CAMAG NANOMAT 4 Manuale utente

INSTRUCTION MANUAL

NANOMAT 4

Content

1Introduction.................................................................................................................................... 3

1.1 Parts supplied Nanomat 4 ......................................................................................................... 3

1.2 Parts supplied Capillary Dispenser System.................................................................................. 3

1.3 Accessories / Consumables / Spare parts ................................................................................... 3

2Unpacking/Installation .................................................................................................................. 4

2.1 Nanomat 4................................................................................................................................ 4

2.2 Capillary Dispenser System ........................................................................................................ 4

2.3 Dispenser magazine .................................................................................................................. 4

3Getting started ............................................................................................................................... 5

3.1 Positioning a TLC-/HPTLC plate or sheet .................................................................................... 5

3.2 Loading a capillary in the capillary holder .................................................................................. 5

3.3 Sample application.................................................................................................................... 6

4Maintenance................................................................................................................................... 7

Introduction

Instruction Manual, Oct-15 3

1Introduction

The CAMAG Nanomat 4 serves for easy application of samples onto TLC and HPTLC plates

or sheets, precisely positioned and without damage to the layer.

The actual sample dosage is performed with disposable capillaries which are precisely

guided by the Universal Capillary Holder.

The Capillary Dispenser serves for loading capillaries from dispenser magazines into the

holder.

1.1 Parts supplied Nanomat 4

Part no Description

022.4730

Nanomat 4

022.4732

Strips of marking sample position pkg. of 10

115.0122

Magnets rods (2)

B022.4730E

Instruction manual

1.2 Parts supplied Capillary Dispenser System

Part no Description

022.7650

Capillary dispenser (complete)

022.7786

Universal capillary holder

022.7661

Dispenser magazine for 1.0µL capillaries

022.7771

Capillary pipettes 1.0µL, pkg. of 5 x 100

1.3 Accessories / Consumables / Spare parts

Part no Description

022.7655

Capillary dispenser (without accessory)

022.7786

Universal capillary holder

022.7660

Dispenser magazine for 0.5 µL capillaries

022.7661

Dispenser magazine for 1.0 µL capillaries

022.7662

Dispenser magazine for 2.0 µL capillaries

022.7665

Dispenser magazine for 5.0 µL capillaries

022.7770

Capillary pipettes 0.5 µL, pack of 5 x 100

022.7771

Capillary pipettes 1.0 µL, pack of 5 x 100

022.7772

Capillary pipettes 2.0 µL, pack of 5 x 100

022.7775

Capillary pipettes 5.0 µL, pack of 5 x 100

022.4732

Strips of marking sample position pkg. of 10

022.7776

Ejection needle for capillary dispenser

Unpacking/Installation

Instruction Manual, Oct-15 4

2Unpacking/Installation

2.1 Nanomat 4

•Unpack the instrument and check the parts supplied

•Place the Nanomat on a flat, smooth surface

•Mount the positioning head in place

•Adjust the Y-coordinate for sample application (distance from lower edge of plate)

(1) and tighten screw (2)

•Place a marking strip (3) onto the base plate

Fig.1: Setting up Nanomat 4

2.2 Capillary Dispenser System

•Unpack the system and check the parts supplied.

•To your liking, you can place the dispenser unit either on its stand or on the base

plate of the Nanomat, it is held in place by a strong mag-net.

Fig.2: Setting up Capillary Dispenser Fig.3: Dispenser without Nanomat

2.3 Dispenser magazine

•Place the magazine on the table with its open side upwards

•Push the feeder slide to its end position and lock it by pressing it down

•Pull a belt with capillaries into the magazine the adhesive tape up-wards

•Make sure the capillary size corresponds with that of the magazine (color code)

