Canon PIXMA MX452 Manuale utente

PIXMA MX450

Setup Guide

series

Setup Guide

This guide provides information for setting up a network connection for the printer.

Wireless Connection

Preparation for Connection

Printer Setup

Setup Procedure Selection

Push Button Method

WPS

Troubleshooting

Wireless Connection

aPreparation for Connection

Before Starting Wireless Connection Setup

1. Make sure that the printer is turned on.

If the power is on, the ON button (A) will be lit.

Notes on Wireless Connection

Make sure that the computer is connected to the access point (A) (or wireless network router) you want to connect your

printer to. For details on how to check the settings, refer to the manual supplied with the router or contact its manufacturer.

The con guration, router functions, setup procedures and security settings of the network device vary depending on your

system environment. For details, refer to the manual of your network device or contact its manufacturer.

Check if your device supports IEEE802.11n (2.4 GHz), IEEE802.11g or IEEE802.11b.

If your device is set to the "IEEE802.11n only" mode, WEP or TKIP cannot be used as a security protocol. Change the

security protocol for your device to something other than WEP and TKIP or change the setting to something other than

"IEEE802.11n only."

For of ce use, consult your network administrator.

Take added care when connecting to a network that is not protected with security measures, as there is a risk of disclosing

data such as your personal information to a third party.

An "Ad-hoc connection," which establishes a direct connection to the computer over a wireless connection without an

access point, is not supported. Be sure to prepare an access point.

bPrinter Setup

1. Press the Setup button (A) on the printer.

2. Use the or button (A) to select Device settings.

3. Press the OK button (B).

•

4. Select LAN settings.

5. Press the OK button.

6. Select Wireless LAN setup.

7. Press the OK button.

The (blue) Wi-Fi lamp (A) lights up when wireless connection is enabled.

cSetup Procedure Selection

The printer will automatically search for access points supporting WPS.

Push Button Method → d-A WPS → d-B

d-A Push Button Method

dConnection Using WPS

1. Press and hold the WPS button on the access point.

For details on pressing the WPS button, refer to the access point manual.

2. Press the OK button on the printer within 2 minutes.

The (blue) Wi-Fi lamp on the printer ashes while searching for or connecting to the access point.

3. When the left screen appears, press the OK button.

4. Press the COPY button (A).

The network connection setup is now complete.

d-B WPS

dConnection Using WPS

1. Select WPS.

2. Press the OK button.

3. Select Push button method.

4. Press the OK button.

5. Press and hold the WPS button on the access point.

For details on pressing the WPS button, refer to the access point manual.

6. Press the OK button on the printer within 2 minutes.

The (blue) Wi-Fi lamp on the printer ashes while searching for or connecting to the access point.

7. When the left screen appears, press the OK button.

8. Press the COPY button (A).

The network connection setup is now complete.

Troubleshooting

WPS

Multiple APs detected

The screen appears when connections are being attempted from multiple access points simultaneously. Wait for a

while, then congure WPS settings again. Press the WPS button on only one access point.

Failed to connect

The screen appears when an error occurs.

Check the access point settings, then congure WPS settings again.

For details on how to check the settings of the access point, refer to the manual supplied with the access point or

contact its manufacturer.

Timeout error

The screen appears when WPS setup was not completed within a specied time.

Is the network device (router, etc.) turned on? If the network device is already turned on, turn it off, then turn it back

on.



•

Altri manuali per PIXMA MX452

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Canon Stampante tutto in uno

Canon

Canon imageCLASS D320 Manuale

Canon

Canon PIXMA MX860 series Manuale utente

Canon

Canon 3743B002 Guida utente

Canon

Canon PIXMA MP500 Manuale utente

Canon

Canon MG5700 Series Guida all'installazione

Canon

Canon MF657Cdw Manuale utente

Canon

Canon PIXMA MP170 Manuale utente

Canon

Canon Pixma MG2500 Series Guida all'installazione

Canon

Canon PIXMA MG5620 Manuale utente

Canon

Canon imageRUNNER ADVANCE 500i Guida utente

Canon

Canon imageRunner Advance 6255 Manuale utente

Canon

Canon i-SENSYS MF6180dw Manuale utente

Canon

Canon SmartBase MPC400 Manuale di istruzioni

Canon

Canon Perfect Binder A1 Manuale utente

Canon

Canon imageRUNNER ADVANCE C355P Manuale utente

Canon

Canon imageCLASS MF5950dw Istruzioni per l'installazione

Canon

Canon PIXMA MP470 Manuale utente

Canon

Canon PIXMA MX310 series Manuale utente

Canon

Canon MX470 Guida all'installazione

Canon

Canon iR2030 Manuale utente

Canon

Canon iR2020 Series Manuale utente

Canon

Canon PIXMA MP620 series Manuale utente

Canon

Canon PIXMA MX712 Manuale utente

Canon

Canon iR6570 series Manuale utente

Manuali Stampante tutto in uno popolari di altre marche

Triumph Adler

Triumph Adler DC 2016 Manuale

Epson

Epson WorkForce WF-2510 Guida utente

Epson

Epson Stylus Scan 2000 Manuale di installazione e funzionamento

Epson

Epson PictureMate Snap PM 240 Manuale di istruzioni

Konica Minolta

Konica Minolta bizhub C35 Manuale utente

Brother

Brother MFC-J430w Manuale utente

Konica Minolta

Konica Minolta BIZHUB 558 Manuale utente

Lexmark

Lexmark MX710 Series Manuale

Brother

Brother MFC-9760 Manuale utente

Lexmark

Lexmark XC8155 Manuale utente

Lexmark

Lexmark X642E Manuale utente

Sharp

Sharp MX-2310U Guida

Aficio

Aficio 200 Manuale utente

Ricoh

Ricoh Pro C900 Manuale utente

Lexmark

Lexmark X925 Manuale utente

Brother

Brother Business Smart MFC-J4510dw Manuale utente

Epson

Epson Stylus CX8400 Series Manuale utente

Oce

Oce VarioLink 5022 Manuale utente