Campbell 092 Manuale utente

Model 092

Barometric Pressure Sensor

6/12

Campbell Scientific, Inc.

Warranty

“PRODUCTS MANUFACTURED BY CAMPBELL SCIENTIFIC, INC. are

warranted by Campbell Scientific, Inc. (“Campbell”) to be free from defects in

materials and workmanship under normal use and service for twelve (12)

months from date of shipment unless otherwise specified in the corresponding

Campbell pricelist or product manual. Products not manufactured, but that are

re-sold by Campbell, are warranted only to the limits extended by the original

manufacturer. Batteries, fine-wire thermocouples, desiccant, and other

consumables have no warranty. Campbell's obligation under this warranty is

limited to repairing or replacing (at Campbell's option) defective products,

which shall be the sole and exclusive remedy under this warranty. The

customer shall assume all costs of removing, reinstalling, and shipping

defective products to Campbell. Campbell will return such products by surface

carrier prepaid within the continental United States of America. To all other

locations, Campbell will return such products best way CIP (Port of Entry)

INCOTERM® 2010, prepaid. This warranty shall not apply to any products

which have been subjected to modification, misuse, neglect, improper service,

accidents of nature, or shipping damage. This warranty is in lieu of all other

warranties, expressed or implied. The warranty for installation services

performed by Campbell such as programming to customer specifications,

electrical connections to products manufactured by Campbell, and product

specific training, is part of Campbell’s product warranty. CAMPBELL

EXPRESSLY DISCLAIMS AND EXCLUDES ANY IMPLIED

WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE. Campbell is not liable for any special, indirect,

incidental, and/or consequential damages.”

Assistance

Products may not be returned without prior authorization. The following

contact information is for US and international customers residing in countries

served by Campbell Scientific, Inc. directly. Affiliate companies handle

repairs for customers within their territories. Please visit

www.campbellsci.com to determine which Campbell Scientific company serves

your country.

To obtain a Returned Materials Authorization (RMA), contact CAMPBELL

SCIENTIFIC, INC., phone (435) 227-9000. After an applications engineer

determines the nature of the problem, an RMA number will be issued. Please

write this number clearly on the outside of the shipping container. Campbell

Scientific's shipping address is:

CAMPBELL SCIENTIFIC, INC.

RMA#_____

815 West 1800 North

Logan, Utah 84321-1784

For all returns, the customer must fill out a "Statement of Product Cleanliness

and Decontamination" form and comply with the requirements specified in it.

The form is available from our web site at www.campbellsci.com/repair. A

completed form must be either emailed to repair@campbellsci.com or faxed to

(435) 227-9106. Campbell Scientific is unable to process any returns until we

receive this form. If the form is not received within three days of product

receipt or is incomplete, the product will be returned to the customer at the

customer's expense. Campbell Scientific reserves the right to refuse service on

products that were exposed to contaminants that may cause health or safety

concerns for our employees.

092 Table of Contents

PDF viewers: These page numbers refer to the printed version of this document. Use the

PDF reader bookmarks tab for links to specific sections.

1. Introduction..................................................................1

2. Cautionary Statements................................................1

3. Initial Inspection ..........................................................1

4. Quickstart.....................................................................1

4.1 Installation ................................................................................................1

4.2 Programming with Short Cut....................................................................3

5. Overview.......................................................................6

6. Specifications ..............................................................7

7. Installation....................................................................7

7.1 Mounting ..................................................................................................7

7.2 Wiring.......................................................................................................8

7.3 Programming ............................................................................................8

8. Maintenance .................................................................9

8.1 Cleaning....................................................................................................9

8.2 Calibration ................................................................................................9

Appendices

A. Analog Output Configurations............................... A-1

B. Wiring ....................................................................... B-1

C. CE Certification ....................................................... C-1

Figures

4-1. 092 installed on a vertical mast ...............................................................2

B-1. Analog wiring .....................................................................................B-1

092 Table of Contents

Tables

7-1. Connecting the 092 to Campbell Scientific Dataloggers........................ 8

A-1. Dip Switches SW1: Analog Output Voltage Settings........................ A-1

A-2. Dip Switches SW2: Analog Output Pressure Range Settings ........... A-2

Model 092 Barometric Pressure Sensor

1. Introduction

The Model 092 Barometric Pressure Sensor is designed to measure ambient

atmospheric pressure and is configured at Campbell Scientific for analog

output. It is recommended for wind farm power performance research.

