Canon MultiPASS C530 Manuale utente

FP B740

MP C530

MP C545

MP C555

MP C560

SERVICE

MANUAL

Canon

REVISION 0

HY8-19AN-000

JULY 1999

MultiPASS C530 H12-1592 120V CCSI

MultiPASS C530 H12-1596 120V CND/LTN

MultiPASS C560 H12-1582 120V CCSI

MultiPASS C560 H12-1586 120V CND/LTN

Application

This manual has been issued by Canon Inc. for qualified persons to learn technical theory, installation,maintenance,

and repair of products. This manual covers all localities where the products are sold. For this reason, there may

be information in this manual that does not apply to your locality.

Corrections

This manual may contain technical inaccuracies or typographical errors due to improvements or changes in

products. When changes occur in applicable products or in the content of this manual, Canon will release tech-

nical information as the need arises. In the event of major changes in the contents of this manual over a long or

short period, Canon will issue a new editions of this manual.

The following paragraph does not apply to any countries where such provisions are inconsistent with local

law.

Trademarks

The product names and company names described in this manual are the registered trademarks of the individual

companies.

reproduced or translated into another language, in whole or in part, without the written consent of Canon Inc.

CANON INC.

Office Imaging ProductsTechnical Support Dept.

5-1 Hakusan 7-Chome,Toride-city, Ibaraki 302-0022, Japan

DTP System

This manual was produced on an Apple Macintosh®personal computer, final pages were printed on

Canon SUPER LASER SHOT B406 PS.

All graphics were produced with Macromedia FreeHand®.

All documents and all page layouts were created with Adobe PageMaker®.

I. MEANING OF MARKS

The marks used in this manual have the following meanings.

Mark Meaning

States a precaution to be taken to prevent danger to personnel, damage to the product, or

damage to electronic components by discharge of static electricity. for example.

States a precaution to be taken to prevent damage to electronic components by

electrostatic discharge.

Informs you of fire-related cautions.

Informs you that the plug must be removed from the power outlet before starting an

operation.

Gives useful information to understand descriptions.

Indicates sections to be read to obtain more detailed information.

NOTE

REFERENCE

II. ABOUTTHIS MANUAL

This manual is divided into five parts, and contains information required for servicing the product.

Each of the above parts is further divided into the following four chapters:

Chapter 1: General Description

This part explains product specifications and the how to service the unit safely. It is very important, so

please read it.

Chapter 2: Technical Reference

This part explains the technical theory of the product.

Chapter 3: Maintenance and Service

This part explains how to maintain the products for adjustment and troubleshooting and service operations

and service switches.

Chapter 4: Appendix

This part explains the informations of the optional products and user data flow.

• For more details of user operations and user reports, see the separate volume of

USER'S

GUIDE

• Procedure for assembly/disassembly and greasing points are not given in this manual. See

the illustrations in the separate volume of

PARTS CATALOG

• Detailed description of each SSSW/parameter is not given in this manual except the new

SSSWs/parameters added to this model.

See

G3 Facsimile Service Data Handbook (supplied separately)

for details them.

• See the

G3 Facsimile Error Code List (Rev.1, supplied separately)

for details of the

error codes not shown in this manual.

• Detailed description of connector Locations and Signal Descriptions in not given in this

manual.

See the

Circuit Diagram

for details them.

REFERENCE

III

III. REVISION HISTORY

REVISION CONTENT

0 Original

IV.TABLE OF CONTENTS

Page

Chapter 1: General Description

1 - 1 1. FEATURES

1 - 1 1.1 Overview

1 - 2 2. SPECIFICATIONS

1 - 2 2.1 General Specification

1 - 2 2.2 Communication Specification

1 - 3 2.3 Color Communication Specification

1 - 4 2.4 Scanner Specification

1 - 6 2.5 Printer Specification

1 - 9 2.6 Copy Specification

1 -10 2.7 Function

1 -12 3. OVERVIEW

1 -12 3.1 External View

1 -14 3.2 Operation Panel

1 -19 3.3 Consumables

1 -19 3.3.1 BJ cartridge and ink cartridge and BJ cartridge container

1 -21 3.3.2 Print media

1 -23 4. DIMENSIONS

1 -24 5. SAFETY & PRECAUTIONS

1 -24 5.1 Personnel Hazards

1 -26 5.1.1 Electrical shock

1 -26 5.1.2 High-temperature parts

1 -27 5.1.3 Fire hazards

1 -27 5.1.4 Moving parts

1 -27 5.1.5 Preventing ink stains

1 -28 5.2 General Cautions

1 -28 5.2.1 Unit cautions

1 -34 5.2.2 BJ cartridge cautions

1 -45 5.2.3 Ink cartridge cautions

1 -47 5.3 Servicing Cautions

1 -47 5.3.1 Damage from static charge

1 -47 5.3.2 Scanner unit

1 -48 5.3.3 Print assembly

1 -50 5.3.4 Paper feed section

1 -50 5.3.5 Control boards

1 -51 5.3.6 Detaching the outer covers

1 -52 5.3.7 Attaching the operation panel sheet

1 -53 5.4 Data-related precautions

1 -54 5.4.1 Data in the image storage memory (DRAM)

