Caimore CM510-72F Manuale utente

厦门才茂通信科技有限公司

Xiamen Caimore Communication Technology Co.,Ltd

User Manual

CM510-62G & CM510-72F

This manual is suitable for:

Interface

Model

Terminal

CM510-62G

Terminal

CM510-72F

Xiamen Caimore Communication Technology Co.,Ltd

Add: 3F, 1st Building, 23# Wanghai Road, Xiamen

Tel：+86-592-3799895 Fax：0592-5975885 P：361009

Web：www.caimore.net Email:oversea@caimore.com

----

才茂通信通畅天下

----

厦门才茂通信科技有限公司

Xiamen Caimore Communication Technology Co.,Ltd

Statement

All contents included in this user manual are protected by copyright law, any organization

or person has no right to copy, reproduce and spread by any method, unless gets the written

authorization from Xiamen Caimore communication technology co.,Ltd.

Trademark：

Caimore and other Caimore brands are possessed by Xiamen Caimore communication

technology co.,Ltd. Other brands or registered brands mentioned in this page are possessed

by their owner.

Notice:

The file will be updated because of the unscheduled upgrade of products and other

reasons. Unless there are other agreement, the file is only used as the manual guide, the

information and suggestion included in this page do not constitute any express or implied

warranty.

厦门才茂通信科技有限公司

Xiamen Caimore Communication Technology Co.,Ltd

Catalog

1.1 Overview.........................................................................................................................................................1

1.2 Unpacking...................................................................................................................................................... 1

1.3 Cable Connection...........................................................................................................................................2

1.4 Power Supply................................................................................................................................................. 3

1.5 Detect The Network.......................................................................................................................................3

2.1 Local Configuration...................................................................................................................................... 4

2.1.1 Center Server Config........................................................................................................................5

2.1.2 PLC Connection Config................................................................................................................... 5

2.1.3 Device&Net Config........................................................................................................................... 6

2.1.4 Advance Config................................................................................................................................. 7

2.2 Remote Configuration...................................................................................................................................8

Annex I AT Command........................................................................................................................................9

Annex II Indicator Light...................................................................................................................................11

Annex III TCP Protocol....................................................................................................................................11

Annex IV UDP Protocol.................................................................................................................................... 12

Technical Support............................................................................................................................................. 13

厦门才茂通信科技有限公司

Xiamen Caimore Communication Technology Co.,Ltd

1. Installation

1.1 Overview

To meet the design function, DTU must be installed correctly. Usually, the installation

should be under the guidance of qualified engineer who is approved by Xiamen Caimore

communication technology co.,Ltd.

Notice：

Please install the DTU without power!

1.2 Unpacking

To ensure the safe transportation, DTU should be packed reasonably. Please keep the

package material when you open the box so as to use them again when before transporting

in the future.

The components of DTU：

One unit CAIMORE DTU

One power adapter

One companion CD-ROM

One dual-frequency vehicle-mounted antenna(SMA interface)

One 20Pin RS484 cable or one DB9 RS232 cross cable, selected by different

equipment

Optional accessories:

High power gain dual-frequency antenna (SMA interface)

Products guide rail

RS232 Direct connection line

Notice：

Please confirm that the accessories coincides with packing list when you open the

product box.

厦门才茂通信科技有限公司

Xiamen Caimore Communication Technology Co.,Ltd

1.3 Cable Connection

Terminal interface：

Definition of Interface:

NO.

Name

Function

Default Function

Input /

Output

Electrical

Characteristics

Power

Power supply + pole

Power supply range:

6V - 32V

GND

Power ground

485A

RS485

RS485 interface A

485B

RS485 interface B

RXD

RS232(used

to transmit

data,

configure or

download)

RS232 interface, receiver pin (assuming that

DTU is connected to the computer, the flow

direction of this pin is: DTU <- computer)

Input

TXD

RS232 interface, sender pin (assuming DTU is

connected to the computer, the data flow of this

pin is: DTU -> computer)

Output

GND

RS232

RS232 interface, GND pin

DRX

RS232(used

to debug)

RS232 interface, receiving pin

Input

DTX

RS232 interface, sending pin

Output

Enable pin

Input

When the input voltage

of 0V DTU power

supply is cut off; When

suspended or input high

level, DTU power is

connected.

IO1

Switch measure and control

Input &

Output

IO control, IO alarm

IO2

Input &

Output

IO control, IO alarm

IO3

Input &

Output

IO control, IO alarm

IO4

Input &

Output

IO control, IO alarm

厦门才茂通信科技有限公司

Xiamen Caimore Communication Technology Co.,Ltd

Please connect cable as picture showing:

1.4 Power Supply

The DTU model can be used in complex environment. Usually, the range of power

changes large. To adapt to complex application environment excellently and improve the

stability of system, the power supply adopts advanced power technology, and power

provided directly by external power supply transformer.

Notice:

When DTU changes information with base station, the instantaneous current changes

quickly and peak current is very large. So it requires higher quality of external power supply

transformer.

