Canon S520 Manuale utente

QY8-1379-000

REVISION 0



2001 CANON INC. CANON S900/S820/S750/S520 1201 GR 0.30-0 PRINTED IN JAPAN (IMPRIME AU JAPON)

DEC. 2001

122001 GR 0.30-0

Application

This manual has been issued by Canon Inc. for qualified persons to learn technical theory, installation,

maintenance, and repair of products. This manual covers all localities where the products are sold. For

this reason, there may be information in this manual that does not apply to your locality.

Corrections

This manual could include technical inaccuracies or typographical errors due to improvements or

changes in the products. When changes occur in applicable products or in the content of this manual,

Canon will release technical information as the need arises. In the event of major changes in the

contents of this manual over a long or short period, Canon will issue a new edition of this manual

The following paragraph does not apply to any countries where such provisions are

inconsistent with local law.

Trademarks

The product names and company names described in this manual are the registered trademarks of the

individual companies.

copied, reproduced or translated into another language, in whole or in part, without the written consent

of Canon Inc., except in the case of internal business use.

CANON INC.

i Printer Technical Support Dept. 11,21

16-1, Shimonoge 3-chome, Takatsu-ku, Kawasaki, Kanagawa 213-8512, Japan

This manual has been produced on an Apple Power Macintosh Power Macintosh 7300/180

computer and Apple LaserWriter II NTX-J laser beam printer; printing films were printed on

Agfa SelectSet Avantra 25. All page layout and illustration data was saved on a YANO 640MO

drive system using NJ 640MO and Mitsubishi MR230MI discs.

Logos and illustrations were created with MACROMEDIA FREEHAND 7.0J. All documents and

page layouts were created with QuarkXPress 3.3 Japanese version.

I. ABOUT THIS MANUAL

This manual consists of four parts containing information for servicing the product.

Part 1: Product Specifications

Product overview and specifications.

Part 2: Troubleshooting

A guide to troubleshooting the product and identifying parts needing replacement.

Troubleshooting solutions are listed according to the error indications displayed by the

status indicator and by problem descriptions.

Part 3: Technical Reference

Block diagrams and information on the hardware's new technologies.

Part 4: Appendix

Pin configurations.

Disassembly and reassembly procedures are not fully covered in this manual.

Refer to the illustrations in the separate Parts Catalog as well.

Product

Specifications Troubleshooting Appendix

Technical

Reference

II. TABLE OF CONTENTS

Page Part 1: PRODUCT SPECIFICATIONS

(S900)

1 - 1 1. PRODUCT OVERVIEW

1 - 1 1.1 Product Overview

1 - 1 1.2 Special Features

1 - 2 2. SPECIFICATIONS

1 - 2 2.1 Printer Specifications

1 - 2 2.1.1 Printer specifications

1 - 3 2.1.2 Printer service life

1 - 3 2.1.3 Print head service life

1 - 4 2.2 Paper Specifications

1 - 4 2.2.1 Paper sizes and weights

1 - 4 2.2.2 Paper types and settings

1 - 5 2.2.3 Printable area

1 - 6 2.3 Print Head Specifications

1 - 6 2.4 Printer and Scanner Drivers

1 - 7 3. PRODUCT CODE LIST

(S820)

1 - 9 1. PRODUCT OVERVIEW

1 - 9 1.1 Product Overview

1 - 9 1.2 Special Features

1 -10 2. SPECIFICATIONS

1 -10 2.1 Printer Specifications

1 -10 2.1.1 Printer specifications

1 -11 2.1.2 Printer service life

1 -11 2.1.3 Print head service life

1 -12 2.2 Paper Specifications

1 -12 2.2.1 Paper sizes and weights

1 -12 2.2.2 Paper types and settings

1 -12 2.2.3 Printable area

1 -13 2.3 Print Head Specifications

1 -13 2.4 Printer and Scanner Drivers

1 -14 3. PRODUCT CODE LIST

(S750)

