Canon Inner Finisher Additional Tray-A1 Manuale di riferimento

(1/2)

Canon Service Bulletin COPIER

Issued by Canon Europa N.V.

Location:

OPTION TRAY ASSEMBLY

Subject:

Preventing additional finisher tray from being detached

Detaile:

The additional finisher tray is detached/The error code E540 is indicated

<Cause>

The additional finisher tray lifts the slide guide when coming up. At this time the slide guide inclines, and is

warped toward the direction A (see the photo below) together with the upper height panel. Due to this, the

additional finisher tray comes free from the L-shape rim of the slide guide and gets on the rim.

As a result, the additional finisher tray bumps into the slide guide when coming down, leading to detachment

of the additional finisher tray or the error code E540-0001 (upper tray ascent/descent motor clock error).

F-1

Model:

Additional Finisher Tray-A1

Ref No.:

Acc-397

(F3-T01-00W-10027-01)

Date:

25-06-04

[1] Additional Finisher Tray

[2] Slide Guide

[3] Upper Height Panel

Acc-397

(2/2)

The slide guide stopper to prevent the upper height panel from being warped is included with the additional

finisher tray A1 product.

(Attach the slide guide stopper when installing the additional finisher tray A1.)

Service Work:

Attach the slide guide stopper to the finisher frame when either of the foregoing symptoms occurs. For attaching

procedure, see the attached file "Slide Guid Stopper Installation Procedure".

F-2

Service Parts:

Affected Machines:

JLE01606 and later

[1] Slide Guide Stopper

[2] Finisher Frame

Description Part Number Q'ty I.C. P.C.

Old

New Stopper, Guide,

Slide FC5-6994-000 0->1 Q17

Slide Guid Stopper Installation Procedure

1) In the case of the Finisher-Q1/R1, open the front

door [1], remove the 3 screws [2], and detach the

front cover [3].

2) In the case of the Saddle Finisher-Q2/R2, open

the front cover [1].

3) In the case of the Finisher-Q1/R1, remove the 3

screws [1], and detach the rear cover [2].

4) In the case of the Saddle Finisher-Q2/R2, detach

the cable cover [1], remove the 6 screws [2], and

detach the rear cover [3].

5) Remove the 2 screws [1], and open the upper

cover of the finisher; then, detach the upper left

cover [3] as if to pull out the claw [2].

6) Remove the screw [1], and detach the slide guide

stopper [2]; then, slide the slide guide [3] upward to

detach. The removed slide guide stopper will not be

used later.

7) Before mounting the slide guide, which is

contained in the carton box, on the finisher, place

the lubricant (permanent lubricant G2) [1] at five

points on the slide guide and spread it over the slide

guide. (The locations for lubricant application are

indicated in [2] in the slide guide.)

8) Wipe off the extra lubricant with lint-free paper,

so that only a slight amount of lubricant is left on

the surface.

! If you fail to completely wipe off the extra

lubricant, it may adhere to copy paper.

9) Slide-in the slide guide from top to the finisher.

10) Peel off the liner from the double-faced tape [2]

adhered to the supplied slide guide stopper [1] at

two positions.

11) Using the screw (RS tight, M3 x 8) [3] removed

in step 6, install the slide guide stopper.

12) Mount the upper left cover, rear cover, and front

cover (in the case of the Finisher-Q1/R1) of the

finisher.

Altri manuali per Inner Finisher Additional Tray-A1

Altri manuali Canon Accessori per stampanti

Canon

Canon BH-10 Manuale utente

Canon

Canon Paper Folding Unit-J1 Manuale utente

Canon

Canon Saddle Finisher-T2 Manuale utente

Canon

Canon Two-Knife Booklet Trimmer-A1 Manuale utente

Canon

Canon Decurler Unit-C1 Manuale utente

Canon

Canon BW PCL PRINTER KIT-J1 Manuale operativo e di manutenzione

Canon

Canon Finisher-R1 Manuale operativo e di manutenzione

Canon

Canon MF9100 Series Manuale utente

Canon

Canon Cassette Feeding Unit-AP1 Manuale utente

Canon

Canon IMAGEPROGRAF 230GSM Manuale utente

Canon

Canon Remote FAX Kit-A1 Manuale utente

Canon

Canon Super G3 FAX board-AL1 Manuale utente

Canon

Canon Additional Finisher Tray-C1 Manuale utente

Canon

Canon Inner Finisher-D1 Manuale operativo e di manutenzione

Canon

Canon Duplex Color B1 Manuale utente

Canon

Canon Super G3 FAX Board-AH1 Manuale utente

Canon

Canon IPF600 Manuale utente

Canon

Canon Color Network UFR Printer Kit-C1 Manuale utente

Canon

Canon Duplex Unit-A1 Manuale utente

Canon

Canon Finisher-R1 Manuale utente

Canon

Canon Multi Function Professional Puncher-A1 Manuale utente

Canon

Canon Cassette Heater Unit 27 Manuale utente

Canon

Canon INNER 2-WAY TRAY-E1 Manuale operativo e di manutenzione

Canon

Canon CLI-521BK Manuale utente

Manuali Accessori per stampanti popolari di altre marche

Star Micronics

Star Micronics TSP800 Series Manuale utente

REA

REA JET HR pro 2K Manuale utente

HP Laserjet,Color Laserjet 4si Manuale utente

oliser

oliser MS 45 Manuale utente

Roland

Roland DU2-64 Istruzioni e ricette

Xerox

Xerox EFI EXP6000 Manuale utente

Sharp

Sharp FO-1MK Manuale utente

Labelmate

Labelmate PM-300 Manuale utente

Epson

Epson T6248 Manuale operativo

Epson

Epson OT-BZ20 Manuale utente

Ricoh

Ricoh LCIT RT5100 Guida rapida

GBC

GBC 16 Series Manuale utente

Develop

Develop SD-509 Manuale utente

Kyocera

Kyocera KM-6230 Manuale

Triumph Adler

Triumph Adler DF-710 Manuale

Citizen

Citizen CBM-202PC Series Manuale utente

Codonics

Codonics Virtua 1VCX-LR833 Guida di riferimento

TonerRefillKits

TonerRefillKits ReChargX RX126 Manuale utente