Getting started

Instruction Manual, Oct-15 5

•Unlock the feeder slide by lifting its end up. The capillaries are now pushed against

the stop at the end

•Now pull the adhesive strip off

Fig.4-8: Setup of Dispenser Magazine

3Getting started

3.1 Positioning a TLC-/HPTLC plate or sheet

•Place a TLC/HPTLC plate or sheet onto the base plate. First push it flush against the

positioning pin at the side. Secure it in this position with the magnet strips

•Slide the applicator head to the desired position (notches 1-39 at 5 mm stops)

•For your convenience you can mark the positions of samples (standards and

unknowns) on the marking strip

3.2 Loading a capillary in the capillary holder

•Insert the magazine with the desired capillary size in the capillary dispenser

Getting started

Instruction Manual, Oct-15 6

•Push the Universal Capillary Holder into the dispenser opening until the magazine is

flush with the end of the guide rail

•Withdraw the capillary holder. It is now loaded with a capillary

Fig.9: Capillary holder in the capillary dispenser

3.3 Sample application

•Take your sample by dipping the capillary with the help of the holder into the

application solution

•Place the universal capillary holder against the applicator head, where it is held in

place by magnetic action

•Make sure that its positioning pin (1) engages in the slot of the applicator head

•Push down the lever (2) of the applicator head against its rest. The capillary touches

the layer with a constant pressure

•Hold the lever down until the capillary has completely emptied out

•Remove the capillary holder and eject the capillary by pressing the button at the top

of the holder

Fig.10: Sample application

Maintenance

Instruction Manual, Oct-15 7

4Maintenance

The Nanomat and the Capillary Dispenser System do not require any maintenance other

than keeping both clean.

CAMAG (Switzerland) · Sonnenmattstrasse 11 · CH-4132 Muttenz 1

Telephone +41 61 467 34 34 · Fax +41 61 461 07 02 · E-Mail: info@camag.com

CAMAG (Germany) · Bismarckstraße 27-29 · D-12169 Berlin

Telephone +49 30 516 55 50 · Fax +49 30 795 70 73 · E-Mail: infoberlin@camag.com

CAMAG Scientific Inc. (USA) · 515 Cornelius Harnett Drive · Wilmington, NC 28401

Telephone 800 334 3909 · Fax 910 343 1834 · E-Mail: [email protected]

www.camag.com

Notes:

__________________________________________________________________________________

Indice

Altri manuali CAMAG Attrezzature da laboratorio

CAMAG

CAMAG TLC-MS INTERFACE 2 Manuale utente

CAMAG

CAMAG ADC 2 Manuale utente

CAMAG

CAMAG Derivatizer Manuale utente

CAMAG

CAMAG DBS-MS 500 Manuale utente

CAMAG

CAMAG DBS-MS 500 Manuale utente

CAMAG

CAMAG LINOMAT 5 Manuale utente

CAMAG

CAMAG AMD 2 Manuale utente

CAMAG

CAMAG ADC 2 Manuale utente

CAMAG

CAMAG ATS 4 Manuale utente

CAMAG

CAMAG UV LAMP 4 Manuale utente

CAMAG

CAMAG TLC SPRAY CABINET 2 Manuale utente

Manuali Attrezzature da laboratorio popolari di altre marche

Qiagen

Qiagen DML 3000 Manuale utente

Queensgate

Queensgate NANOSCAN OP400 Manuale di programmazione

Conviron

Conviron GEN1000-GE Manuale utente

Parr Instrument

Parr Instrument 4560 Manuale di istruzioni

IKA

IKA IC control Manuale utente

Integra

Integra DOSE IT Manuale utente

Agilent Technologies

Agilent Technologies 5800 ICP-OES Manuale utente

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manuale utente

NI PXI-5422 Manuale

Collomix

Collomix Aqix Manuale utente

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manuale utente

Ocean Insight

Ocean Insight FLAME-NIR+ Manuale utente

Parker

Parker ALIGN-MG-NA Manuale utente

BD 644787 Manuale utente

DENTAURUM

DENTAURUM Compact Megaplus Manuale utente

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manuale utente

VWR

VWR SAS Super IAQ Manuale utente

illumina

illumina MiSeqDx Manuale utente