1 -15 1. PRODUCT OVERVIEW

1 -15 1.1 Product Overview

1 -15 1.2 Special Features

1 -16 2. SPECIFICATIONS

1 -16 2.1 Printer Specifications

1 -16 2.1.1 Printer specifications

1 -16 2.1.2 Printer service life

1 -17 2.1.3 Print head service life

1 -18 2.2 Paper Specifications

1 -18 2.2.1 Paper sizes and weights

1 -18 2.2.2 Paper types and settings

1 -18 2.2.3 Printable area

1 -19 2.3 Print Head Specifications

1 -19 2.4 Printer and Scanner Drivers

1 -20 3. PRODUCT CODE LIST

Page

(S520)

1 -21 1. PRODUCT OVERVIEW

1 -21 1.1 Product Overview

1 -21 1.2 Special Features

1 -22 2. SPECIFICATIONS

1 -22 2.1 Printer Specifications

1 -22 2.1.1 Printer specifications

1 -22 2.1.2 Printer service life

1 -23 2.1.3 Print head service life

1 -23 2.2 Paper Specifications

1 -23 2.2.1 Paper sizes and weights

1 -23 2.2.2 Paper types and settings

1 -23 2.2.3 Printable area

1 -23 2.3 Print Head Specifications

1 -23 2.4 Printer and Scanner Drivers

1 -24 3. PRODUCT CODE LIST

Part 2: TROUBLESHOOTING

2 - 1 1. PRINTER OPERATION

2 - 1 1.1 Printer Operation

2 - 1 1.2 Status Indicator

2 - 2 1.3 Simple Printer Operations

2 - 2 1.3.1 Cleaning operation

2 - 2 1.3.2 Printing the nozzle check pattern

2 - 4 1.3.3 Roller cleaning operation

2 - 5 2. SERVICING

2 - 5 2.1 Before Troubleshooting

2 - 6 2.2 Detectable Problems from System Start to Exit

2 - 9 2.3 Troubleshooting Problems

2 -10 2.4 Troubleshooting Error Indications

2 -13 3. DISASSEMBLY AND REASSEMBLY

2 -13 3.1 Cautions for Disassembly and Reassembly

2 -13 3.1.1 Cautions against ink stains (ink path/ink mist)

2 -13 3.1.2 Damage due to static electricity

2 -13 3.1.3 Deformation of spur tips

2 -14 3.2 Exploded View

2 -15 3.3 Disassembly and Reassembly

2 -15 3.3.1 Carriage lock release

2 -16 3.3.2 Removing and installing tap screws

2 -16 3.3.3 Installing and removing the timing slit strip

2 -17 3.3.4 Handling the encoder film

2 -17 3.3.5 Removing and installing the logic board

2 -18 3.3.6 Removal of red screws prohibited

2 -18 3.3.7 Installing the logic board cover

2 -19 3.3.8 Installing the control ROM cover

2 -20 4. ADJUSTMENTS AND SETTINGS AFTER DISASSEMBLY AND

REASSEMBLY, AND CONFIRMATION OF OPERATION

2 -20 4.1 Adjustments and Settings after Disassembly and Reassembly

2 -20 4.1.1 Items for adjustment (per necessity/locations/tools)

2 -21 4.1.2 If EEPROM settings adjustment is necessary

2 -22 4.1.3 Print head position adjustment

2 -24 4.1.4 Print head seam stripe adjustment (S750)

2 -25 4.1.5 Grease Application

III

Page

2 -26 4.2 Confirmation method

2 -27 5. TRANSPORTING THE PRINTER

2 -27 5.1 Procedure

2 -28 6. PARTS REPLACEMENT, PERIODIC INSPECTIONS, & TOOLS

2 -28 6.1 Periodic Parts Replacement

2 -28 6.2 Periodic Inspections

2 -28 6.3 Tool List

2 -29 7. SERVICE-RELATED FEATURES

2 -29 7.1 Service Mode Operations

2 -30 7.2 Test Printout

2 -32 7.3 Printing the EEPROM Information

2 -34 7.4 Resetting the EEPROM

2 -34 7.5 Waste Ink counter settings (S900/S820)

