................................... 65

Fig. 11.2: Quattro reader –RA0003 MUX Connection ....................................................................................................... 66

List of Tables

Tab. 1.1: Cylindrical-head self-tapping screw measures ......................................................................................................7

Tab. 3.1: LEDs ..................................................................................................................................................................... 12

Tab. 3.2: Interfaces Panel ................................................................................................................................................... 13

Tab. 3.3: GPIO Connector Poles ......................................................................................................................................... 14

Tab. 3.4: Antennas .............................................................................................................................................................. 16

Tab. 4.1: Conducted power ................................................................................................................................................ 23

Tab. 4.2: Conducted power ................................................................................................................................................ 26

Tab. 4.3: EPC Code parameters .......................................................................................................................................... 30

Tab. 4.4: Escape Sequences supported .............................................................................................................................. 31

Tab. 4.5: Conducted power ................................................................................................................................................ 35

Tab. 10.1: Technical Specifications..................................................................................................................................... 64

INTRODUCTION - Quattro Technical Information Manual 6

1INTRODUCTION

Product Description

The Quattro (Model R4321P) is a smart 4-port RAIN RFID long range reader of the easy2read©product line,

well suited for retail and warehousing installations.

The Quattro reader has 4 antenna ports capable of a 31.5 dBm maximum power enabling to build RAIN

RFID portals for long range reading. Its slim form factor makes it easy to install even when limited space is

available. It offers the Ethernet (PoE) and USB communication interface in order to simplify the installation

both on large and single read point installations. The Power over Ethernet capability permits to provide

power and to communicate with the reader with a single cable.

The USB host port, combined with the internal computing architecture, permits to connect USB peripherals

like barcode scanners, keyboards, printers and many others transforming the Quattro reader in a powerful

and versatile identification platform.

The Quattro is based upon an embedded Linux platform and it’s easily configurable using an internal web

interface. System integrators can customize the behaviour of the reader installing Java code that, having

access to all the RFID features and interfaces, permits a full customization.

The Quattro reader complies with and can operate in both European and US regulatory environments and,

due to its multiregional capabilities, it’s ideal for integration in devices requiring compliance to different

geographical regions.

Fig. 1.1: Quattro reader (Model R4321P)

Ordering Options

Code

Description

Reader

WR4321PXAAAA

R4321P Quattro - Smart 4-port Long Range RAIN RFID

Development

kit

WR4321PXDKEU

Quattro - ETSI Dev Kit including RFID antenna with cable,

power supply, and tag samples (reader not included)

WR4321PXDKUS

Quattro - FCC Dev Kit including RFID antenna with cable,

power supply, and tag samples (reader not included)

Accessories

WANTENNAX019

Circular polarized antenna 8.5dBc –ETSI

WANTENNAX020

Circular polarized antenna 8.5dBc –FCC

WALIM0000005

R4321P - Auxiliary Power Supply

INTRODUCTION - Quattro Technical Information Manual 7

Installation Notice

The Quattro R4321P reader could be mounted either horizontally or vertically. Locate the four mounting

slots on the reader, as illustrated in Fig. 1.2: Quattro R4321P Technical drawings: top view. In the four

mounting slots there are rubber gaskets to facilitate adherence to smooth surfaces.

All measurements are in millimetres.

Fig. 1.2: Quattro R4321P Technical drawings: top view

Wall fixing

A cylindrical-head self-tapping screw (not provided) with the following measures is recommended to fix the

reader directly to the wall:

where:

Parameter

Min value

Max value

Unit

100

Tab. 1.1: Cylindrical-head self-tapping screw measures

INTRODUCTION - Quattro Technical Information Manual 8

Fixing on Bosch Rexroth’s profile

One of the fastenings that are very requested in the industrial field is the possibility of mounting on Bosch

profiles. The 4 fixing slots of the Quattro R4321P reader are sized to facilitate this type of assembly.

An M8 screw with the respective M8 nut is required to fix the reader using Bosch profiles:

M8 nut

Bosch Rexroth’s profile

M8 screw

Note that these accessories are not provided with the reader.

