Canon Color Network Printer Unit-D1 Manuale operativo e di manutenzione
接続機器にPSプリントサーバユニット-D1を取り付ける際はこの手順に従って下さい。
image PASS-D1/Color Network Printer Unit-D1
Installation Procedure
Follow the instructions herein when installing the image PASS-D1/Color Network Printer Unit-
D1 to its host machine. ENGLISH
PSプリントサーバユニット-D1
設置手順書
日本語
FRANÇAIS
DEUTSCH
ITALIANO
Module Imprimante Couleur reseau-D1 Procédure
d’Installation
Suivre les instructions suivantes pour l’installation de Module Imprimante Couleur reseau-D1.
Farbdruckerkarte D1 Installation
Beachten Sie bitte bei der Installation der Farbdruckerkarte D1 in die Hosteinheit die Anleitungen.
Unità D-1 Stampante di rete a colori Procedura di
installazione
Seguire le istruzioni qui di seguito durante l’installazione Unità D-1 Stampante di rete a colori
alla macchina host corrispondente.
F-IM-6262-020cover.p65 04/04/20, 12:03Page 1 AdobePageMaker6.5J/Win
– 2 –
imagePASS-D1/Color Network Printer
Unit-D1 Installation Procedure
Follow the instructions in this booklet when installing the imagePASS-D1/Color Network Printer Unit-D1 to its
host machine.
1 Checking the Contents
Fig. 1-1
[1] Unit ............................................................ 1 pc.
[2] Open I/F PCB ............................................. 1 pc.
[3] Communications cable ............................... 1 pc.
[4] Power cable ................................................. 1 pc.
[5] Cross Ethernet cable ................................... 1 pc.
[6] Cable clamp ................................................ 4 pc.
[7] Stepped screw ............................................. 2 pc.
[8] RS tightening screw (w/ washer) ................ 4 pc.
[5] [6] [7] [8]
[1] [2] [3] [4]
F-IM-6262-020e.p65 04/04/20, 17:40Page 2 AdobePageMaker6.5J/Win
– 3 –
2 Installation
2.1 Before Starting the Work
• Host Machine’s Service Mode
Make the following selections in service mode, and
set the item to ‘3’: COPIER>OPTION>INT-
FACE>IMAGE-CONT (so that the IP address used
for communication between host machine and the
server unit will automatically be set up).
• Make sure that the site of installation meets the fol-
lowing spatial requirements:
Fig. 2-1
2.2 Installing to the Host Machine
Before stating the work, be sure to go
through the following in strict order on
the host machine:
1. turn off the control panel power
switch.
2. turn off the main power switch.
3. disconnect the power cable (of the
wall outlet).
Fig. 2-2
1) Open the cable clamp [1] of the host machine’s up-
per rear cover.
2) Disconnect the connector [2], and disconnect the
DDIS cable [3].
Fig. 2-3
3) Remove the 7 screws [1], and detach the upper rear
cover [2].
Fig. 2-4
20 cm min.
(rear)
Machine
(front)
Host machine
[1]
[2]
OFF
OFF
[3] Disconnect
[1]
[2]
[3]
[2]
[1]
[1]
[1]
[2]
F-IM-6262-020e.p65 04/04/20, 17:40Page 3 AdobePageMaker6.5J/Win
–4 –
4) Remove the 12 screws [1], and detach the control-
ler box cover [2].
Fig. 2-5
5) Mount the open I/F PCB.
• If the Host Machine Is Not Equipped with a UFR
Board
Remove the 2 screws [1], and detach the face plate [2]
shown in the figure. (You will be using the removed
screws [1] in the next step.)
Fig. 2-6
• If the Host Machine Is Equipped with a UFR Board
Remove the 2 screws [1], and detach the UFR board
[2]. (You will be using the removed screws [1] in the
next step.)
Hand over the removed UFR board to
the user for storage.
Fig. 2-7
6) Using the removed screws, mount the included open
I/F PCB [1] in the slot [2].