Part 3: TECHNICAL REFERENCE

3 - 1 1. NEW TECHNOLOGY

3 - 1 1.1 Borderless printing

1.1.1 Borderless printing limitations

3 - 2 1.2 Quiet Mode

3 - 2 1.2.1 Quiet mode limitations

3 - 2 1.3 Remaining-ink amount detection (S900/S820)

3 - 2 1.3.1 Limitations when using the remaining-ink amount detection function

3 - 3 2. CLEANING MODES AND INK PURGE AMOUNTS

3 - 5 3. PRINT MODES

Part 4: APPENDIX

(S900)

4 - 1 1. CONNECTOR LOCATIONS AND PIN CONFIGURATIONS

4 - 1 1.1 Logic Board

4 - 4 1.2 Carriage Board

4 - 5 1.3 Print Head

(S820)

4 - 6 1. CONNECTOR LOCATIONS AND PIN CONFIGURATIONS

4 - 6 1.1 Logic Board

4 - 9 1.2 Carriage Board

4 -10 1.3 Print Head

(S750)

4 -11 1. CONNECTOR LOCATIONS AND PIN CONFIGURATIONS

4 -11 1.1 Logic Board

4 -14 1.2 Carriage Board

4 -15 1.3 Print Head

(S520)

4 -16 1. CONNECTOR LOCATIONS AND PIN CONFIGURATIONS

4 -16 1.1 Logic Board

4 -19 1.2 Carriage Board

4 -20 1.3 Print Head

4 -21 2.PROBLEMS LEFT REMAINING

III. ILLUSTRATION INDEX

Page Part 1: PRODUCT SPECIFICATIONS

(S900)

1 - 1 Figure 1 - 1 Printer Exterior (S900)

1 - 3 Figure 1 - 2 JEIDA Standard Pattern

1 - 3 Figure 1 - 3 JIS SCID No. 5

1 - 5 Figure 1 - 4 Printable Area

(S820)

1 - 9 Figure 1 - 5 Printer Exterior (S820)

1 -12 Figure 1 - 6 Printable Area

(S750)

1 -15 Figure 1 - 7 Printer Exterior (S750)

1 -18 Figure 1 - 8 Printable Area

(S520)

1 -21 Figure 1 - 9 Printer Exterior (S520)

Part 2: TROUBLESHOOTING

2 - 1 Figure 2 - 1 Operation Panel

2 - 3 Figure 2 - 2 Nozzle Check Pattern Printout

2 -14 Figure 2 - 3 Exploded View

2 -15 Figure 2 - 4 Carriage Lock Release

2 -16 Figure 2 - 5 Timing Slit Strip

2 -17 Figure 2 - 6 Short-Circuiting the Capacitors

2 -18 Figure 2 - 7 Do not Remove the Red Screws

2 -18 Figure 2 - 8 Installing the Logic Board Cover

2 -19 Figure 2 - 9 Installing the ROM Cover

2 -22 Figure 2 -10 Print Position Alignment Pattern

2 -24 Figure 2 -11 Seam Stripe Adjustment Pattern

2 -25 Figure 2 -12 Grease application

2 -30 Figure 2 -13 Service/Factory Test Printout (Sample)

2 -32 Figure 2 -14 EEPROM Information Printout (Sample)

Part 3: TECHNICAL REFERENCE

3 - 2 Figure 3 - 1 Remaining Ink amount detection

Part 4: APPENDIX

(S900)

4 - 1 Figure 4 - 1 Logic Board

4 - 4 Figure 4 - 2 Carriage Board

4 - 6 Figure 4 - 3 Print Head

(S820)

4 - 6 Figure 4 - 4 Logic Board

4 - 9 Figure 4 - 5 Carriage Board

4 -10 Figure 4 - 6 Print Head

(S750)