GETTING STARTED - Quattro Technical Information Manual 9

2GETTING STARTED

Introduction

This quickstart guide will help you to get started with your Quattro (Model R4321P) reader.

The reader can be configured in three different profiles:

EASY2READ (factory default): choosing this option you select the CAEN RFID easy2read

communication protocol. Select this option in order to control the reader using the CAEN RFID

Easy Controller Application or the SDK (Software Development Kits) library. For details on the

use of the EASY2RD profile please refer to this quickstart guide.

HID: choosing this option you select the keyboard emulation protocol.

For details on the use of the HID profile please refer to § HID PROFILE chapter page 49.

CUSTOM: the use of this profile allows the user to upload their own scripts to the reader. For

details on the use of the CUSTOM profile please refer to § CUSTOM PROFILE chapter page 54.

The reader is sold with the factory profile set to EASY2READ. This guide helps you to getting started with

your reader using the EASY2READ profile.

For more detailed information on reader configuration, connections and setup options please refer to the

next chapters.

Connecting to the Quattro Reader using the Ethernet

port

Ethernet Communication Setup

The Quattro reader can be connected to a PC using an Ethernet cable. In order to correctly operate with

the reader follow the steps above:

1. Connect the antenna cable to Ant-0 (see § Fig. 3.6: Antennas page 16) of the reader.

2. Connect the Quattro to the power supply, the power LED will turn on, wait about 30 seconds until

you hear a beep, wait 10 seconds again and the reader is ready to work with the EASY2READ profile

active.

3. Plug an Ethernet cable1(not provided) into your computer and connect the other end of the

Ethernet cable to the reader. If your private network matches the default network configuration of

the reader (IP address 192.168.0.2) you can connect to it, otherwise you can:

a. change the network configuration of the reader (see § NETWORK page 19) to connect it to

your network

b. disconnect your PC from your network and connect it to the network of the reader.

Now you can use the CAEN RFID Easy Controller Application to control the reader.

1For proper operation of the device:

-Ethernet cable shall be CAT6 at least (type S/FTP or S/STP)

-Put two ferrites (P.N. RRC-13-7-23-M-K5B by RICHCO; CAEN RFID ordering code LFAAFFP00004) on the Ethernet cable,

near the reader connector.

GETTING STARTED - Quattro Technical Information Manual 10

Easy Controller

Follow these steps to connect the Quattro reader using the Easy Controller application for Windows:

1. Download the latest version of the Easy Controller software from the Quattro R4321P web page,

Downloads section and install it.

2. Launch the Easy Controller application:

3. On the main screen click on File →Connect. A Connection windows will open. Select the Connection

Type (TCP/IP Connection) and type the Quattro IP address into the TCP/IP Address box (default value

is 192.168.0.2). Then click on Connect:

Indice

Altri manuali caenrfid Lettore di codici a barre

caenrfid

caenrfid easy2read qID R1240IE Documento tecnico

Manuali Lettore di codici a barre popolari di altre marche

POSMicro

POSMicro Datalogic PowerScan D7100 Manuale utente

Marson

Marson MT780 Guida rapida alla configurazione

NCR

NCR RealPOS Manuale utente

Motorola

Motorola SE3300 Guida rapida alla configurazione

Element

Element P130BT Manuale utente

Motorola

Motorola Symbol LS3008 Manuale di installazione e funzionamento

Meec tools

Meec tools OBD-II / VAG Manuale utente

SICK

SICK CLP 100 Manuale utente

Royal Tag SA

Royal Tag SA I-Read Manuale utente

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuale utente

Meteor

Meteor 8310 Manuale utente

Denso

Denso BHT-500B Manuale utente

Datalogic

Datalogic Heron HD3130 Manuale utente

Motorola

Motorola MP6000 Istruzioni di montaggio

Newland

Newland NLS-HR15-BT Manuale utente

ARTDEV

ARTDEV AS-1310 Manuale utente

Aopos

Aopos AS290 Manuale utente

ENS

ENS 367-5455 Manuale utente

caenrfid Quattro R4321P Documento tecnico

Manuali Lettore di codici a barre popolari di altre marche