1 -55 5.4.2 Data in the control processing memory (SRAM)

1 -56 5.4.3 Data in the EEPROM

1 -58 5.4.4 Replacing ROM

1 -60 5.4.5 SPCNT board replacement precautions

1 -61 5.4.6 Data initialization through service operation

1 -62 5.5 Protective Mechanism

1 -62 5.5.1 Data battery backup function

1 -62 5.5.2 BJ cartridge maintenance features

1 -63 5.5.3 Heat protection mechanism

1 -63 5.5.4 Overcurrent protection

1 -64 5.5.5 Lightning protection

1 -64 5.5.6 Power leakage protection

1 -65 6. QUALIFICATION REQUIRED FOR INSTALLATION WORK

Chapter 2:Technical Reference

2 - 1 1. COMPONENT LAYOUT

2 - 3 2. SCANNER MECHANISM

2 - 6 3. PAPER SUPPLY MECHANISM

2 -11 4. PRINTER SECTION

2 -18 5. BJ CARTRIDGE

2 -18 5.1 Structure

2 -21 5.2 BJ Head Driver Block Diagram

2 -23 5.3 Printing Signal

2 -25 6. ELECTRIC CIRCUIT

2 -25 6.1 Component Block Diagram

2 -26 6.2 Circuit Board Components

2 -29 6.3 Flow of Image Signals

2 -34 7. COMMUNICATION SYSTEM OPERATIONS

2 -34 7.1 FAX/TEL Switching

2 -34 7.1.1 Settings

2 -34 7.1.2 Parameters

2 -35 7.2 Answering Machine Connection

2 -35 7.2.1 Settings

2 -35 7.2.2 Parameters

2 -35 7.3 Manual/Auto Reception Switching

2 -35 7.3.1 Settings

2 -35 7.3.2 Parameters

2 -36 8. NEW FUNCTION

2 -36 8.1 High-speed Transmission

2 -36 8.1.1 V.8/V.34 protocol

2 -50 8.2 JBIG Image Compression Encoding Method

2 -50 8.2.1 Outline of the JBIG image compression encoding method

2 -51 8.2.2 Single progression sequential bi-level image compression method

2 -52 8.2.3 Encoding method

2 -59 8.2.4 Construction of image data with JBIG image compression encoding

2 -60 8.2.5 Explanation of bi-level image header section (BIH)

2 -61 8.2.6 Explanation and parameters for each symbol used in BIH

2 -62 8.2.7 Explanation of bi-level image data (BID) section

2 -62 8.2.8 Explanation and parameters for each symbol used in BID

2 -64 8.3 Color Scanning Ability

2 -64 8.3.1 Contact sensor specifications

2 -65 8.3.2 Reading color documents

2 -65 8.3.3 Reading black & white documents

2 -66 8.4 MultiPASS Function

2 -66 8.4.1 Specifications

2 -68 8.4.2 Bi-directional centronics interface

2 -69 8.5 Color Communications

2 -69 8.5.1 Specifications

2 -71 8.5.2 The JPEG encoding method

2 -73 8.5.3 Image processing outline

2 -74 8.5.4 ITU-T color transimission protocols

2 -75 8.5.5 Conditions necessary for ITU-T color transmission

2 -76 8.5.6

Operaions where other machine does not have color communications abillty

2 -76 8.5.7 Conditions necessary for color reception

2 -77 8.5.8 Specification for Color Communications

Chapter 3: Maintenance & Service

3 - 1 1. MAINTENANCE LIST

3 - 1 1.1 Consumables

3 - 1 1.2 Cleaning

3 - 2 1.3 Periodic Inspection

3 - 2 1.4 Periodic Replacement Parts

3 - 2 1.5 Adjustment Items

3 - 3 1.6 General Tools

3 - 3 1.7 Special Tools

3 - 4 2. HOW TO CLEAN PARTS

3 - 4 2.1 Main Unit Outer Covers

3 - 4 2.2 Separation Roller

3 - 4 2.3 Document Feed/Eject Roller

3 - 4 2.4 Separation Guide

3 - 4 2.5 Scanning Glass (Contact Sensor)