4 -11 Figure 4 - 7 Logic Board

4 -14 Figure 4 - 8 Carriage Board

4 -15 Figure 4 - 9 Print Head

(S520)

4 -16 Figure 4 -10 Logic Board

4 -19 Figure 4 -11 Carriage Board

4 -20 Figure 4 -12 Print Head

IV. TABLE INDEX

Page Part 1: PRODUCT SPECIFICATIONS

(S900)

1 - 7 Table 1 - 1 PRODUCT CODE LIST

(S820)

1 -14 Table 1 - 2 PRODUCT CODE LIST

(S750)

1 -20 Table 1 - 3 PRODUCT CODE LIST

(S520)

1 -24 Table 1 - 4 PRODUCT CODE LIST

Part 2: TROUBLESHOOTING

2 -10 Table 2 - 1 ERROR INDICATIONS

2 -21 Table 2 - 2 EEPROM SETTINGS WHEN REPLACING THE INK ABSORBER

Part 3: TECHNICAL REFERENCE

3 - 3 Table 3 - 1 CLEANING MODES

3 - 5 Table 3 - 2 PRINT MODES

Altri manuali per S520

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Canon Stampante

Canon

Canon imagePROGRAF iPF825 MFP Basic Guide No.1 Manuale utente

Canon

Canon NP6251 Manuale utente

Canon

Canon Pixma IP2870S Guida all'installazione

Canon

Canon laser Shot LBP 3300 Istruzioni di installazione e manutenzione

Canon

Canon imageCLASS MF4100 Series Guida di sicurezza

Canon

Canon 1418C025 Manuale utente

Canon

Canon PIXMA iP4000R Series Manuale utente

Canon

Canon PIXMA MP240 Manuale utente

Canon

Canon PIXMA MG7500 Series Manuale utente

Canon

Canon BJC-80 Manuale utente

Canon

Canon Color image RUNNER LBP5360 Manuale utente

Canon

Canon Pixma TR7660A Manuale utente

Canon

Canon iP90 - PIXMA Color Inkjet Printer Manuale utente

Canon

Canon imagePROGRAF W8400 Manuale utente

Canon

Canon PIXMA MX882 Series Manuale

Canon

Canon imagePRESS C10010VP Manuale utente

Canon

Canon PIXMA IP5300 Manuale utente

Canon

Canon LR1 Manuale utente

Canon

Canon NP6317 Manuale utente

Canon

Canon PIXMA E300 series Manuale utente

Canon

Canon MP980 series Manuale utente

Canon

Canon i-SENSYS LBP236dw Manuale utente

Canon

Canon PIXMA mini260 Manuale utente

Canon

Canon iP3000 - PIXMA Photo Printer Manuale utente

Manuali Stampante popolari di altre marche

Lexmark

Lexmark 1400 Series Manuale

Evolis

Evolis Elypso Manuale utente

Kyocera

Kyocera FS-9530DN Manuale utente

Samsung

Samsung BIXOLON SRP-350plusF Manuale utente

Dell

Dell Color Laser Printer 2130cn Manuale utente

Tektronix

Tektronix Phaser 840 Manuale utente

Epson

Epson ET-7750 Istruzioni operative

Eltron

Eltron P210 Guide Manuale utente

Ricoh

Ricoh MD-P1 Manuale utente

Epson

Epson SC-F7100 series Manuale utente

Epson

Epson Stylus C40UX Manuale utente

IRA3D

IRA3D POETRY4 Manuale utente

Ricoh

Ricoh Aficio AP400 Manuale utente

BIXOLON

BIXOLON SRP-352plusV Manuale utente

Epson

Epson Stylus Photo PX700W Istruzioni per il montaggio

Ricoh

Ricoh SP204SF Manuale utente

Star Micronics

Star Micronics futurePRNT TSP100 Manuale utente

Epson

Epson TM-TM88V-i Manuale per l'uso e la cura