1.5 Detect The Network

Please connect the cable and ensure that it is correct, then connect antenna, put into a

valid SIM card and power the DTU, then the PWR indicator will light. If DTU connect to

network, the online indicator will flash. And it will normally light after connect to server. It

indicates that DTU works normally. When there is data transmission in user data interface,

the ACT lamp flashes.

厦门才茂通信科技有限公司

Xiamen Caimore Communication Technology Co.,Ltd

Notice:

Please confirm that antenna and serial port line connect DTU and SIM card has been

inserted before powering up.

2. Configuration

There are two configuration modes for DTU: local configuration and remote

configuration.

2.1 Local Configuration

1. Connect your computer and DTU via DEBUG interface.

2. Run the configuration tool “LPLC_CFGTOOL.exe”.

3. Choose Local Configuration:

4. Set the port to which one is used to connect your computer and DTU. Then click

Open.

厦门才茂通信科技有限公司

Xiamen Caimore Communication Technology Co.,Ltd

5. After that it will load settings.

2.1.1 Center Server Config

Description of Center Server Conf:

Name

Description

Notice

Center Server

Num

The number of server

The max number of server link is

different from model to model:

xx50 -- 8, xx60 -- 4

Center Server

Address

Set it to server’s IP address or domain name.

If there is no static IP for server,

please use domain name.

Center Port

Set it to server’s port which is used to communicate

with DTU.

2.1.2 PLC Connection Config

Description of PLC Connection Config:

Name

Description

Notice

Baudrate

Baud rate.

Please set these parameters as same as PLC’s.

Parity Bit

Parity bit.

Data Bit

Data bit.

Flow Control

Flow control.

厦门才茂通信科技有限公司

Xiamen Caimore Communication Technology Co.,Ltd

2.1.3 Device&Net Config

Description of Device&Net Config:

Name

Description

Notice

Device ID

A eight hex number for server to identify different

DTU.

Device ID is used in TCP mode.

Please make it sure that the number

is different from DTU to DTU.

Device SIM

Num

A eleven decimal number for server to identify

different DTU.

Mobile number is used in UDP

mode.

It is not necessarily to set mobile

number as same as SIM card

number.

Primary DNS

Address

If keep it in blank, it’ll use operator’s default DNS server

Backup DNS

Address

Wireless APN

Please fill these parameters according to information provided by operator.

APN User Name

APN Password

APN Center

Dial Number

SMS Center

Number

厦门才茂通信科技有限公司

Xiamen Caimore Communication Technology Co.,Ltd

2.1.4 Advance Config

Description of Advance Config:

Name

Description

Notice

Work Mode

There is only TCP mode available.

Debug Level

Different level debug information shown at Log page.

0=No info,

1=partial info,

2= the entire info

Packet Interval

The interval to receive data from serial port.

The unit is ms, range is 1~65535.

It is usually set as 200ms.

Reconnection

Times

When the number of times that DTU fails to reconnect

server over the value of this parameter, DTU will

reboot.

Range is 0~65535.

It better to set the parameter with a

small figure.

Reconnection

Interval

It is interval time of trying to connect server again

when DTU disconnect with center server.

The unit is second, range is

15~360.

Heart Packet

Interval

The interval to send heartbeat packet to sever

The unit is second, range is

15~360.

TCP Maximum

Transmission

Unit

The maximum transfer bytes during data transmission.

Range is 1~1450.

Automatic

Restart Time

When the device startup time reaches this value, the

device will restart automatically.

Unit: minutes. Range is 0~4320.

0 means disable this feature.

Application

Protocol

There are two mode available: Transport /

CaimoreProtocol

Registration

Packet

The packet used to register in server.

Heartbeat

Packets

When DTU has no data need to send to sever, it will

send heartbeat packet to serve to let server know this

device is online

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Caimore Terminale touch

Caimore

Caimore CM550-5 Series Manuale utente

Manuali Terminale touch popolari di altre marche

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Manuale utente

Ingenico

Ingenico AXIUM EX4000 Manuale utente

Heisei Electronics

Heisei Electronics Q-POS 815 Manuale utente

Amano

Amano MTX-15 Manuale utente

FLOWBIRD

FLOWBIRD CWT Compact Touch Manuale utente

Demco

Demco SP7 Manuale utente

Lathem

Lathem PC600 Series Manuale utente

Partner

Partner MF-2352 Manuale utente

NCR

NCR RealPOS 7460-2 Manuale

Simrad

Simrad MS50 Istruzioni per il montaggio

Unitech

Unitech MR350 MKII Guida rapida

Jungheinrich

Jungheinrich WMT 210 Manuale utente

Motorola

Motorola MTP850 Manuale utente

YASKAWA

YASKAWA 62H-MDC0 Manuale utente

MVG industries

MVG industries NeptuLink Manuale utente

Price Industries Limited

Price Industries Limited FDC Manuale di istruzioni

Honeywell

Honeywell TemaKey Manuale utente

EBN

EBN BPC65-B-A16G Manuale utente