Canon PIXMA MX432 Manuale utente

Setup Guide

This guide provides information for setting up a network connection for the printer.

Wireless Connection

Preparation for Connection

Printer Setup

Setup Procedure Selection

Push Button Method

WPS

Troubleshooting

Wireless Connection

aPreparation for Connection

Before Starting Wireless Connection Setup

1. Make sure that the printer is turned on.

If the power is on, the ON button (A) will be lit.

Notes on Wireless Connection

Make sure that the computer is connected to the access point (A) (or wireless network router) you want to connect your

printer to.

The conﬁ guration, router functions, setup procedures and security settings of the network device vary depending on your

system environment. For details, refer to the manual of your network device or contact its manufacturer.

Check if your device supports IEEE802.11n, 802.11g or 802.11b.

If your device is set to the "IEEE802.11 n only" mode, WEP or TKIP cannot be used as a security protocol. Change the

security protocol for your device to something other than WEP and TKIP or change the setting to something other than

"IEEE802.11 n only."

For ofﬁ ce use, consult your network administrator.

Take added care when connecting to a network that is not protected with security measures, as there is a risk of disclosing

data such as your personal information to a third party.

An "Ad-hoc connection," which establishes a direct connection to the computer over a wireless connection without an

access point, is not supported. Be sure to prepare an access point.

bPrinter Setup

1. Press the Setup button (A) on the printer.

2. Use the or button (A) to select Device settings.

3. Press the OK button (B).

•

4. Select LAN settings.

5. Press the OK button.

6. Select Wireless LAN setup.

7. Press the OK button.

The (blue) Wi-Fi lamp (A) lights up when wireless connection is enabled.

The printer will automatically search for access points supporting WPS (Wi-Fi Protected Setup).

cSetup Procedure Selection

Push Button Method → d-A WPS → d-B

d-A Push Button Method

dConnection Using WPS

1. Press and hold the WPS button on the access point (for about 5 seconds).

For details on pressing the WPS button, refer to the access point manual.

2. Press the OK button on the printer within 2 minutes.

The (blue) Wi-Fi lamp on the printer ﬂ ashes while searching for or connecting to the access point.

3. When the left screen appears, press the OK button.

4. Press the COPY button (A).

The network connection setup is now complete.

d-B WPS

dConnection Using WPS

1. Select WPS.

2. Press the OK button.

3. Select Push button method.

4. Press the OK button.

5. Press and hold the WPS button on the access point (for about 5 seconds).

For details on pressing the WPS button, refer to the access point manual.

6. Press the OK button on the printer within 2 minutes.

The (blue) Wi-Fi lamp on the printer ﬂ ashes while searching for or connecting to the access point.

7. When the left screen appears, press the OK button.

8. Press the COPY button (A).

The network connection setup is now complete.

Troubleshooting

WPS

Multiple APs detected

The screen appears when multiple access points are detected. Wait for a while, then conﬁ gure WPS settings again.

Press the WPS button on only one access point.

Failed to connect

The screen appears when an error occurs.

Check the access point settings, then conﬁ gure WPS settings again.

For details on how to check the settings of the access point, refer to the manual supplied with the access point or

contact its manufacturer.

Timeout error

The screen appears when WPS setup was not completed within a speciﬁ ed time.

Complete the setup within the speciﬁ ed time.



Altri manuali per PIXMA MX432

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Canon Stampante

Canon

Canon PIXMA TS5300 Series Manuale utente

Canon

Canon PIXMA TS5020 Manuale utente

Canon

Canon imagePROGRAF iPF6450 Guida utente

Canon

Canon MG3600 series Manuale utente

Canon

Canon E410 Series Guida all'installazione

Canon

Canon MultiPASS C2500 Manuale utente

Canon

Canon LBP-800 Manuale utente

Canon

Canon LBP7780CX Manuale utente

Canon

Canon imageprograf IPF785 Manuale utente

Canon

Canon i560 Series Guida alla configurazione

Canon

Canon Pixma G3060 Series Guida all'installazione

Canon

Canon imageclass MF216N Manuale utente

Canon

Canon imagePROGRAF iPF6350 Manuale utente

Canon

Canon Q30-3260-US1 Manuale utente

Canon

Canon MX470 Manuale utente

Canon

Canon imageCLASS MF4890dw Manuale di servizio

Canon

Canon PIXMA MG6320 Manuale utente

Canon

Canon TS8100 Series Manuale utente

Canon

Canon Pixma TS3400 Series Manuale utente

Canon

Canon iPF655 - imagePROGRAF Color Inkjet Printer Manuale utente

Canon

Canon iP1800 - PIXMA Color Inkjet Printer Manuale utente

Canon

Canon PowerShot S200 Istruzioni per l’uso

Canon

Canon Pixma E480 series Manuale di istruzioni

Canon

Canon PIXMA iP6000D Manuale utente

Manuali Stampante popolari di altre marche

Lexmark

Lexmark 1400 Series Manuale

Evolis

Evolis Elypso Manuale utente

Kyocera

Kyocera FS-9530DN Manuale utente

Samsung

Samsung BIXOLON SRP-350plusF Manuale utente

Dell

Dell Color Laser Printer 2130cn Manuale utente

Tektronix

Tektronix Phaser 840 Manuale utente

Epson

Epson ET-7750 Istruzioni operative

Eltron

Eltron P210 Guide Manuale utente

Ricoh

Ricoh MD-P1 Manuale utente

Epson

Epson SC-F7100 series Manuale utente

Epson

Epson Stylus C40UX Manuale utente

IRA3D

IRA3D POETRY4 Manuale utente

Ricoh

Ricoh Aficio AP400 Manuale utente

BIXOLON

BIXOLON SRP-352plusV Manuale utente

Epson

Epson Stylus Photo PX700W Istruzioni per il montaggio

Ricoh

Ricoh SP204SF Manuale utente

Star Micronics

Star Micronics futurePRNT TSP100 Manuale utente

Epson

Epson TM-TM88V-i Manuale per l'uso e la cura