Canon MLT (S) Manuale utente

Before using the instrument, be sure to read this manual thoroughly.

Also, read the manuals of other instruments in this system.

Keep the manual where it is easily accessible.

User’s Manual

MLT (S)

CXDI Image Processing Software

Please Note

1. In no event will Canon be liable for direct or indirect consequential damage arising out of the use of this

product. Canon will not be liable for loss of image data due to any reason.

2. Please have this product installed by Canon representative or distributor.

3. Canon reserves the right to change the specifications of the product without prior notice.

Under copyright laws, this manual may not be copied, in whole or in part, without the written consent of

Canon.

Contents

1. Overview ..................................................................................................... 1

1.1 About MLT (S) ........................................................................................................... 1

1.2 Available Functions of MLT (S) ................................................................................. 2

2. Edit Exposure Mode Settings ...................................................................... 3

2.1 Procedures to Set Exposure Mode ........................................................................... 3

2.2 Setting Enhancement ................................................................................................ 7

2.3 Setting Noise Reduction ............................................................................................ 8

2.4 Setting Dynamic Range Adjustment ......................................................................... 9

2.4.1 Setting high-density sections ............................................................................. 9

2.4.2 Setting low-density sections ............................................................................. 10

3. QA Mode Settings ..................................................................................... 11

3.1 Procedures to Change Parameters ......................................................................... 11

3.2 Changing Enhancement .......................................................................................... 14

3.3 Changing Noise Reduction ..................................................................................... 15

3.4 Changing Dynamic Range Adjustment ................................................................... 16

3.4.1 Changing high-density sections ....................................................................... 16

3.4.2 Changing low-density sections ........................................................................ 17

4. QA Parameters ......................................................................................... 18

Notation Conventions

Notation 1

In this manual, the name of button is enclosed with a pair of brackets [ ], and the buttons that are selected in succession

are connected with > to indicate the order.

Example: On the Exposure screen, touch the followings:

[SYSTEM] > [EDIT EXPOSURE MODE]

Notation 2

If any detailed explanation for the operation or setting is available on other page in this manual, the page to refer is indi-

cated with (→page number).

Example: Please set the parameters by referring to 2.2 Setting Enhancement (→P. 7 ) .

Notation 3

When description of the procedure or setting continues from an odd-numbered page (right page) to the subsequent even-

numbered page (left page), a small note, [Continued on the following page »] appears at the bottom-right of the odd-

numbered page to draw your attention.

– 1 –

1. Overview

1.1 About MLT (S)

NOTE: This user’s manual is for version 7.1 and later of the CXDI System Software.

The CXDI Image Processing Software MLT (S) (called “MLT (S)” in this manual) is

designed to extend the image processing functions provided with the CXDI series of Canon dig-

ital radiography system (called “CXDI” in this manual).

By installing MLT (S) on the Control PC, the advanced image processing features of MLT (S)

are brought into full scope both in the Edit Exposure Mode and QA Mode.

QA Mode Screen Extended by MLT (S) (ENHANCEMENT Tab)

QA Mode Screen Extended by MLT (S) (DYNAMIC RANGE Tab)

1.Overview

– 2 –

1.2 Available Functions of MLT (S)

This manual describes the operating procedures of the following image processing function that

is available with MLT (S). For details and information on other image processing functions,

please refer to Operation Manual and Setup Guide.

Enhancement

This accentuates edge details and local contrast of the exposure image for improving

sharpness.

The degree of enhancement can be adjusted by setting the edge enhancement parameters.

The frequency band for edge enhancement can also be modified by setting the edge

frequency parameters.

The degree of enhancement of the local contrast can be adjusted by setting the contrast

boost parameters.

Noise Reduction

This reduces noise in the exposure image for improving granularity.

The EFFECT parameter setting can be used to adjust the degree of noise reduction.

Dynamic Range Adjustment

This improves the detectability of high-density and low-density areas in the exposure

image.

The settings for the maximum density parameter and minimum density parameters can

be used to adjust the dynamic range.

