Canon PowerShot G7X Manuale utente
CEL-SV5TA210
ENGLISH
Getting Started
2
Package Contents
Before use, make sure the following items are included in the package.
If anything is missing, contact your camera retailer.
Camera Battery Pack
NB-13L*1
Battery Charger
CB-2LHE Wrist Strap*2
*1 Do not peel off the battery pack label.
*2 For attachment instructions, refer to the Camera User Guide that can be
downloaded from the Canon website.
●Printed matter is also included.
●A memory card is not included.
Compatible Memory Cards
No memory card is included. Purchase one of the following kinds of card
as needed. These memory cards can be used, regardless of capacity. For
details on the number of shots and recording time per memory card, see
“Specifications” in the downloadable Camera User Guide.
●SD memory cards*1
●SDHC memory cards*1*2
●SDXC memory cards*1*2
*1 Cards conforming to SD standards. However, not all memory cards have been
verified to work with the camera.
*2 UHS-I memory cards are also supported.
3
Manuals and Software
You can download manuals and software from the following
URL.
http://www.canon.com/icpd/
●With a computer connected to the Internet, access the above URL.
●Access the site for your country or region.
●Adobe Reader is required to view the manuals.
●You can also download software from the website. For instructions
on downloading and installing the software, refer to the Camera User
Guide available for download.
Initial Preparations
Charging the Battery Pack
1 Insert the battery pack.
zAfter aligning the Smarks on the battery
pack and charger, insert the battery pack
by pushing it in (1) and down (2).
2 Charge the battery pack.
zPlug the power cord into the charger,
then plug the other end into a power
outlet.
zThe charging lamp turns orange, and
charging begins.
zWhen charging is finished, the lamp turns
green. Remove the battery pack.
zFor details on charging time and the
number of shots or recording time
available with a fully charged battery
pack, refer to “Specifications” in the
downloadable Camera User Guide.
(1)
(2)
4
Initial Preparations
Inserting the Battery Pack and Memory Card
1 Open the cover.
zSlide the switch (1) and open the cover (2).
2 Insert the battery pack.
zHolding the battery pack with the
terminals (1) facing as shown, press the
battery lock (2) in the direction of the
arrow and insert the battery pack until the
lock clicks shut.
zIf you insert the battery pack facing the
wrong way, it cannot be locked into the
correct position. Always confirm that the
battery pack is facing the right way and
locks when inserted.
zTo remove the battery pack, press the
battery lock in the direction of the arrow.
3 Check the card’s write-protect tab
and insert the memory card.
zRecording is not possible on memory
cards with a write-protect tab when the
tab is in the locked position. Slide the tab
to the unlocked position.
zInsert the memory card with the label (1)
facing as shown until it clicks into place.
zTo remove the memory card, push it in
until you feel a click, and then slowly
release it.
(2)
(1)
(1)(2)
(1)
5
Initial Preparations
4 Close the cover.
zLower the cover (1) and hold it down as
you slide the switch, until it clicks into the
closed position (2).
Setting the Date and Time
1 Turn the camera on.
zPress the ON/OFF button.
zThe [Date/Time] screen is displayed.
2 Set the date and time.
zPress the [q][r] buttons to choose an
option.
zPress the [o][p] buttons or turn the [7]
dial to specify the date and time.
zWhen finished, press the [m] button.
(1)
(2)
6
Initial Preparations
3 Specify your home time zone.
zPress the [q][r] buttons to choose your
home time zone.
zPress the [m] button when finished.
After a confirmation message, the setting
screen is no longer displayed.
zTo turn off the camera, press the ON/OFF
button.
Changing the Date and Time
To adjust the date and time once you have set it, do the following.
1 Press the [n] button.
2 Move the zoom lever to choose the [3] tab.
3 Press the [o][p] buttons or turn the [7] dial to choose [Date/
Time], and then press the [m] button.
4 Follow step 2 in “Setting the Date and Time” to adjust the settings.
5 Press the [n] button.
Display Language
Change the display language as needed.
1 Enter Playback mode.
zPress the [1] button.
2 Access the setting screen.
zPress and hold the [m] button, and then
immediately press the [n] button.
zPress the [o][p][q][r] buttons or turn
the [7] dial to choose a language, and
then press the [m] button.
7
Trying the Camera Out
Shooting
For fully automatic selection of the optimal settings for specific scenes,
simply let the camera determine the subject and shooting conditions.
1 Turn the camera on and enter
[ ] mode.
zPress the ON/OFF button.
2 Compose the shot.
zTo zoom in and enlarge the subject, move
the zoom lever toward [i] (telephoto) as
you watch the screen, and to zoom away
from the subject, move it toward [j]
(wide angle).
3 Shoot.
Shooting Still Images
zPress the shutter button lightly (1).
zThe camera beeps twice after focusing,
and AF frames are displayed to indicate
image areas in focus. Press the shutter
button all the way down (2).
zIf [Raise the flash] appears on the screen,
move the [h] switch to raise the flash. It
will fire when shooting. If you prefer not
to use the flash, push it down with your
finger, into the camera.
Shooting Movies
zPress the movie button to start shooting,
and press it again to stop.
(1) (2)
8
Trying the Camera Out
Viewing
1 Enter Playback mode.
zPress the [1] button.
2 Browse through your images.
zTo view the previous or next image, press
the [q][r] buttons or turn the [7] dial.
zMovies are identified by a [ ] icon.
To play movies, go to step 3.
3 Play movies.
zPress the [m] button to access the movie
control panel, choose [ ] (either press
the [q][r] buttons or turn the [7] dial),
and then press the [m] button again.
zPlayback now begins, and after the movie
is finished, [ ] is displayed.
zTo adjust the volume, press the [o][p]
buttons.
Erasing Images
To erase the image you chose in step 2, do the following. Note that erased
images cannot be recovered.
1 Press the [a] button.
2 After [Erase?] is displayed, press the [q][r] buttons or turn the
[7] dial to choose [Erase], and then press the [m] button.
To ensure proper operation of this product, use of genuine Canon accessories
is recommended.
- Interface Cable IFC-400PCU
- Stereo AV Cable AVC-DC400ST
- HDMI cable (camera end: Type D): Use a commercially available cable no
longer than 2.5 m.
9
PC2155 WM223
© CANON INC. 2014
Altri manuali per PowerShot G7X
2
Indice
Altri manuali Canon Macchina fotografica digitale
Canon
Canon POWERSHOT S5IS Manuale utente
Canon
Canon 2807B005 Manuale utente
Canon
Canon EOS Rebel SL2 Guida all'installazione
Canon
Canon EOS C500 Mark II Manuale utente
Canon
Canon II B Guida
Canon
Canon PowerShot G12 Guida all'installazione
Canon
Canon PowerShot S100 DIGITAL ELPH Manuale utente
Canon
Canon EOS 70D (W) Manuale utente
Canon
Canon ELPH 2 IXUS II Manuale utente
Canon
Canon Super 8 Manuale utente
Canon
Canon PowerShot S5 IS Manuale utente
Canon
Canon PowerShot S30 Manuale utente
Canon
Canon EOS Rebel T5 Manuale utente
Canon
Canon 3635B001 - PowerShot S90 Digital Camera Manuale utente
Canon
Canon T 70 Manuale utente
Canon
Canon PowerShot G7 Guida utente
Canon
Canon PowerShot SX210 IS Manuale utente
Canon
Canon PowerShot ELPH 520 HS Manuale utente
Canon
Canon PowerShot A480 Manuale utente
Canon
Canon EOS 1200D Manuale utente