2. Cautionary Statements

•Install the sensor such that it faces North in the Northern Hemisphere, or

South in the Southern Hemisphere. This orientation will shield the

polycarbonate sensor housing from most direct sunlight.

•The pressure sensor element is light sensitive. Only operate the 092 when

the polycarbonate case is closed.

•Pressure conditions in the range of 10 to 10,000 millibars will not harm the

sensor, but the measurement accuracy is not guaranteed beyond the range

of 600 to 1100 millibars.

3. Initial Inspection

•Upon receipt of the 092, inspect the packaging and contents for damage.

File damage claims with the shipping company, but contact Campbell

Scientific to arrange for repair or replacement.

•The model number and cable length are printed on a label at the

connection end of the cable. Check this information against the shipping

documents to ensure the expected product and cable length are received.

4. Quickstart

4.1 Installation

Please review Section 7, Installation for complete guidelines.

To install the 092:

1. The 092 enclosure is pre-supplied with desiccant and does not need to be

opened.

2. Attach the 092 to the tripod or tower leg using the supplied U-bolts.

Figure 4-1 shows the 092 installed on a vertical mast.

Model 092 Barometric Pressure Sensor

FIGURE 4-1. 092 installed on a vertical mast

Individual wire leads connect to the CR1000 datalogger as shown in step 5 of

the procedure in Section 4.2, Programming with Short Cut. A more

generalized wiring diagram is provided in Section 7.2, Wiring.

Model 092 Barometric Pressure Sensor

4.2 Programming with Short Cut

Short Cut Program Generator for Windows can be used to program the

CR1000 datalogger to measure the 092 as outlined in the following procedure.

Short Cut can also program other 092 compatible Campbell Scientific

dataloggers.

1. Open Short Cut and click on New Program.

2. Select a scan interval.

Model 092 Barometric Pressure Sensor

3. Select 092 Barometric Pressure Sensor and click the right arrow to add

it to the list of sensors to be measured.

4. Define the name of the public variable, or use the default BP_mmHg to

hold the barometric pressure measurement. Select the desired units of

measure, or use the default mmHg.

Indice

Altri manuali Campbell Accessori

Campbell

Campbell 61302V Manuale utente

Campbell

Campbell CS125 Manuale utente

Campbell

Campbell CS475 Manuale utente

Campbell

Campbell LWS-L Manuale utente

Campbell

Campbell 229 Manuale utente

Campbell

Campbell 253 Manuale utente

Campbell

Campbell CS505 Manuale utente

Campbell

Campbell Hydrosense Manuale utente

Campbell

Campbell KH20 Manuale utente

Campbell

Campbell SnowVUE 10 Manuale utente

Campbell

Campbell Apogee Instruments CS310 Manuale utente

Campbell

Campbell CS106 Manuale utente

Campbell

Campbell Met One 014A Manuale utente

Campbell

Campbell 4-Channel Current/Voltage SDM-CVO4 Manuale utente

Campbell

Campbell CS100 Manuale utente

Campbell

Campbell CS505 Manuale utente

Campbell

Campbell CS120A Manuale utente

Campbell

Campbell SR50 Manuale utente

Campbell

Campbell CS100 Manuale utente

Campbell

Campbell BlackGlobe Manuale utente

Campbell

Campbell RainVUE SDI-12 Series Manuale utente

Campbell

Campbell CS511 Manuale utente

Campbell

Campbell 10162 Manuale utente

Campbell

Campbell MetSENS Series Manuale utente

Manuali Accessori popolari di altre marche

Hillco

Hillco 2810 Manuale utente

Siemens

Siemens QSA2700D Manuale dell'operatore

Contours

Contours ZY024 Manuale utente

Saivod

Saivod VS621 Manuale utente

Virtuox

Virtuox VirtuCLEAN 2.0 Manuale utente

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuale utente

Z-Wave

Z-Wave HSD-200Z Manuale utente

turck

turck FMX-IM-2UPLI63FX Manuale utente

Decagon Devices

Decagon Devices 10HS Manuale utente

UPPAbaby

UPPAbaby Cup Holder Manuale utente

Elko

Elko SmartSensor Leakage Wireless Manuale utente

Grizzly

Grizzly H8371 Manuale utente

Panasonic

Panasonic HG-T Series Manuale utente

IFM Electronic

IFM Electronic Efector 250 Series Guida di riferimento

DigiDesign

DigiDesign 888/24 I/O Manuale utente

PROZIS

PROZIS QUAY Manuale utente

patagonia

patagonia PSI Vest Manuale utente

SFC Energy

SFC Energy EFOY GO! Manuale utente