Canon S 6300 Manuale utente

REVISION 0



2001 CANON INC. CANON S6300 0801 XX 0.00-0 PRINTED IN JAPAN (IMPRIME AU JAPON)

AUG. 2001

082001 XX 0.00-0

Application

This manual has been issued by Canon Inc. for qualified persons to learn technical theory, installation,

maintenance, and repair of products. This manual covers all localities where the products are sold. For

this reason, there may be information in this manual that does not apply to your locality.

Corrections

This manual could include technical inaccuracies or typographical errors due to improvements or

changes in the products. When changes occur in applicable products or in the content of this manual,

Canon will release technical information as the need arises. In the event of major changes in the

contents of this manual over a long or short period, Canon will issue a new edition of this manual

The following paragraph does not apply to any countries where such provisions are

inconsistent with local law.

Trademarks

The product names and company names described in this manual are the registered trademarks of the

individual companies.

copied, reproduced or translated into another language, in whole or in part, without the written consent

of Canon Inc., except in the case of internal business use.

CANON INC.

i Printer Technical Support Dept. 11

16-1, Shimonoge 3-chome, Takatsu-ku, Kawasaki, Kanagawa 213-8512, Japan

This manual has been produced on an Apple Power Macintosh 7300/180 personal computer and OKI

MICROLINE 803 PSIIV laser beam printer; printing films were printed on Agfa SelectSet Avantra 25. All

page layouts, logos, and parts-list data were saved with Canon Optical Disc Subsystem mo-5001S™ and

Optical Disc Cartridge mo-502M™, and Interface Kit mo-IF2™ for Macintosh. All graphics were produced

with MACROMEDIA FREEHAND™ 7.0J. All documents and all page layouts were created with

QuarkXpress™ 3.3 Japanese version.

I. ABOUT THIS MANUAL

This manual consists of four parts containing information for servicing the product.

Part 1: Product Specifications

Product overview and specifications.

Part 2: Troubleshooting

A guide to troubleshooting the product and identifying parts needing replacement.

Troubleshooting solutions are listed according to the error indications displayed by the

status indicator and by problem descriptions.

Part 3: Technical Reference

Block diagrams and information on the hardware's new technologies.

Part 4: Appendix

Pin configurations.

Disassembly and reassembly procedures are not fully covered in this manual.

Refer to the illustrations in the separate Parts Catalog as well.

Product

Specifications Troubleshooting Appendix

Technical

Reference

II. TABLE OF CONTENTS

Page

Part 1:

PRODUCT SPECIFICATIONS

1 - 1 1. PRODUCT OVERVIEW

1 - 1 1.1 Product Overview

1 - 2 2. SPECIFICATIONS

1 - 2 2.1 Printer Specifications

1 - 2 2.1.1 Printer specifications

1 - 3 2.1.2 Printer service life

1 - 3 2.1.3 BJ cartridge service life

1 - 4 2.2 Paper Specifications

1 - 4 2.2.1 Paper sizes and weights

1 - 4 2.2.2 Paper types and settings

1 - 5 2.2.3 Printing area

1 - 6 2.3 BJ Cartridge Specifications

1 - 6 2.4 Printer and Scanner Drivers

1 - 7 3. PACKING CONFIGURATION

1 - 8 4. PARTS CODE LIST

Part 2: TROUBLESHOOTING

2 - 1 1. PRINTER OPERATION

2 - 1 1.1 Printer Operation Procedure

2 - 1 1.2 Status Indicator

2 - 2 1.3 Operating the Printer

2 - 2 1.3.1 Cleaning operation

2 - 2 1.3.2 Printing the nozzle check pattern

2 - 4 1.3.3 Roller cleaning operation

2 - 5 2. SERVICING

2 - 5 2.1 Before Troubleshooting

2 - 6 2.2 Detectable Problems from System Start to Exit

2 - 9 2.3 Troubleshooting Problems

2 -10 2.4 Troubleshooting Error Indications

2 -13 3. DISASSEMBLY AND REASSEMBLY

2 -13 3.1 Cautions for Disassembly and Reassembly

2 -13 3.1.1 Cautions for ink stains (Ink path/ink mist)