Fig. 2-8
[1]
[2]
[1]
[1]
[1]
[1]
[2]
[1]
[2]
[1]
[2]
F-IM-6262-020e.p65 04/04/20, 17:40Page 4 AdobePageMaker6.5J/Win
–5 –
7) Mount the controller box cover [2] using 12 screws
[1].
Fig. 2-9
8) Fit the 2 cable clamps [1] each to the removed up-
per rear cover and the lower rear cover.
Fig. 2-10a
Fig. 2-10b
[1]
[2]
[1]
[1]
[1]
[1]
[1]
9) Mount the upper rear cover using 7 screws [1].
Fig. 2-11
10) Fit the included 2 stepped screws [1] to the lower
rear cover; then, hook the PS print server unit [2]
on the screws.
Fig. 2-12
11) Using the included 4 RS tightening screws [1] to
secure the PS print server unit [2] in place.
Fig. 2-13
[1]
[1]
[1]
[2]
[1]
[2]
[1]
[2]
F-IM-6262-020e.p65 04/04/20, 17:40Page 5 AdobePageMaker6.5J/Win
–6 –
12) Using the communications cable [1], connect the
open I/F PCB and the PS print server unit [2].
Fig. 2-14
13) Using the cross Ethernet cable [1], connect the
PS print server unit and the host machine.
Fig. 2-15
14) Connect the DDIS cable [1] to the server unit and
the reader unit; then, fix it in place using the 2 wire
saddles [2].
Fig. 2-16
[1]
[2]
[1]
[2]
[1]
15) Bundle the cross Ethernet cable and the commu-
nications cable using the 4 cable clamps [1] of the
host machine.
Fig. 2-17
16) Connect one end of the power cable [1] to the PS
print server unit [2] and the other end to the wall
outlet.
Fig. 2-18
17) Connect the host machine’s power cable (for the
wall outlet).
18) Turn on the host machine and the server unit.
[1]
[1]
[2]
F-IM-6262-020e.p65 04/04/20, 17:40Page 6 AdobePageMaker6.5J/Win
–7 –
2.3 Setting Up the Server Unit
1) Press [Print] tab on the host machine’s control panel.
In case [Print] tab is not displayed, press [Print] tab
after press arrow tab.
2) Press [Printer status/Setting].
In response, the machine will automatically bring
up the Setup menu: select at least [Server Setup],
[Network Setup], and [Printer Setup] in order, stor-
ing appropriate data items as you move on.
Fig. 2-19
For instance, as you set up items under [Server Setup],
the machine will bring up a message asking if you
want to store the settings you have made; press [yes]
to store the settings. You will have to make the selec-
tions in specific order to move to subsequent items.
Server Setup:
Name the server, and make other settings.
Fig. 2-20
Network Setup:
Make port, protocol, and service settings.
Fig. 2-21
Printer Setup:
Make the print queue setting.
Fig. 2-22
3) Press [Done] under the Setup menu.
In response, the machine will automatically restart.
3Checking the Operation After
Making Settings
Print out the test page and setup page as follows to
check that the connection between the server unit and
the host machine is correct and the server unit has prop-
erly been set up:
1) Press [Print] tab on the host machine’s control panel.
In case [Print] tab is not displayed, press [Print] tab
after press arrow tab.
2) Press [Printer status/Setting].
3)Make the following selections on the operation
panel: Functions>Print Pages>PS Test Page>and
Configuration.
F-IM-6262-020e.p65 04/04/20, 17:40Page 7 AdobePageMaker6.5J/Win
– 8 –
Module Imprimante Couleur reseau-D1
Procédure d’Installation
Suivre les instructions suivantes pour l’installation de Module Imprimante Couleur reseau-D1.
1 Description
Fig. 1-1
[1] Appareil ...................................................... 1 pc.
[2] Ouverture I/F PCB ...................................... 1 pc.
[3] Câble de connexion ................................... 1 pc.
[4] Câble de puissance (prise de courant) ........ 1 pc.
[5] Câble de connexion Ethernet ...................... 1 pc.
[6] Serre-fil (angulaire) .................................... 4 pc.
[7] Vis à pas progressif ..................................... 2 pc.