NOTE: The effects resulting from changes to the parameters may be difficult to check

in the exposure image of the QA mode screen.

In these cases, check by touching [MAG.] or [QA-MAG.] to display the

enlarged screen.

Continued on the following page >>

– 3 –

2. Edit Exposure Mode Settings

2.1 Procedures to Set Exposure Mode

1Display the Edit Exposure Mode screen

On the Exposure screen, touch the followings:

[SYSTEM] > [EDIT EXPOSURE MODE]

Edit Exposure Mode Screen

2Select the Sensor Unit

If two or more sensor units are being used in the system, touch the Sensor Unit button,

then select the Sensor Unit.

3Select the Category tab

If eight or more categories are registered in the system, touch the or button to dis-

play the Category tabs that are not currently visible.

Sensor Unit

Button

Category Tab Exposure Mode

2.Edit Exposure Mode Settings

– 4 –

4Select the Exposure Mode

Make sure that [EDIT PARA.] at the top-left is displayed in highlight, then select the

desired Exposure Mode.

The EDIT PARA. screen appears.

EDIT PARA. Screen (PREVIOUS PAGE)

5Display the next page

Touch [NEXT PAGE].

EDIT PARA. Screen (NEXT PAGE)

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Canon Software

Canon

Canon EOS DIGITAL REBEL XT/350D DIGITAL Manuale utente

Canon

Canon 0273B001 - Elura 90 Camcorder Manuale utente

Canon

Canon 1629B001 - XH G1 Camcorder Manuale utente

Canon

Canon Elura 60 - Elura 60 MiniDV Camcorder Manuale utente

Canon

Canon VBCollector Manuale utente

Canon

Canon CanoScan D1230UF Manuale utente

Canon

Canon DIM-538 Manuale utente

Canon

Canon Powershot S80 Guida di sicurezza

Canon

Canon PowerShot A520 Manuale utente

Canon

Canon BJC-S830D Guida utente

Canon

Canon 9540A003 - Optura 400 Camcorder Manuale utente

Canon

Canon WebView Livescope Manuale utente

Canon

Canon 3508B001 - PowerShot D10 Digital Camera Guida di sicurezza

Canon

Canon ZR90 Manuale utente

Canon

Canon FAXPHONE L170 Guida rapida

Canon

Canon ScanGear CS-S 4.3 Manuale utente

Canon

Canon 3211B001 - PowerShot E1 Digital Camera Guida di sicurezza

Canon

Canon REALiS SX80 Mark II D Manuale di istruzioni

Canon

Canon Optura Pi Manuale utente

Canon

Canon REALIS WUX10 MARK II D Manuale utente

Canon

Canon CANOSCAN N650U Manuale utente

Canon

Canon 3000F - CanoScan Scanner Manuale utente

Canon

Canon CR-1 Mark II Manuale utente

Canon

Canon CanoScan FB 1200S Manuale utente

Manuali Software popolari di altre marche

COMPRO

COMPRO COMPROFM Manuale utente

Muratec

Muratec OFFICEBRIDGE ONLINE Manuale utente

Oracle

Oracle Contact Center Anywhere 8.1 Manuale utente

Adobe

Adobe 65007312 - Photoshop Lightroom Manuale

Avaya

Avaya NULL One-X for RIM Blackberry Manuale utente

HP ProLiant BL420c Manuale utente

PS Audio

PS Audio PowerPlay Manuale del proprietario

Brady

Brady LOCKOUT PRO 3.0 Manuale di servizio

Avaya

Avaya Interaction Center Manuale utente

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manuale

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manuale utente

Oracle

Oracle Application 9i Manuale utente

Acer

Acer RDM Manuale utente

Samsung

Samsung Auto Backup Manuale utente

Polycom

Polycom Vortex EF2201 Istruzioni per l'installazione e il funzionamento

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manuale utente

Novell

Novell SP2 - S Manuale di istruzioni

Lexmark

Lexmark Apps Manuale di servizio