Canon S450 Manuale

Altri manuali per S450

1

Indice

Altri manuali Canon Stampante

Canon

Canon PIXMA TS3160 Guida all'installazione

Canon

Canon PIXMA G4610 Series Manuale utente

Canon

Canon imagePRESS Lite C170 Manuale utente

Canon

Canon i560 Series Guida alla configurazione

Canon

Canon TR4700 Series Guida all'installazione

Canon

Canon GX7000 Series Manuale utente

Canon

Canon iPF720 - imagePROGRAF Color Inkjet Printer Manuale utente

Canon

Canon PRO-300 Series Guida all'installazione

Canon

Canon imagePROGRAF TX-3000 Guida all'installazione

Canon

Canon PIXMA MP970 Manuale utente

Canon

Canon i475D Series Manuale utente

Canon

Canon MG6600 Series Manuale utente

Canon

Canon N 1000 Manuale utente

Canon

Canon PIXMA TS9020 Guida all'installazione

Canon

Canon imageFormula CR-150 Manuale di istruzioni

Canon

Canon Laser Shot LBP-2900 Manuale utente

Canon

Canon i 320 Manuale utente

Canon

Canon PIXMA MX722 Manuale utente

Canon

Canon E410 Series Guida all'installazione

Canon

Canon TM-5300 Guida all'installazione

Canon

Canon TR4600 Series Manuale utente

Canon

Canon Pixma MG3500 Series Manuale utente

Canon

Canon MP280 Guida all'installazione

Canon

Canon Color Laser Shot LBP-2160 Manuale utente

Manuali Stampante popolari di altre marche

Lexmark

Lexmark 1400 Series Manuale

Evolis

Evolis Elypso Manuale utente

Kyocera

Kyocera FS-9530DN Manuale utente

Samsung

Samsung BIXOLON SRP-350plusF Manuale utente

Dell

Dell Color Laser Printer 2130cn Manuale utente

Tektronix

Tektronix Phaser 840 Manuale utente

Epson

Epson ET-7750 Istruzioni operative

Eltron

Eltron P210 Guide Manuale utente

Ricoh

Ricoh MD-P1 Manuale utente

Epson

Epson SC-F7100 series Manuale utente

Epson

Epson Stylus C40UX Manuale utente

IRA3D

IRA3D POETRY4 Manuale utente

Ricoh

Ricoh Aficio AP400 Manuale utente

BIXOLON

BIXOLON SRP-352plusV Manuale utente

Epson

Epson Stylus Photo PX700W Istruzioni per il montaggio

Ricoh

Ricoh SP204SF Manuale utente

Star Micronics

Star Micronics futurePRNT TSP100 Manuale utente

Epson

Epson TM-TM88V-i Manuale per l'uso e la cura

S450 Setup Instructions

Step 1: Unpack The Printer

1. Carefully remove all items from the box.

2. Remove all shipping tape and materials from the unit. Open the front cover and

remove the spacers.

Step 2: Plug In and Turn On the Printer

Step 3: Attach the Paper

Output Tray

Step 4: Install The BJ® Cartridge

1. Lift up the front cover.

2. Remove the BC-31e Color BJ Cartridge from its package.

3. Remove:

• Orange cap

• Orange tape

4. Raise the blue lock lever on the right side of the cartridge holder.

5. Insert the BC-31e Color BJ Cartridge into the right cartridge holder.

6. Lower the blue lock lever until it locks into place, then remove the large orange

protective piece.

7. Repeat these steps to prepare the BC-30e Black Cartridge.

Remove all pieces of shipping tape from the outside of the printer. Be sure to remove the tape

from the back of the printer also.

Remove the protective plastic piece from the sheet feeder and protective foam block from the

paper path.

Note that tape may not be in the exact locations shown here.

8. Open the document tray.

Insert the black cartridge into the left cartridge holder.

Step 5: Insert the Ink

Tanks

1. Start with the BCI-3eY (Yellow) Ink

Tank.

2. Pull up the orange tape and remove the plastic wrapper.

3. Twist off the protective orange cap.

To prevent spills, do not press the side of the Ink Tank.

4. Insert the Ink Tank into the slot on the right.

5. Press down until the Ink Tank locks into place.

6. Insert the BCI-3eM Magenta and BCI-3eC Cyan Ink Tanks into their respective

slots in the cartridge.

7. Insert the black Ink Tank into the cartridge on the left.

8. Important!

Before you close the front cover, write down the serial number (located inside the

printer to the right of the cartridge holder).

9. Close the front cover.

The printer automatically cleans the print heads which takes approximately 30-60 seconds.

When the POWER light stops flashing, the printer is ready.

Step 6: Install the Printer Software - Choose

Installation A, B, or C

A - Windows ® 95, Windows 98, Windows Me, and

Windows NT 4.0 Users

1. Connect either a USB or parallel cable to the computer, but DO NOT connect it to

the printer. (Port location depends on the computer.)

2. Turn on the computer.

3. Insert the Canon Creative CD-ROM into your CD-ROM drive. Wait for your CD-ROM

drive to start up.

4. When you see this screen, click Next.

If you do not see this screen, see the

Installation Tips following step 6B.

5. When you see this screen, connect your interface cable to the printer.

6. Connect the free end of the USB or parallel cable to the printer.

USB Cable Users: Please wait a few minutes while your computer performs steps necessary for

completing USB installation.

7. After connecting the interface cable, click Next.

8. Continue to follow the on-screen instructions. Setup includes:

• Canon S450 Installation

• Product Registration

• Canon Creative Installation

9. After installing software, you may be asked to restart your computer.

B - Windows 2000 Users

1. Connect either a USB or parallel cable to the computer (port location depends on

the computer), and then connect it to the printer.

2. Turn on the computer.

3. The Found New Hardware Wizard screen

appears. Click Next.

Note: If you do not see this screen, skip to step

8.