[8] Vis de serrage RS (avec rondelle) ............... 4 pc.
[5] [6] [7] [8]
[1] [2] [3] [4]
F-IM-6262-020f.p65 04/04/20, 17:50Page 8 AdobePageMaker6.5J/Win
– 9 –
2 Installation
2.1 Avant de commencer l’installation
• Sélectionner les options suivantes de l’unité
principale puis sélectionner « 3 » :
COPIEUR>OPTION>INTERFACE>
IMAGE-CONT. (De cette manière, l’adresse IP la
plus appropriée sera sélectionnée pour établir la
communication entre l’appareil et l’unité principale).
• S’assurer que l’arrière de l’appareil se situe à une
distance d’au moins 20 cm du mur, comme le décrit
la figure.
Fig. 2-1
2.2 Installation de l’unité principale
Avant de commencer, effectuer les
opérations suivantes dans l’ordre
indiqué :
1. éteindre l’écran de contrôle.
2. éteindre l’appareil.
3. déconnecter le câble de puissance
(de la prise de courant).
Fig. 2-2
1) Déconnecter les 2 connecteurs [2] du câble DDIS.
2) Libérer le câble DDIS [3] du serre-fil [1].
Fig. 2-3
3) Enlever le couvercle arrière supérieur de la machine
[2]. (7 vis [1]).
Fig. 2-4
[1]
[2]
OFF
OFF
[3] Disconnect
[1]
[2]
[3]
[2]
[1]
[1]
[1]
[2]
20 cm min.
(arriere)
Appareil
(avant)
Unite principale
F-IM-6262-020f.p65 04/04/20, 17:50Page 9 AdobePageMaker6.5J/Win
–10 –
4) Oter les12 vis [1], et détacher le couvercle de la boîte
de contrôle [2].
Fig. 2-5
5) Préparer le montage de l’ouverture I/F PCB
• S’il n’existe pas de panneau UFR, ôter les 2 vis [1],
puis détacher la plaque [2]. (Garder les vis ôtées [1]
qui serviront dans un second temps).
Fig. 2-6
• S’il existe un panneau UFR, ôter les 2 vis [1], puis
détacher le panneau UFR [2].
(Garder les vis ôtées [1] qui serviront dans un sec-
ond temps).
Demander à l’utilisateur d’entreposer
le panneau UFR dans un endroit
approprié.
Fig. 2-7
6)En utilisant les vis ôtées auparavant, monter
l’ouverture I/F PCB [2].
Fig. 2-8
[1]
[2]
[1]
[1]
[1]
[1]
[2]
[1]
[2]
[1]
[2]
F-IM-6262-020f.p65 04/04/20, 17:50Page 10 AdobePageMaker6.5J/Win
Altri manuali per Color Network Printer Unit-D1
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Lingue:
Altri manuali Canon Stampante
Canon
Canon imageclass MF244DW Manuale utente
Canon
Canon imagePROGRAF iPF6350 Manuale utente
Canon
Canon imageRUNNER 1019j Manuale utente
Canon
Canon S830D Manuale utente
Canon
Canon mg6400 series Manuale utente
Canon
Canon i80 Series Manuale utente
Canon
Canon Pixma iP2820 Manuale utente
Canon
Canon imagePRESS C800 Series Manuale utente
Canon
Canon Oce ColorWave 700 Guida alla configurazione
Canon
Canon PIXMA TS5020 Manuale utente
Canon
Canon MP630 SERIES Manuale utente
Canon
Canon iP4700 - PIXMA Color Inkjet Printer Manuale utente
Canon
Canon imageRUNNER ADV Colour Manuale utente
Canon
Canon PIXMA TR152 Manuale utente
Canon
Canon MX490 Series Manuale utente
Canon
Canon Pixma iP5200 Series Manuale utente
Canon
Canon imageCLASS MF543x Manuale utente
Canon
Canon PIXMA iP7210 Manuale utente
Canon
Canon 475D - i Color Inkjet Printer Manuale utente
Canon
Canon PIXMA TS8140 Guida all'installazione