3 - 4 2.6 White Sheet

3 - 4 2.7 Printer Platen

3 - 6 3. ADJUSTMENT

3 - 6 3.1 CS LED Lights-on Duration Adjustment

3 - 7 3.2 Vertical Alignment Correction

3 -10 4. TROUBLESHOOTING

3 -10 4.1 Troubleshooting Index

3 -11 4.2 Errors Shown on the Display

3 -11 4.2.1 User error message

VII

3 -16 4.2.2 Error codes

3 -24 4.3 Errors not Shown on the Display

3 -24 4.3.1 General errors

3 -25 4.3.2 Printing problem

3 -27 4.3.3 Scanning problem

3 -29 5. SERVICE SWITCHES

3 -29 5.1 Hardware Switches

3 -29 5.2 Service Data Setting

3 -29 5.2.1 Service data overview

3 -30 5.2.2 Service data registration/setting method

3 -31 5.2.3 Service data setting

3 -38 5.2.4 Explanation of service data

3 -39 5.2.5 New SSSWs/parameters added to this model

3 -43 6. TEST FUNCTIONS

3 -43 6.1 User Test Print Functions

3 -43 6.1.1 Nozzle check

3 -44 6.2 Service Test Functions

3 -44 6.2.1 Test mode overview

3 -45 6.2.2 Test mode flowchart

3 -46 6.2.3 D-RAM tests

3 -46 6.2.4 CS tests

3 -47 6.2.5 PRINT test

3 -49 6.2.6 Modem and NCU tests

3 -53 6.2.7 Faculty tests

3 -58 7. SERVICE REPORT

3 -58 7.1 Report Output Function

3 -58 7.1.1 User report output functions

3 -60 7.1.2 Service report output functions

3 -68 8. WIRING DIAGRAM

3 -68 8.1 Wiring Diagram

3 -69 8.2 Connector Location and Signal Descriptions

Chapter 4: Appendix

4 - 1 1. INSTALLATION

4 - 1 1.1 Setting Up

4 - 1 1.2 Checking Operations

4 - 2 2. USER DATA FLOW

4 - 2 2.1 USER DATA FLOW (by Operation Panel)

4 - 6 2.2 Memory Reference Function Flow

4 - 7 3. MAKER-CODE

INDEX

Altri manuali per MultiPASS C530

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Canon Stampante

Canon

Canon PowerShot S330 Digital ELPH Manuale utente

Canon

Canon BJC-3000 Series Manuale utente

Canon

Canon Laser Shot LBP-1910 Manuale utente

Canon

Canon GX5050 Guida all'installazione

Canon

Canon MAXIFY iB4060 Guida all'installazione

Canon

Canon PIXMA MG6320 Guida all'installazione

Canon

Canon Color Bubble Jet BJC-5000 Series Manuale utente

Canon

Canon S4500 - BJC Color Inkjet Printer Manuale utente

Canon

Canon imagepress C7010VP Guida alla risoluzione dei problemi

Canon

Canon Color Bubble Jet BJC-1000 Series Manuale utente

Canon

Canon mg6850 series Guida all'installazione

Canon

Canon MX470 Manuale utente

Canon

Canon BJC-S750 Manuale

Canon

Canon LBP722Cdw Manuale utente

Canon

Canon TS3100 Series Manuale utente

Canon

Canon image Prograf iPF680 Series Guida utente

Canon

Canon LBP674Cx Manuale utente

Canon

Canon BJC-4000 Manuale utente

Canon

Canon Sure shot 80 tele Manuale utente

Canon

Canon Laser Shot LBP-5200 Manuale utente

Canon

Canon TS8020 Guida all'installazione

Canon

Canon Pixma Pro9500 Series Manuale utente

Canon

Canon imageCLASS MF6540 Istruzioni per il montaggio

Canon

Canon PIXMA TS9020 Guida all'installazione

Manuali Stampante popolari di altre marche

Lexmark

Lexmark 1400 Series Manuale

Evolis

Evolis Elypso Manuale utente

Kyocera

Kyocera FS-9530DN Manuale utente

Samsung

Samsung BIXOLON SRP-350plusF Manuale utente

Dell

Dell Color Laser Printer 2130cn Manuale utente

Tektronix

Tektronix Phaser 840 Manuale utente

Epson

Epson ET-7750 Istruzioni operative

Eltron

Eltron P210 Guide Manuale utente

Ricoh

Ricoh MD-P1 Manuale utente

Epson

Epson SC-F7100 series Manuale utente

Epson

Epson Stylus C40UX Manuale utente

IRA3D

IRA3D POETRY4 Manuale utente

Ricoh

Ricoh Aficio AP400 Manuale utente

BIXOLON

BIXOLON SRP-352plusV Manuale utente

Epson

Epson Stylus Photo PX700W Istruzioni per il montaggio

Ricoh

Ricoh SP204SF Manuale utente

Star Micronics

Star Micronics futurePRNT TSP100 Manuale utente

Epson

Epson TM-TM88V-i Manuale per l'uso e la cura