2 -13 3.1.2 Damage by static electricity

2 -13 3.1.3 Deformation of spur tips

2 -14 3.2 Exploded View

2 -15 3.3 Disassembly and Reassembly

2 -15 3.3.1 Carriage lock release

2 -16 3.3.2 Removing and installing tap screws

2 -16 3.3.3 Installing and removing the carriage encoder film

2 -17 3.3.4 Handling encoder film

2 -17 3.3.5 Removing and installing the control board

2 -17 3.3.6 Removal of red screws prohibited

2 -18 3.3.7 Installing the logic board cover

2 -18 3.3.8 Handling the purge unit

2 -19 3.4 Adjustments and Settings After Disassembly and Reassembly

2 -19 3.4.1 Adjustments

2 -20 3.4.2 Applying grease

2 -21 3.4.3 Print head position adjustment

2 -22 3.4.4 Print head seam stripe adjustment

Page

2 -23 3.4.5 Setting the EEPROM

2 -24 4. OPERATION CHECK AFTER DISASSEMBLY AND REASSEMBLY

2 -24 4.1 Check Procedure

2 -25 5. TRANSPORTING THE PRINTER

2 -25 5.1 Procedure

2 -26 6. PARTS REPLACEMENT, PERIODIC INSPECTIONS, & TOOLS

2 -26 6.1 Parts Replacement

2 -26 6.2 Periodic Inspections

2 -26 6.3 Tool List

2 -27 7. SERVICE-RELATED FEATURES

2 -27 7.1 Service Mode Operations

2 -28 7.2 Test Printout

2 -29 7.3 Printing the EEPROM Information

2 -30 7.4 Resetting the EEPROM

2 -30 7.5 Setting the Printer Settings in the EEPROM

Part 3: TECHNICAL REFERENCE

3 - 1 1. PRINTER CONTROL SECTION

3 - 1 1.1 Printing Data and Control Signal Flow

3 - 2 1.2 Print Drive Method

3 - 3 1.2.1 Print drive control

3 - 4 1.2.2 Print driving method

3 - 5 1.3 Control During Printing

3 - 5 1.3.1 2-dot Pair + Bi-directional printing

3 - 5 1.3.2 Seam stripe control

3 - 5 1.3.3 Rest between scans (Border detection control)

3 - 6 1.3.4 Smear control and rest between pages

3 - 6 1.3.5 Automatic power ON/OFF

3 - 6 1.3.6 Print head protection from overheating

3 - 6 1.3.7 Power motor control

3 - 7 1.4 Detection Functions

3 - 7 1.4.1 Detection by sensors

3 - 7 1.4.2 Paper-end sensor

3 - 8 1.4.3 Ink sensor (Same as for BJ F600)

3 - 8 1.4.4 Cover sensor

3 - 8 1.4.5 Pump sensor

3 - 9 1.4.6 Internal temperature sensor

3 - 9 1.4.7 Head temperature sensor

3 - 9 1.4.8 ASF sensor

3 - 9 1.4.9 Carriage encoder/paper feed encoder

3 - 9 1.5 Other Sensing Features

3 - 9 1.5.1 Waste-ink detection

3 - 9 1.5.2 Print head detection

3 -10 2. ELECTRICAL DRIVE SECTION

3 -10 2.1 Block Diagram

3 -11 2.2 Electrical Section

3 -12 3. PRINTER'S MECHANICAL PARTS

3 -12 3.1 Overview of the Printer's Mechanical Parts

3 -12 3.1.1 Carriage

3 -12 3.1.2 Purge section

3 -13 3.1.3 Paper feed section

3 -14 3.2 Purge Section

3 -14 3.2.1 Purge section functions

III

Page

3 -15 3.2.2 Purge section components

3 -17 3.3 Paper Feed Section

3 -17 3.3.1 Paper feed components

3 -18 3.3.2 Friction separation system

3 -18 3.3.3 Paper transport section

3 -18 3.3.4 Paper discharge section

3 -19 4. LOGIC BOARD COMPONENTS

3 -22 5. OPERATION WITH A COMPUTER

3 -22 5.1 Printing Operation with the Basic Settings Sheet

3 -22 5.2 Using the Utility Sheet

3 -23 6. INK SUCTION AMOUNT IN THE CLEANING MODE

3 -24 7. TECHNICAL REFERENCE

3 -24 7.1 Printing Mode List

3 -25 8. PRINT HEAD

Part 4: APPENDIX

4 - 1 1. CONNECTOR LOCATIONS AND PIN CONFIGURATIONS

4 - 5 1.1 Carriage Board

4 - 7 1.2 Print Head

4 - 8 2. CIRCUIT DIAGRAM

III. ILLUSTRATION INDEX

Page

Part 1:

PRODUCT SPECIFICATIONS

1 - 1 Figure 1 - 1 Printer Exterior

1 - 3 Figure 1 - 2 1500 Characters Pattern

1 - 3 Figure 1 - 3 JIS SCID No. 5

1 - 5 Figure 1 - 4 Printable Area

1 - 7 Figure 1 - 5 Packing Configuration

Part 2: TROUBLESHOOTING

2 - 1 Figure 2 - 1 Operation Panel

2 - 3 Figure 2 - 2 Nozzle Check Pattern Printout

2 -14 Figure 2 - 3 Exploded View

2 -15 Figure 2 - 4 Carriage Lock Release

2 -16 Figure 2 - 5 Encoder Film

2 -17 Figure 2 - 6 Do not Remove the Red Screws

2 -18 Figure 2 - 7 Installing the Logic Board Cover

2 -18 Figure 2 - 8 Handling the Purge Unit

2 -20 Figure 2 - 9 Applying Grease

2 -21 Figure 2 -10 Printing Position Adjustment Pattern

2 -22 Figure 2 -11 Seam Stripe Adjustment Pattern

2 -28 Figure 2 -12 Service/Factory Test Printout (Sample)

2 -29 Figure 2 -13 EEPROM Information Printout (Sample)

Part 3: TECHNICAL REFERENCE

3 - 1 Figure 3 - 1 Printing Signal Flow

3 - 2 Figure 3 - 2 Serial Data

3 - 3 Figure 3 - 3 Print Driving

3 - 4 Figure 3 - 4 Printing Driving Method

3 - 7 Figure 3 - 5 Location of Sensors

3 - 8 Figure 3 - 6 Ink Sensor

3 -10 Figure 3 - 7 Block Diagram

3 -12 Figure 3 - 8 Printer's Mechanical Parts

3 -15 Figure 3 - 9 Purge Section Components

3 -16 Figure 3 -10 Pump Operation

3 -17 Figure 3 -11 Paper Feeding

3 -19 Figure 3 -12 Control Board

3 -22 Figure 3 -13 Basic Settings Sheet (Sample)

3 -25 Figure 3 -14 Nozzle Array

Part 4: APPENDIX

4 - 1 Figure 4 - 1 Control Board

4 - 5 Figure 4 - 2 Carriage Board

4 - 7 Figure 4 - 3 BJ Cartridge

IV. TABLE INDEX

Page

Part 1: PRODUCT SPECIFICATIONS

1 - 9 Table 1- 1 PARTS CODE

Part 2: TROUBLESHOOTING

2 -10 Table 2- 1 ERROR INDICATIONS

Part 3: TECHNICAL REFERENCE

3 -24 Table 3 - 1 PRINTING MODE LIST

Altri manuali per S 6300

Indice

Altri manuali Canon Stampante

Canon

Canon PIXMA PRO-1 Series Manuale utente

Canon

Canon imageCLASS MF6540 Istruzioni per il montaggio

Canon

Canon FAXPHONE L100 Manuale utente

Canon

Canon iR2020 Series Manuale di servizio

Canon

Canon LaserCLASS 310 Guida rapida

Canon

Canon imagePROGRAF TM-305 Manuale utente

Canon

Canon 1418C025 Manuale utente

Canon

Canon PIXMA K10332 Manuale utente

Canon

Canon BJC-S820 Manuale utente

Canon

Canon JX210P Manuale utente

Canon

Canon Selphy CP710 Manuale utente

Canon

Canon imagePROGRAF W2200S Manuale utente

Canon

Canon imageCLASS Mf6180dw Manuale utente

Canon

Canon imageclass MF229DW Manuale utente

Canon

Canon MultiPASS F60 Manuale

Canon

Canon PIXMA MG6320 Guida all'installazione

Canon

Canon 8996A001 - i 455 Color Inkjet Printer Guida alla configurazione

Canon

Canon Color imageCLASS MF8050Cn Manuale utente

Canon

Canon BJC-S800 Manuale utente

Canon

Canon iR C6800 Series Manuale di servizio

Canon

Canon i960 Series Manuale utente

Canon

Canon imageFORMULA DR-G2140 Manuale utente

Canon

Canon imageRUNNER ADVANCE 8105 Series Manuale utente

Canon

Canon iP4680 Istruzioni per l’uso

Manuali Stampante popolari di altre marche

Lexmark

Lexmark 1400 Series Manuale

Evolis

Evolis Elypso Manuale utente

Kyocera

Kyocera FS-9530DN Manuale utente

Samsung

Samsung BIXOLON SRP-350plusF Manuale utente

Dell

Dell Color Laser Printer 2130cn Manuale utente

Tektronix

Tektronix Phaser 840 Manuale utente

Epson

Epson ET-7750 Istruzioni operative

Eltron

Eltron P210 Guide Manuale utente

Ricoh

Ricoh MD-P1 Manuale utente

Epson

Epson SC-F7100 series Manuale utente

Epson

Epson Stylus C40UX Manuale utente

IRA3D

IRA3D POETRY4 Manuale utente

Ricoh

Ricoh Aficio AP400 Manuale utente

BIXOLON

BIXOLON SRP-352plusV Manuale utente

Epson

Epson Stylus Photo PX700W Istruzioni per il montaggio

Ricoh

Ricoh SP204SF Manuale utente

Star Micronics

Star Micronics futurePRNT TSP100 Manuale utente

Epson

Epson TM-TM88V-i Manuale per l'uso e la cura